Duties
As a AIR CARGO SPECIALIST, WG-5201-10, you will perform a full variety of Air Transportation functions necessary to manage the day-to-day Air Transportation and small air terminal operations including but not limited to, airdrop and airdrop inspections, rigging responsibilities, wing deployment training, passenger and cargo manifesting, Joint Inspection, load planning, determining cargo/passenger eligibility, establishing and maintaining air terminal security, directly responsible for safe and efficient loading/offloading of all DOD-owned and controlled aircraft and ensuring In-transit Visibility (ITV).
(1) Inspects a variety of airdrop equipment such as parachutes, multi loop lines, extraction transfer force couplings, latch assembly couplings, cable assembly couplings, actuator assembly, release cargo parachute M-1, lanyard arming wire, connector parachute, timer delay assembly, link lower suspension, link assembly single suspension type IV, link assembly heavy duty, link 4 point, parachute release single knife, bracket suspension, and tie down cargo quick release. Performs visual, dimensional, and operational inspection of the above mentioned equipment at the prescribed times, in accordance with warnings, cautions, and notes and ground precautionary messages (GPM), for safety of flight. Makes judgmental decisions on proximity to tolerances and interrelated dimensions on timer delay systems of M-1 release, latch assembly couplings, cable assembly couplings, and actuator assembly. Inspects for burrs, rough spots, corrosion, pits, cracks, welds, cuts, foreign material, bends, damaged threads, adjusting collars, set screws, shank pins, and that timers activate within specifications. Uses a wide variety of inspection processes and techniques, and many unique and specially designed instruments and gauges (i.e., tension meters, scales, micrometers, gauges, torque wrenches, and protractors).
(2) Performs airdrop inspections after priorities are set, work sequences are determined, and pertinent policy matters have been reviewed. Independently performs assignments at the aircraft where the supervisor is not readily available. Performs three separate inspections of airdrop loads or containers rigged for airdrop prior to the actual airdrop. Makes decisions on a wide range of matters that may involve deviations and departures from past precedents and accepted practice or highly subjective judgments that could affect safety of flight and crew. The first inspection is a rigger inspection required by the field manual or technical order for that particular type of load. The second inspection is the "before loading inspection". Conducts inspections jointly with the Air Force Joint Airdrop Inspector (AFJAI). Completes the proper airdrop inspection form in the DD Form 1748 (Joint Airdrop Inspection Record) series and all sign the appropriate blocks to certify correct rigging of the load. The third inspection is on board the aircraft after the load is rigged for flight and airdrop. Performs inspection along with an AFJAI and the aircrew Load Master. Applies a variety of sophisticated techniques to inspect specialized and complex aircraft systems in accordance with Load Master's Manual. Inspects systems i.e. dual rail and lock settings and hydraulic systems for ramp and door and ADS arms for the ramp. Focuses on dimensions of rigged airdrop loads IAW 13C5 (Parachute Cargo Repack Manual) and 13C7 (Rigging Loads for Special Operations) T.O. series; extraction/deployment systems; emergency aft restraint provisions; type and number of recovery parachutes; proper tension on pendulum line IAW-9, and hazardous cargo certification IAW AFJMAN 24-204 (Preparing Hazardous Materials for Military Air Shipments).
(3) Rigs and prepares unilateral airdrop training loads to include type V or other airdrop platforms for airdrops. Fabricates container delivery systems loads, skid boards, and other associated airdrop items, as required. Receives, unpacks, and inspects unit possessed parachutes. Cleans, dries, inspects, and packs cargo parachutes after use. Maintains and repairs a variety of fabric, rubber, and leather articles. Operates and performs minor maintenance on sewing machines, punch presses, stenciling machines, and other similar equipment. Performs inspections and repair of cargo, deceleration, and extraction parachutes, and is responsible for certification. Performs Joint Airdrop Inspections as the aerial port inspector. Performs technical order compliance modifications and modifications of parachutes and related items.
(4) Performs other additional duties as assigned.
Requirements
Conditions of Employment
Military Grades: E1-E6
Participation in direct deposit is mandatory.
For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
CONDITIONS OF EMPLOYMENT & NOTES:
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
4. May occasionally be required to work other than normal duty hours; overtime may be required.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
6. Wear of the military uniform is MANDATORY.
Qualifications
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).
GENERAL EXPERIENCE: Experience or training which demonstrates the knowledge of equipment and practices associated with the type of work to be done.
SPECIALIZED EXPERIENCE: Must have18 months experience or training in verifying cargo against manifest and inspecting for damage or unusual condition of shipment; experience which demonstrates the knowledge of appropriate cargo locations considering factors such as use, size, shape of cargo. Knowledge of storing and handling of hazardous cargo; experience in weight and balance computations, distribution and palletizing of loads; experience in using forklifts; experience in using automated or manual means to complete air movement records or reports; experience in operating sewing machines, punch presses, and stenciling machines; experience in inspecting parachutes and identifying defective equipment; experience in using navigational aids to determine timing points and marking drop zones
If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager.
NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor.
b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment.
c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social).
d. Final selection will be based upon qualifications, suitability, and available manpower resources.
e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization.
f. Multiple vacancies may be filled from this announcement.
g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.
Education
No substitution of education for specialized experience.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12789975~
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.