Summary
THIS IS A MERIT ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION
UNIT: AASF#2
LOCATION: 2 Vacancies at this location: Saint Cloud, Minnesota
SELECTING OFFICIAL: MSG Donnie Hance (651-282-4547)
ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED
This job is open to
Clarification from the agency
National Guard current employees
Duties
Major Duties: This is not an all-inclusive list
A AIRCRAFT MECHANIC, WG-8852-10/11,
WG10:
(1) Perform inspections, functional checks, and preventive maintenance on assigned aircraft to include pre-inspection, daily inspection, pre- and post-flight inspections and such special inspections as required, including fuel contamination checks, oil sampling, an inspection of onboard emergency equipment. Conducts checks on hydraulic, electrical, transmission, power systems, etc.
(2) Troubleshoots, diagnoses, and performs unscheduled maintenance on assigned and transient aircraft. Performs the full range of repair and testing of aircraft system, assemblies, and surfaces. Using a variety of methods involving test equipment, visual checks and instruments, diagnoses and identifies problem areas and determines the extent of repairs required. Removes components and assemblies, repairs or replaces defective parts and components and reassembles repaired items into the aircraft. Installs, aligns, and makes needed adjustments to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc., assisting Specialists as required. Accomplishes adjustments to related systems which may be affected by repairs. Conducts ground functional tests of all aircraft systems. Services aircraft with oil, de-icing fluid, fuel, and hydraulic fluid. Launches and recovers assigned and transient aircraft; performs inspections prior ot takeoff. Inspects for conditions such as oil, fuel, and hydraulic leak, cut lines, tires and loose panels.
(3) May be required to perform such additional duties as fire fighting, aircraft crash/rescue, snow removal, etc. (4) Perform other duties as assigned.
WG11:
(1) Performs Crew Chief duties with full maintenance responsibility for assigned aircraft. Number of aircraft to be assigned to an incumbent is predetermined by taking into account such factors as the complexity, size, and maintenance requirements of aircraft, the unit mission requirement to have Flight Mechanic or Flight Engineer on board during missions, etc. Diagnoses problems with all aircraft system and components, perform required repairs and accomplishes required preventive maintenance. Serves as a point of contact for assigned aircraft, receiving written and verbal discrepancies from pilots and diagnosing problems. Documents deficiencies, malfunctions, and the repairs required to return aircraft to serviceable condition. Contacts Allied Shops personnel to perform specialist work in such areas as sheet metal, avionics, propeller-rotor, engine, etc., and oversees the work performed. Assigns and directs the work of one or more subordinate air craft mechanic(s) to include less than journeyman level. Accompanies pilot during flights to locate discrepancies that are not evident during ground operation. May perform duties as a crew member (Flight Mechanic or Flight Engineer) during assigned missions on aircraft with that requirement.
(2) Performs the full range of preventive maintenance, repair, and ground testing of aircraft system, assemblies, and surfaces. Using a variety of methods including test equipment, visual checks, and instruments diagnoses and identifies problem areas and determines the extent of repairs required. Removes components and assemblies, repairs or replaces defective parts and components, and reassembles repaired items into the aircraft. Installs, aligns, and makes needed adjusts to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc. Accomplishes adjustments to related systems which may be affected by repairs. Conducts ground functional tests of all aircraft systems. Accomplishes or monitors the performance of periodic inspection, daily inspections, refueliug/defueling of aircraft, and all servicing operations.
(3) Plans and conducts a flight training program for drill status crew chiefs to include maintenance instruction for assigned aircraft, the use of hand and arm signals used, ground handling of aircraft, use of ground equipment, aircraft loading, hoist operations, emergency procedures, etc. Performs duties as a Flight Mechanic/Flight Engineer Bas required to carryout the unit mission, and as such carries out pre-flight, inflight, and post flight duties.
(4) Performs other duties as assigned.
Requirements
Conditions of employment
CONDITIONS OF EMPLOYMENT
- This position is being filled under Merit Promotion procedures and is open to current employees only.
- Minnesota National Guard Membership is required.
- Selectee will be required to wear the military uniform.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Most MNNG position are covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- WG11: Eligible for NSR Non-Aviator Flying Status. must be qualified for Class III flying duties.
- Highly qualified applicants will hold a 15 series Military Occupational Specialty.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
MILITARY COMPATIBILITY:
Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access. Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.
The individual selected must be assigned to a compatible military position and must also maintain satisfactory membership in the Minnesota Army National Guard.
Qualifications
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.
MILITARY GRADES: E-7/SFC and below
Failure to obtain a compatible MOS may result in termination of employment.
GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
Work involves the maintenance, troubleshooting, repair, overhaul, and modification of fixed and rotary wing aircraft systems, airframes, components, and assemblies, where the work requires substantive knowledge of the airframe and aircraft mechanical, pneudraulic, and/or electrical systems and their interrelationships. Some work situations within this series may require varying levels of electronics knowledge.
Minimum Requirements:
WG- Experience or training that has provided the candidate with the skill to remove and replace aircraft parts, accessories, and components, and to make adjustments and settings according to established specifications. Must be skilled in the use of hand tools and test equipment.
WG -10 - Experience or training installing, adjusting, aligning, troubleshooting, and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.
WG-11 and above- In addition to journey-level experience or training equivalent to or exceeding the WG-10, positions at this grade level may include performing duties as a dedicated crew chief. Other positions may include responsibility for performing, coordinating, and/or overseeing the work and any periodic inspections to be done on an aircraft whether it is alone, or with the assistance of other mechanics and/or workers. Some positions may include coordinating the work of other journey-level workers in other trades to work simultaneously on the aircraft. Other positions may include serving as the technical authority to advise on, examine, and approve all airframe, mechanical, electrical, and pneudraulic repairs of assigned aircraft.
Additional Applicable job element factors: Knowledge of Equipment Assembly, Installation, Repair etc., Technical Practices (theoretical, precise, artistic),Use of Measuring Instruments, Ability To Interpret Instructions, Specification, etc. (includes blueprint reading), Ability To Use and Maintain Tools and Equipment, Trouble shooting.
Education
EDUCATION: NA
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
REMARKS: No PCS available. Position will not be filled until current incumbent vacates. Sensitivity Level 2. Participation in direct deposit is mandatory. - Males born after 31 December 1959 must be registered for Selective Service.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
IMPORTANT NOTES:
- Should a position be announced at less than the authorized grade, the selected applicant may be non-competitively promoted when he/she meets all qualifications and is submitted for promotion by the supervisor.
- IAW NGR 600-25 AND AFI 36-101, grade inversion within the full-time workforce is not permitted.
- Males applicants born after 31 December 1959 must be registered with the Selective Service System in compliance with the Defense Authorization Act of 1986, Section 1622 (https://www.sss.gov/RegVer/wfRegistration.aspx).
This is an Excepted Service position that requires active membership in a compatible MOS in the Minnesota Army National Guard and wear of the military uniform. Acceptance of an Excepted Service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently enlisted in the Minnesota Army National Guard must be eligible for immediate enlistment or appointment. For enlistment/appointment criteria, consult www.nationalguard.com. Military skill set is determined by MOS requirements. Upon selection, individuals must be assigned to a compatible military MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS.
The Minnesota Department of Military Affairs is an Equal Opportunity Employer. All qualified applicants will receive consideration for the position without discrimination for any non-merit reason(s) such as age, race, religion, gender, ethnic origin or non-disqualifying disability. Pre-selection is not only counter-productive to effective recruitment and placement, but also violates The Merit Placement Principles and will not be tolerated.
If you have information or questions regarding this issue, please contact the Equal Employment Manager at 651-282-4472 or 651-282-4078.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
AREAS OF PRIORITY: In Accordance with MN National Guard Regulation 690-335 (Army) or 36-1 (Air), Applications will be forwarded to the selection official to conduct reviews by area of priority as listed below
Area 1: Current On-board Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area 2: Current Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired at a sister component that is identified on the Position Vacancy Announcement (PVA), including onboard Title 5 employees that are also current members of MNNG; i.e. Army MNNG to Air MNNG, Air MNNG to Army MNNG.
Evaluation Factors: Candidates will be evaluated on the basis of appropriate education, experience, training, self-development activities, and special awards. Candidates are considered on the basis of available information on their current application and supporting information that has been provided to this office. To ensure full consideration, applicants are urged to submit information about their training, self-development, outside experience, activities and awards. National Guard military (Part-time) service is considered as full-time experience when evaluated against the qualification requirements for a technician position. The applicant is credited with actual number of months the member has been in the National Guard if the experience is related.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you MUST submit a complete Application Package which includes:
1. Resume showing work schedule (Full-time, Part-time, Intermittent), hours worked per week, To and From Dates (format must include Month and Year, e.g, 02/2017, Feb 2017, ect.) of employment and duties performed. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/DD/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.
2. SF50
3. Transcript: If position requires a degree or if using education to qualify
4. The AGO 163 can be submitted to reflect your military experience.
5. The OF 612 is optional but will not be used in lieu of a resume.
Other Required Documents: Additional certifications, transcripts, training reports, and related credentials as applicable
Job Information: Vacancy Identification Number ( 13077992 ), title ( AIRCRAFT MECHANIC ) and Grade(s) ( 10/11 ) for which you are applying for.
Do not include the following types of information in your profile or resume:
- Classified or government sensitive information
- Social Security Number (SSN)
- Photos of yourself
- Personal information, such as age, gender, religious affiliation, etc.
- Encrypted and digitally signed documents
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13077992
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
CONTACTING US: After you have read all the instructions in this vacancy announcement, if you still have questions about this position or the application process, you may contact us at (651) 282-4155.