AIRCRAFT ENGINE MECHANIC Job in Sioux City, IA

Vacancy No. IA-12784899-AF-25-098 Department Air National Guard Units
Salary $30.99 to $36.15 Grade 10 to 10
Perm/Temp Permanent FT/PT Full-time
Open Date 8/19/2025 Close Date 9/2/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Sioux City, IA


Summary

IOWA AIR NATIONAL GUARD - TITLE 32 EXCEPTED SERVICE POSITION
This position is open to current military members of the 185th ARW, Sioux City, Iowa Air National Guard

LOCATION: 185th ARW, Sioux City, Iowa

This job is open to

Clarification from the agency

This position is open to current members of the 185th ARW, Sioux City, Iowa Air National Guard

Duties

As a AIRCRAFT ENGINE MECHANIC, WG-8602-10 your duties are below.

  1. Troubleshoots malfunctioning engines and interrelated propulsion system components, determines degree of disassembly or certification required, repairs or replaces defective components, diagnostic computers and associated hardware. Analyzes malfunctions using schematic and wiring diagrams, blueprints, manufacturer's specifications, computer diagnostics data, inspection findings, trending data and aircrew debriefs. Performs engine run operation on installed and uninstalled engines to troubleshoot malfunctions or verify findings. Removes and installs engines and auxiliary power units. Operates, Automated Ground Test Systems (AGETS), trouble-shoots and repairs aircraft jet engines.
  2. Troubleshoots, modifies, repairs, and performs sequential disassembly and assembly of gearboxes and auxiliary power units. Performs evaluations that must be accomplished at critical points in the repair/build-up process using a variety of quality characteristics, consisting of complete systems or components and assemblies that undergo many steps in a repair process and have highly critical tolerances. Performs test cell operation of engine and aircraft run up, analyzes operating parameters, makes final adjustments and verifies that engine is operating within acceptable parameters for safe operation in the aircraft.
  3. Performs scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems. Interprets Engine Management trend data and investigates trend anomalies to eliminate catastrophic engine failure or damage by the prediction and detection of adverse trends towards known failure modes before they occur.
  4. Performs command directed and locally established in-progress inspections (IPI) (certifying acceptable performance of all conventional or modified aircraft engines prior to their being installed in the aircraft or placed in inventory) of propulsion system components and associated equipment to determine adequacy of workmanship, materials and maintenance. Makes final certification of completed work and critical engine build measurements, annotating by signature that work and tolerances are correct. Certifies aircraft is safe for flight by Clearing Red X and other Red symbols.
  5. Requisitions, processes, and accounts for supply assets as required by the repairable processing system. Verifies compatibility of engine components. Performs computer data entry of engine and component information such as component location, status and tracking information into the Core Automated Maintenance System (CAMS) for fighter aircraft, and G081, (CAMS for Mobility) for multi-engine transport aircraft. Uses computer-based systems to account for time expenditures of maintenance performed.
  6. Provides technical advice and troubleshooting expertise to other work centers when propulsion systems affect or are affected by interrelated aircraft systems, such as: electro-environmental, pneudraulic, fuel and avionics systems.
  7. Provides on-the-job training to lower graded personnel or newly assigned personnel regardless of grade. Trains lower graded employees on proper certification techniques of installed engine components. Provides instruction in repair and inspection techniques of aircraft engine components and related equipment.
  8. Examines recurring malfunctions and initiates corrective actions by submission of quality deficiency or software deficiency reports. Devises repair procedures based on findings and recommends program changes or data corrections to correct software or technical data deficiencies. Recommends revisions to intermediate maintenance directives when necessary.
  9. Serves as the hazardous materials manager as required. Interprets and follows state and federal regulations regarding the reclamation, storage and transportation of hazardous materials.
  10. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) Inspections, Unit Effectiveness Inspections and mobility and command support exercises. Performs additional duties such as, hydrazine response, aircraft or equipment decontamination, structural fire fighting, fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, and assists local authorities during natural disasters or civil emergencies.
  11. Performs other duties as assigned. D16350

Requirements

Conditions of Employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Air National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 09/02/2025 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment.

Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED (E-6 and Below)

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration.

MINIMUM REQUIREMENTS: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade.

SPECIALIZED EXPERIENCE REQUIREMENTS: WG-8602-10: Must haveexperience in the following:
  1. Experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories.
  2. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and powertrains for fixed and/or rotary wing aircraft.
  3. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis.

Education

This job does not have an education qualification requirement.

Additional information

ENLISTMENT CASH BONUSES: Acceptance of a technician position may affect any bonus and/or educational assistance that may be applicable. Please contact your Education Office prior to accepting a position with the Iowa Army National Guard.
Participation in direct deposit is mandatory.

If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Knowledge, Skills and Abilities required for this position:

  1. Knowledge in installing, removing, operating, and repairing a variety of conventional and modified aircraft engines and engine accessories systems on and off the aircraft.
  2. Knowledge and understanding of jet engine theory and the integration of the jet engine with all aircraft systems to troubleshoot malfunctions and accomplish repairs.
  3. Knowledge and skill to operate a variety of test equipment, such as vibration analyzers, air data simulators, engine monitoring computer, data transfer equipment, dynamic propeller balancing equipment, high pressure hydraulic test equipment, voltmeters and other precision measurement equipment to troubleshoot, maintain, and repair aircraft engines on and off the aircraft.
  4. Skill and ability to interpret technical orders, manufacturer's catalogs, blueprints and schematic drawings, to obtain the technical information required to troubleshoot, overhaul, repair, modify, assemble and trim engines.
  5. Knowledgeable in understanding and applying technical order data, principles and practices to verify that essential quality requirements have been met, identify problem areas and recommend corrective action.
  6. Knowledgeable in understanding and interpreting engine trending data, to determine defects and failure rates on installed engines.
  7. Skill and knowledge to certify work in progress (IPIs) and upon completion, compare to required tolerances and specifications as identified in Technical Orders (TO)'s.
  8. Knowledge and understanding of mathematics to determine tolerances and performance specifications involved in engine buildup and test cell operations.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

  1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
  2. Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Christopher Powders
Address
IA 185th ARW
2920 Headquarters Ave
Sioux City, IA 51111-1300
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements