AIRCRAFT MECHANIC

Clarification from the agency

This position is open to current on-board Title 5 and Title 32 AASF 3 employees of the Iowa Army National Guard. Military membership is required.

As a AIRCRAFT MECHANIC, WG-8852-11 your duties are below.

1. Performs Crew Chief duties with full maintenance responsibility for assigned aircraft. Number of aircraft to be assigned to an incumbent is predetermined by taking into account such factors as the complexity, size, and maintenance requirements of aircraft, the unit mission requirement to have Flight Mechanic or Flight Engineer on board during missions, etc. Diagnoses problems with all aircraft system and components, perform required repairs and accomplishes required preventive maintenance. Serves as a point of contact for assigned aircraft, receiving written and verbal discrepancies from pilots and diagnosing problems. Documents deficiencies, malfunctions, and the repairs required to return aircraft to serviceable condition. Contacts Allied Shops personnel to perform specialist work in such areas as sheet metal, avionics, propeller-rotor, engine, etc., and oversees the work performed. Assigns and directs the work of one or more subordinate air- craft mechanic(s) to include less than journeyman level. Accompanies pilot during flights to locate discrepancies that are not evident during ground operation. May perform duties as a crew member (Flight Mechanic or Flight Engineer) during assigned missions on aircraft with that requirement.
2. Performs the full range of preventive maintenance, repair, and ground testing of aircraft system, assemblies, and surfaces. Using a variety of methods including test equipment, visual checks, and instruments diagnoses and identifies problem areas and determines the extent of repairs required. Removes components and assemblies, repairs or replaces defective parts and components, and reassembles repaired items into the aircraft. Installs, aligns, and makes needed adjusts to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc. Accomplishes adjustments to related systems which may be affected by repairs. Conducts ground functional tests of all aircraft systems. Accomplishes or monitors the performance of periodic inspection, daily inspections, refueliug/defueling of aircraft, and all servicing operations.
3. Plans and conducts a flight training program for drill status crew chiefs to include maintenance instruction for assigned aircraft, the use of hand and arm signals used, ground handling of aircraft, use of ground equipment, aircraft loading, hoist operations, emergency procedures, etc. Performs duties as a Flight Mechanic/Flight Engineer Bas required to carryout the unit mission, and as such carries out pre-flight, inflight, and post flight duties.
4. Performs other duties as assigned. D0484

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 07/02/2026 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment.

Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED MEMBERS (E-5 to E-7)

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration. Your resume must contain your own words. Resumes that are verbatim, from this announcement, any PD's, or any other applicants will not be considered.

MINIMUM REQUIREMENTS: Experience or training that has provided the candidate with the skill to remove and replace aircraft parts, accessories, and components, and to make adjustments and settings according to established specifications. Must be skilled in the use of hand tools and test equipment.

SPECIALIZED EXPERIENCE REQUIREMENTS: WG-8852-11: Must haveexperience in the following:

• Experience or training installing, adjusting, aligning, troubleshooting, and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification.
• Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow.
• Ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.
• Experience performing, coordinating, and/or overseeing the work and any periodic inspections to be done on an aircraft whether it is alone, or with the assistance of other mechanics and/or workers.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Knowledge, Skills and Abilities required for this position:

1. Knowledge of how components, systems and assemblies fit, interact, and operate together

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
2. Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

Next steps