Qualifications
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-2800 ELECTRICAL AND INSTALLATION AND MAINTENANCE FAMILY.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2800 ELECTRICAL AND INSTALLATION AND MAINTENANCE FAMILY. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is the ability to perform the work of an AIRCRAFT ELECTRICIAN (AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC) with little to no supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of safety regulations and procedures. Thorough knowledge of the interface of electrical systems with hydraulic, electronic armament, instrument, and mechanical systems and assemblies. Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices (e.g., meters, "breakout boxes", signal generators, oscilloscopes, phase indicators, and capacitance testers) to analyze, correct, and maintain essentially all electrical systems on fixed or rotary wing aircraft.
2. Skill to trace hard to locate and intermittent electrical defects and problems using a variety of meters and test devices. Skill in repairing and replacing electrical equipment and components throughout the aircraft. Skill in performing initial and final functional and operational checks on the entire aircraft electrical system.
3. Skill in the setup and operation of computerized multiple circuit analyzing equipment in manual, semiautomatic, or automatic mode to run existing and new (i.e., not fully "debugged") diagnostic programs to test and analyze aircraft electrical circuitry and interconnecting cabling of systems such as navigational computers, radar, and related equipment and to repair discrepancies.
4. Skill in installing, calibrating, and operational testing of fuel indicating, antiskid, autopilot, compass, and similar systems. Skill to assemble a variety of locally developed test devices (e.g., "breakout boxes and panels") utilizing switches, diodes, resistors, relays, terminal boards, wiring harnesses, and other similar components; and skill to calibrate and adjust components such as amplifiers, proximity boxes, generators, and voltage regulators.
5. Ability to lay out connecting circuits and make connections to prevent equipment or circuit overload or malfunction by considering such factors as fuse and circuit breaker capacity, wire size and length, voltage drop, type of current, phasing and sequencing power tie-ins, and method of shielding.
6. Ability to research aircraft modification history, technical orders, engineering change proposals, and manuals concerning wire codes, wiring configuration, and testing procedures. Ability to assist engineering personnel in developing modifications and changes on electrical, electronic, instrument, and other integrated electrical systems; and to assist programming personnel in developing, debugging, or modifying diagnostic programs by recommending changes where necessary and identifying apparent contradictions between technical guides and test programs.
OTHER SIGNIFICANT FACTS:
1. This is an Air Reserve Technician (ART) enlisted position. The incumbent is required to meet and maintain Air
Force Reserve requirements. Work schedule will be aligned to allow the incumbent to fully participate in unit training
assemblies. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be
assigned non-ART duties, generally not to exceed 30 percent of total responsibilities.
2. The incumbent must obtain and retain the appropriate security clearance level designated for the position.
3. This is a Testing Designated Position (TDP). The employee is subject to random drug testing. The incumbent is
subject to pre-employment drug testing and participation in random drug testing as a condition of employment.
Drug Test requirement was modified with AFI 90-508, Air Force Civilian Drug Demand Reduction Program, 28
August 2014; Certified Current 18 December 2015 which supersedes AFI 44-107, 7 April 2010. Positions covered
by this SPD must be reviewed for proper "Testing Designated Position (TDP)" coding to comply with the AF
Civilian Drug Demand Reduction Program (AFI 90-508). Drug testing is a condition of employment.
4. The incumbent may be required to fly in military and/or commercial aircraft to perform temporary duty
assignments (TDY) away from the normal duty station.
5. The incumbent may be required to work overtime to meet workload demands.
6. Performs other duties as assigned.
FUNCTIONAL REQUIREMENTS: Heavy lifting (up to 40 lbs). Two man lift for items exceeding 40 lbs. Heavy carrying (40 lbs). Reaching above the shoulder. Use of fingers. Both hands required. Hours of walking are approximately 4 hours/day. Hours of standing are approximately 4 hours/day. Hours of repeated bending are approximately 4 hours/day. Climbing, use of legs and arms. Both legs required. Operation of special purpose and/or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted). If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate.
ENVIRONMENTAL FACTORS: Work is performed in hangar areas, outdoors, in/on aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, hazardous fluids, particulates, and gases). Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, explosive hazards and Low Observable (LO). Subject to eye damage due to exposure to LASERs. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others or working alone.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.