Qualifications
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for THE WG-6600 ARMAMENT WORK GROUP
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6600 ARMAMENT WORK GROUP. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is to do the job of a AIRCRAFT ORDNANCE SYSTEMS MECHANIC without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Ability to follow oral and written instructions. Ability to operate a computer.
2. Skill in the use of standard hand and power tools of the electronics and electro-mechanical trades.
3. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints, and technical orders relating to the electronics and electro-mechanical trades.
4. Comprehensive knowledge of operation, capabilities, and limitations of complex electronic systems complicated by a variety of multi-component assemblies and devices.
5. Knowledge of related electronic, electrical, mechanical, optical, pneumatic, and hydraulic systems.
6. Ability to remove, install, modify, repair, maintain, test, calibrate, and troubleshoot complete electronic or electromechanical systems. Select and use electronic and electro-mechanical testing equipment. Ability to operate a computer.
OTHER SIGNIFICANT FACTS:
1. This is an Air Reserve Technician (ART) enlisted position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow the incumbent to fully participate in Unit Training Assemblies (UTA) weekends. The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Incumbent may be required to secure a valid state, commercial driver's license with hazardous materials endorsement to perform expediter/dispatch duties.
4. Performs other duties as assigned.
FUNCTIONAL REQUIREMENTS:
Heavy lifting (80 lb. and over). Hours of straight pulling are 2 hours/week. Hours of pulling hand over hand are 1 hour/week. Hours of pushing are 2 hours/week. Reaching above shoulder. Use of fingers. Both hands required. Hours of walking are 2 hours/day. Hours of standing are 4 hours/day. Hours of kneeling are 4 hours/week. Hours of repeated bending are 4 hours/week. Hours of climbing, legs only are 3 hours/week. Climbing, use of legs and arms. Both legs required. Operation of crane, truck, tractor, or motor vehicle. Ability for rapid mental and muscular coordination simultaneously. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Both eyes required. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (aid permitted).
ENVIRONMENTAL FACTORS:
Works inside and out, in inclement weather, on wet slippery, hot/cold ramps, aircraft surfaces and work stands. Subject to the dangers from exposure to toxic fumes, fuel, high pressure air and fluids, electrical shock or burns caused by electrical or RF energy. Dangers also include engine noise, blast, and ingestion, fast actuating metal surfaces such as landing gears, speed brakes, and flaps. Will be required to transport, assemble, load, arm, or safe any assigned munitions, explosive device, or assembly up to and including class 1 explosives. May be subject to the hazards related to the removal or disassembly of explosive devices or subassemblies from explosive laden aircraft.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.