AIRCRAFT ORDNANCE SYSTEMS MECHANIC

Clarification from the agency

Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 within the VTNG. Area II: All Members of the Vermont Air National Guard. Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard.

The primary purpose of this position is to perform on and off equipment maintenance on aircraft egress systems, such as aircraft ejection seats, extraction and escape systems, egress components of jettison canopies, explosive components of escape hatches and doors, and egress trainers.

DUTIES AND RESPONSIBILITIES:

1. Troubleshoots, installs, removes, repairs. modifies, adjusts, inspects, and tests components as regulators, flow indicators, actuator motors, thruster and positioning mechanisms, seat actuators, catapult guide rails, ejection seats, rocket packs, and canopies, etc. Inspects for safety, serviceability, and maintainability of systems prior to installation, removal, repair, or adjustments of components and insures

2. Inspects pressurization system air pressure gauges for sufficient pressure and bottles and regulators for general condition and serviceability. Checks canopy and capsule structure and associated seals, latches, and locks for damage and security. Installs and maintains Jet Assistance Take Off (JATO) systems when applicable. Isolates the malfunction and takes necessary corrective action. Positions, repairs, and adjusts required aerospace ground equipment, such as rail extensions, hoists, slings. dollies, and trailers used in performing maintenance tasks.

3. Performs installation, modification, and repair of aircraft egress systems. Solves unusual installation and maintenance problems by studying layout drawings, schematic and wiring diagrams, applicable technical publications, and analyzing construction and operating characteristics of egress systems. Selects proper maintenance and repair procedures and corrects the malfunction and/or defective equipment. Diagnoses recurring malfunctions and recommends corrective action by initiation of Quality Deficiency Reports, proposed modifications, or other appropriate action. Performs Time Compliance Technical Orders (TCTO'S) related to egress systems.

4. Prepares for and participates in various types of readiness evaluations such as CRI, FRI and UE inspections, mobility, and command support exercises. May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling. heavy equipment operator, maintenance of facilities and equipment. or serve as a member of a team to cope with natural disasters or civil emergencies.


**PERFORMS OTHER DUTIES AS ASSIGNED**

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a Vermont Air National Guard recruiter at (802) 660-8058 prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to consistently use required PPE and safety equipment.
• Must be able to obtain and maintain the appropriate security clearance of the position.

Qualifications

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the Vermont Air National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the Vermont Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a Vermont Air National Guard recruiter at (802) 660-8058 prior to applying for this position.

OPEN AREAS OF CONSIDERATION: AREA 1, 2,3
Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area II: All Members of the Vermont Air National Guard.
Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard.

Military Grade/Rank: will be individually addressed up to TSgt /E-6.

Minimum Requirements: Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications, and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks.

Must have a minimum of two years of experience in a position engaged in functions such as installation, maintenance, or repair of aircrew egress systems.

Must demonstrate through experience and/or appropriate training, a thorough knowledge of mechanical, pneumatic, and electrical principles as applied to aircrew egress systems: of the concepts embodied in AFM 66-1. Vol XII; and of the use and interpretation of blueprints, wiring diagrams. and technical publications.

Specialized Experience: WG-06-9 Months Experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications.

Specialized Experience: WG-08- 12 Months Experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications

Specialized Experience: WG-10 - 18 Months Experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications

Length of time is not of itself qualifying. Candidates' experience should be evaluated based on duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills, and abilities needed to fully perform the duties of the position.

Other conditions of employment & notes:
-This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

-Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

-May occasionally be required to work other than normal duty hours; overtime may be required.

-The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Please be advised:

1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts.

Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

-Knowledge of the Technical Order Distribution System and other technical publications and directives relating to work requirements.

-Knowledge of Equipment Assembly, Installation, Repair etc.

-Knowledge of technical practices.

-Ability To Use and Maintain Tools and Equipment

-Ability To Interpret Instructions, Specifications, etc. (includes blueprints reading)

-Ability to use measuring instruments

-Knowledge and skill in troubleshooting procedures, diagnosing problems and determining corrective action in the aircraft ordnance electronic systems.

-Skill in operating assigned computer systems to document job data and to operate and run test equipment.

Please be advised that the applicant rating will be evaluated on the following occupational competencies:

1. Interpersonal Skills
2. Self-management
3. Integrity/Honesty
4. Technical Competence
5. Teamwork

To apply for this position, you must submit a complete Application Package which includes:

1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume (All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form).

Other supporting documents (as applicable):

• For current Federal employees: Latest SF 50, Personnel Action.
• DD-214
• Transcripts
• Professional Certifications

Helpful Hints for Applying:

- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.

In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.

If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, You must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.

Next steps