Duties
1) Performs functional tests, analyzes performance and troubleshoots the electronic, electrical, hydraulic, pneumatic and mechanical functions of the subsystems integrated into the digital brake/antiskid system, maintenance annunciation panel (MAP) system of the integrated main generator, standby generator, emergency generator, flight control power, AC/DC power distribution and sub-systems integrated into the electronic/electrical and environmental systems. Interprets analog and digital operational and output characteristics and results from the Maintenance Annunciation Panel (M.A.P.), onboard computers, aircrew debriefings and specialized test equipment. The electrical system includes the electrical power generation and distribution system, the fire detection and extinguishing system, the ice and rain protection system, the landing gear system, the interior and exterior lighting system, the oxygen generation and distribution system, and the auxiliary power system. The environmental system includes compression, distribution, pressurization, heating, cooling, temperature control, moisture/air contamination control, and liquid cooling requirements.
(2) Removes, repairs, calibrates, installs, aligns, inspects, and conducts operational performance checkouts on the components of the electronic/electrical and environmental systems. Analyzes malfunctions using schematics, logic and wiring diagrams, computer data, and factory drawings. Diagnoses circuit operating characteristics using on-board computer, special test equipment and laptop computers to isolates problems to the failing component. Removes and replaces components or assemblies down to the lowest level authorized by depot. Performs organizational and intermediate level maintenance modifications as required. Performs recurring inspections and system tests of the life support and the electronic/electrical and environmental system to certify aircraft are ready for flight. Modifies and updates electrical and environmental support equipment according to applicable technical publications. Maintains and operates various types of test equipment such as oscilloscopes, diagnostic computers, digital and analog multi-meters, constant speed drive test stands, voltmeters, ammeters, etc. Performs precise and advanced wiring maintenance procedures on aircraft. Utilizes computer data and specialized test equipment to interpret equipment analog/digital operational characteristics to isolate malfunctions in the appropriate sub-systems. Interprets electronic terms and symbols, and applies a variety of electronic formulas, tables and charts in order to perform fault isolation and repairs to systems and sub-systems, such as the 1553 data bus's, BUS Interface Unit (BIU), BUS Adapter Unit (BAU), F-16 Electrical Multiplexing System (EMUX), the C130J Enhanced Cargo Handling/Arial Delivery System (ECHS/ADS) and the F-15 Engine Modification from the PW100-200 to the PW100-220 which incorporates a Digital Electronic Engine Control (DEEC).
(3) Provides technical guidance, advice and/or assistance to other work centers on the interrelationship of electronic/electrical and environmental systems and their respective system, to include flight controls, offensive fire control radar, weapon release, communications, hydraulic, fuel, engine and egress.
(4) Processes and accounts for supply assets in the repairable processing system to maintain aircraft records, inspection records, and equipment maintenance in computer systems (CAMS). Documents maintenance actions and man-hour expenditures on maintenance forms and computer systems. Clears Red X symbols on maintenance forms as authorized, and performs electronic/electrical and environmental system debriefing of aircrews. Recommends methods (AFTO Form 22) to improve equipment performance and maintenance procedures, i.e., data corrections to correct software or technical order deficiencies. Processes and accounts for due-in-from maintenance (DIFM) supply assets. Documents maintenance repair actions, man-hour accounting, maintenance forms, and computer systems. Maintains historical data of repaired components, Line Replaceable Units (LRUs) and test equipment.
(5) Inspects, tests and performs operative maintenance on cryogenic and gaseous oxygen and nitrogen servicing equipment. Is able to provide a thorough inspection of the complete electronic/electrical and environmental, and other systems, of the aircraft during special and phase inspections.
(6) Provides on-the-job training to lower grade personnel concerning repair of the electronic/electrical and environmental equipment, aircraft system line replaceable units (LRUs), and aircraft electrical/environmental systems. Also provides on-the-job training (OJT) for newly assigned personnel.
DUTIES CONTINUED ON EDUCATION
Requirements
Conditions of Employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.
Military Grades: Enlisted
- Minimum Military Grade: NLT E-5 (SSgt)
Compatible Military Assignments: Selectee must be a member of the Arkansas Air National Guard.
IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION.
Qualifications
GENERAL EXPERIENCE:
Experience or training which has provided a knowledge and skill in locating and tying in the electrical systems with the aircraft armament, electronics, and instrument systems; adjusting and calibrating the components of the various electrical systems; reading and interpreting blueprints, wiring diagrams and schematics.
SPECIALIZED EXPERIENCE:
Experience or training installing, maintaining, repairing and modifying electrical systems and major substation components of electrical system. Experience diagnosing malfunctions and determining remedy when complex relationships exists among different electrical system circuits requiring knowledge of all electrical units and systems. Experience making electrical repairs that require the use of precision measuring equipment and common hand tools.
Education
DUTIES CONTINUED:
(7) Prepares for and participates in various types of readiness evaluations such as Operational Readiness inspections (ORI), Inspector General (IG) inspections, Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform additional duties such as aircraft crew chief, hydrazine response, aircraft or equipment decontamination, structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a member of a team to assist local authorities with natural disasters or civil emergencies.
(8) Complies with safety, fire, security, and housekeeping regulations. Ensures that material, equipment and components are properly stored, protected and maintained.
(9) Performs other duties as assigned.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.