AERIAL DELIVERY SPECIALIST - TITLE 32

Clarification from the agency

Open to all members of the Army National Guard.

As an Aerial Delivery Specialist, WG-5210-10, you will:

Inspect a variety of airdrop equipment such as parachutes, multi loop lines, extraction force transfer couplings, latch assembly couplings, cable assembly couplings, actuator assembly, release cargo parachute M-1, lanyard arming wire, connector parachute, timer delay assembly, link lower suspension, link assembly single suspension type IV, link assembly heavy duty, link 4 point, parachute release single knife, bracket suspension, and tie down cargo quick release.

Perform visual, dimensional, hands on, and operational inspection of the above listed equipment at the prescribed times. These inspections are in accordance with warnings, cautions, Army Regulations (AR), Technical Manuals (TM), Field Manuals (FM) and Department of Army Pamphlets (DA PAM, Safety of Use Messages (SOUM), and notes and Ground Precautionary Messages (GPM), for airborne safety.

Make judgmental decisions on proximity to tolerances and interrelated dimensions on timer delay systems of M-1 release, latch assembly couplings, cable assembly couplings, and actuator assembly.
Inspect for burrs, tears, significant fraying, rough spots, corrosion, pits, cracks, welds, cuts, foreign material, bends, damaged threads, adjusting collars, set screws, shank pins, and timers activate within specifications.
Use a wide variety of inspection processes and techniques, and many unique and specially designed instruments and gauges (i.e., tension meters, scales, micrometers, gauges, torque wrenches, tests sets, porosity, oxygen test sets, altitude chambers, altimeters, and protractors).

Prepare and conduct inspections of sling load equipment and sling load operations.

Perform duties as inspector testers, pack-in-process inspector and final inspector.

Perform initial inspection on all parachutes, textile and non-textile components, and airdrop containers.

Conduct regular testing of parachute and newly issued airdrop equipment.

Drop-test troop-type personnel parachute to check proficiency.

Inspect and classify airdrop items to determine whether items are serviceable, repairable, or beyond economical repair.

Inspect airdrop equipment repairs and parachute packing.

Inspect air items to ensure manufacturer and Army quality control.

Assist supervisory personnel in receiving, maintaining, and issuing supplies, as well planning work requirements and yearly forecasting.

Perform prioritized airdrop inspections, sequential work is determined, and pertinent ARs, TMs, FMs and DA PAMs have been reviewed.

Independently perform assignments at the Aerial Delivery Logistics Facility (ADLF) when the supervisor is not present.

Perform three separate inspections of airdrop loads/containers prior to the actual airdrop.

Make decisions on a wide range of matters that may involve deviations and departures from past precedents and accepted practice or highly subjective judgments that could affect safety of flight and crew.

First inspect the AR 59-4 directed shop final inspection required for that specified type of load. The second inspection is the "before loading inspection". An airdrop Joint Air Drop Inspector (JAI) and Air Force Joint Airdrop Inspector (AFJAI) conduct joint inspections.

Complete the proper airdrop inspection form in the DD Form 1748 (Joint Airdrop Inspection Record) series and all sign the appropriate blocks to certify correct rigging of the load. The third inspection is "after loading inspection"; this is after the equipment is on board the aircraft and is rigged for flight and airdrop.

Perform inspection along with an AFJAI and the aircrew Load Master.

Focus on dimensions and weights of rigged airdrop loads IAW ARs, TMs, FMs, and DA PAMs. This includes highly specialized rigging of equipment and personnel loads for highly sensitive Special Operations Force (SOF) missions. SOF aerial delivery operations, includes preparation, outfitting, and inspection for delivery of personnel and equipment into maritime environments and exceptionally hazardous terrain.

Rig and prepare unilateral airdrop training loads to include type V or other airdrop platforms for airdrops.

Fabricate container delivery systems loads, skid boards, and other associated airdrop items.

Receive, unpack, and inspect unit parachutes.

Clean, dry, inspect, and pack cargo and personnel parachutes after use.

Maintain and repair a variety of fabric, rubber, and metallic equipment.

Operate and perform minor maintenance on sewing machines, punch presses, stenciling machines, and other similar equipment.

Perform inspections and repair of cargo, deceleration, and extraction parachutes, and is responsible for certification.

Perform Joint Airdrop Inspections as the aerial load inspector.

Perform technical order compliance modifications and modifications of parachutes and related items.

Perform other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• For positions requiring the operation of motor vehicles, candidates must have a valid state drivers license.
• Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
• Must be able to pass an AirbornePhysical (PHA) and graduate from Airborne school.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; overtime may be required.
• The duties and responsibilities of your job may impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Qualifications

Each applicant must fully substantiate (in her/his own words) that they meet the requirements of the specialized experience listed below; otherwise, the applicant will be considered unqualified for this vacancy. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. IF YOU DO THIS YOU WILL BE CONSIDERED UNQUALIFIED FOR THE VACANCY. Please ensure that you have included beginning and ending dates (month and year) for all jobs listed on your resume.

Military Grades: E2 - E7

Compatible Military Assignments: EMOS: 92R

General Experience: Must have experience which demonstrates that the candidate has the ability to organize assignments for subordinates, estimate material and manpower needed for specific jobs; able to explain manuals and work procedures; and to prepare production records, work records and reports.

Specialized Experience: Must have at least 18 months specialized experience which demonstrates the knowledge of appropriate cargo locations considering factors such as use, size and shape of cargo. Knowledge of storing and handling of hazardous cargo. Experience in weight and balance computations, distribution and palletizing of loads. Experience in using forklifts.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies:

• Ability to Inspect
• Inspection Management
• Knowledge of Equipment Assembly, Installation, Repair, etc
  

To apply for this position, you must submit a complete Application Package which includes:

Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

Other supporting documents:

• Proof of graduating from the "Airdrop Load Inspector" Course
• Proof of being a qualified "In-Process Inspector"
• Proof of being Certified as a "Malfunctions Officer"

Next steps