Summary
These remote positions serve as an expert engineer performing technical consultation, guidance, and leadership; reviewing; and engineering analysis with the Bureau of Indian Affairs, Central Office, Office of Trust Services, Duty Station TBD upon selection.
This is an Open Continuous Announcement to fill multiple vacancies utilizing the Direct-Hire Authority (5CFR 337.201). Category rating, veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy.
This job is open to
Clarification from the agency
ALL U.S. CITIZENS. DIRECT HIRE AUTHORITY: These positions will be filled using Direct Hire Authority for this occupation. CTAP and ICTAP candidates in the local commuting area.
Duties
- Serves as an expert engineer providing civil engineering consultation and advisement to senior leadership, program officials, and colleagues on engineering projects, analysis, recommendations, and study conclusions.
- Develops engineering policies, technical guidelines and standards, and/or project or study objectives.
- Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence, ensuring documents are accurate and quality assurance processes were followed.
- Plans, develops, directs, and prepares procedures, policies, and protocols for engineering studies and special projects that require advanced engineering analysis.
- Develops/reviews engineering specification, Statement of Work and other design/construction documents for dam safety engineering activities, including risk analysis, risk mgmt., EAPs, EWS, security, design, construction, inspections, and evaluations.
- Uses expert knowledge in technical areas related to dam safety to ensure compliance with Bureau, Departmental, and Federal design standards.
Requirements
Conditions of Employment
- U.S. Citizenship Required
- You will be required to have federal payments made by Direct Deposit
- You may be required to successfully complete a probationary period
- A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
- If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- This position has been designated as an Incidental Operator under the Indian Affairs Motor Vehicle Safety Program, therefore, the incumbent will be required annually to acknowledge and certify possession of a valid state driver's license.
- Registration as a Professional Engineer is a requirement.
Qualifications
EXPERIENCE AND EDUCATION REQUIREMENTS: (OPM Operating Manual, Qualification Standards for Professional and Scientific Positions, GS-0800, All Professional Engineering Positions)
Basic Requirements for All Professional Engineering Positions, GS-0800 Series:
1. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
2. Combination of education and experience--college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure--Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses--Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum--Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
ADDITIONAL EXPERIENCE REQUIRED: In addition to meeting the basic entry level qualification requirements, applicants must have the following:
GS-13: One year of specialized experience or the equivalent, comparable to at least the GS-12 in the Federal Service (obtained in either the public or private sector. Specialized experience includes expertise of the theories, principles, practices, and techniques of civil engineering as applied to Dam Safety including: risk analysis, risk management, EAPs, EWS, security, design, construction, inspections, and evaluations. Experience preparing and reviewing engineering specification documents, Statement of Work (SOW), Independent Government Cost Estimates (IGCE), and associated documents for award and administration of Task Orders and Contracts in support of dam safety engineering activities. Experience in the development, implementation, and oversight of guidelines for risk analysis, emergency management, and evaluation of existing dams. Experience in performing in-depth analysis of program weaknesses, identifying needed changes, and providing direction for change implementation. Experience working with personnel in Tribes, other bureaus/services in the Department, and with Federal and non-federal agencies regarding dam safety issues of common interest and making specific recommendations to achieve program goals.
SELECTIVE PLACEMENT FACTOR: This is a MANDATORY qualification prerequisites to qualify for this position. The applicant must have possessed the following to be considered eligible for this position:
- Registration as a Professional Engineer (PE). Candidate must be currently registered as a professional engineer which has responsibility for making highly technical engineering decision for high hazard dams, power and irrigation structures which could affect the public safety of dam operators, irrigation workers, and nearby populations if the dams or structures fail to operate correctly. Engineering policy decisions for the Irrigation, Power, and Safety of Dams Programs involving public safety must be done or approved by a Registered Professional Engineer.
NOTE: Selective factors are knowledges, skills, abilities, or special qualifications that are in addition to the minimum requirements in a qualification standard, but are determined to be essential to perform the duties and responsibilities of the position. Applicants who do not meet the selective factor are ineligible for further consideration. You MUST provide a current copy of your Registration as a Professional Engineer (PE) documentation when submitting your application.
All qualification requirements must be met by the closing date of this announcement.
Additional selections may be made from this announcement if identical vacancies occur within 90 days from the closing date.
Education
If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.
If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.
One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your resume will be evaluated after the closing date to determine whether you meet the minimum qualification requirements for this position described above.
Under this Direct-Hire announcement, all applicants who meet the minimum requirements at the grade level for which they apply will be forwarded to the Selecting Official for consideration. Veteran's Preference and category rating DO NOT APPLY for this announcement under Direct-Hire Authority regulations.
All qualified candidates will be referred for consideration; the hiring office may conduct interviews at their discretion.
If an applicant's resume is incomplete or does not support the requirements for minimum qualifications or specialized experience a rating of "ineligible" or "not qualified" will be applied and no consideration for employment will be granted.
You may preview the assessment questions here in the https://apply.usastaffing.gov/ViewQuestionnaire/12400336. Additional selections may be made from this announcement if identical vacancies occur within 90 days from the closing date.
DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume/application does not support your Assessment Questionnaire answers, we will not allow credit for your response(s). Your resume must contain sufficiently detailed information upon which to make a qualification determination. Please ensure that your resume contains specific information such as position titles, beginning and ending dates of employment for each position, average number of hours worked per week, and if the position is/was in the Federal government, you should provide the position series and grade level.
If a determination is made that an applicant has inflated qualifications or experience on the resume, the applicant will receive no consideration for the position, as per OPM regulations.
Required Documents
The following documents are required for this position:
- Resume which details work experience including dates worked (mm/yy-mm/yy); position title; position series and grade (if federal service); work schedule; hours worked per week; relevant duties performed; supervisor with contact information, and 3 professional references and contact information (Do not include current/former supervisors), etc. Important! If your resume does not show complete information for each job entry, your application will be considered incomplete. Specifically:
- On-line Assessment Questionnaire
- Legible Copy of Transcripts (if using education to qualify) - Unofficial transcripts are acceptable; however, an official transcript will be required before entrance on duty.
- BIA Form 4432 The Form BIA-4432 must be completed as stated in the Instructions on the Form and this form with must be submitted with your application for Federal employment (if claiming Indian preference).
- Copy of current Registration as a Professional Engineer (PE).
- If you are applying under CTAP and ICTAP, you MUST submit proof of eligibility under 5 CFR 330.602(a) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of your most recent performance rating, and a copy of your most recent SF-50 (Notification of Personnel Action) showing your position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP or ICTAP eligible.
If you are unable to apply online, require reasonable accommodation in the application process if you are an applicant with a disability, or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
ALL DOCUMENTS MUST BE RECEIVED BY 11:59 PM Eastern Time ON THE CLOSING DATE OF THIS ANNOUNCEMENT. If your application package is incomplete in any way, you will not be considered for this position, and requests for extensions will not be granted. Please double check your application package before you submit it.
ADDITIONAL INFORMATION WILL NOT BE SOLICITED OR ACCEPTED BY THIS OFFICE.
How to Apply
ONLINE APPLICATION SUBMISSION:
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
To begin, click Apply to access the online application.
You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your résumé and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position.
Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login ); all of your applications will appear on the Welcome screen.
The Application Status will appear along with the date your application was last updated.
For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
PLEASE NOTE - NO APPLICATION MATERIAL WILL BE ACCEPTED VIA E-MAIL.
Next steps
Once you submit all the required documents and the online application in USAJOBS, you will receive an acknowledgement email that your submission was successful. After the evaluation process is complete, you will be notified of your status and/or referral to the hiring official. If further evaluation or interviews are required, you will be contacted.
You will be notified if this job is filled or canceled. Timelines for this process vary widely.
You may check the status of your application at any time by logging in to your USAJobs Account. This office will not respond to requests for status updates.
|