Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a AIRCRAFT ORDNANCE SYSTEMS MECHANIC (T32), Position Description Number D1736P01and is part of the AL 187TH Fighter Wing, National Guard.
ORGANIZATION: 187 AMXS, MONTGOMERY, AL
SELECTING OFFICIAL: SMSGT T. EMFINGER
***THIS POSITION MAY BE AUTHORIZED A RECRUITMENT OR RELOCATION INCENTIVE FOR UP TO 25% ALL INCENTIVES MUST BE APPROVED PRIOR TO THE NEW EMPLOYEE IN PROCESSING.***
This job is open to
Clarification from the agency
Title 32
CAT 1- All on board Federal Employees/Technicians within the ALANG (T32 and T5, Permanent and Excepted Indefinite)
CAT 2- Current Air DSG and Temporary Technicians within ALANG
CAT 3- Applicants willing to become NG T32 DS Technicians and gain ALANG membership, all current federal employees, all U.S. Citizens
Duties
(1) Operates, analyzes performance, troubleshoots, inspects, installs, maintains, overhauls, repairs and modifies operational ordnance system(s) and subsystems consisting of numerous complex electronic components in fighter aircraft. Examples of individual subsystems or components are: computerized stores management systems or programmable armament control systems, fire/control avionics, fire control sensing, targeting systems, digital multiplex data bus systems, electronic countermeasures equipment, weapons/avionics video display systems and discrete weapons/avionics systems and ensures compatibility of systems and their interfaces through operational test, system alignment and harmonization.
(2) Removes, repairs, installs, inspects and conducts operational performance checkout of aircraft ordnance and isolates malfunctions and identifies if failures are in specific LRU's, aircraft weapons, avionics multiplex data bus matrix assemblies, or aircraft digital data wiring. Removes faulty units (matrix assemblies) and isolates problems to failing component parts using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital and differential voltmeters, milliohm meters, computer registers, impedance analyzers/multiplex data bus test equipment, and other special and standard tools and test equipment. Removes and replaces components or assemblies down to the smallest bit, piece, or module authorized, using special and common hand tools, special electronic instruments, and soldering devices along with high-reliability soldering techniques.
(3) Loads/unloads, positions and safeties air munitions using applicable technical data and handling equipment. Tests suspension, launch and release systems to ensure proper manual/electrical release on equipment. Analyzes on equipment malfunctions and repairs systems and performs aircraft weapons systems functional checks utilizing system peculiar electronic testing equipment and special tools and tests the aircraft electronic circuitry for normal operation of the ordnance system and absence of stray electrical power.
(4) Ensures all munitions are inventoried at the start and completion of the work shift. Ensures that all munitions expenditures are accurately tracked and recorded on applicable forms. When required will assist the munitions custodian of aircrew training munitions in conducting a weekly munitions inventory and reconciliation.
(5) Coordinates with loading standardization and the weapons element supervisor for all load crew-training requirements and ensures only loading certified/qualified personnel are directed to perform weapons loading tasks and may be required to perform weapons expediting on the flight line.
(6) Maintains and reviews publication files of applicable technical orders, regulations, manuals and local directives. Recommends and rewrites methods to improve maintenance procedures, technical data and equipment and initiates unsatisfactory equipment and technical order deficiency reports.
(7) Provides hands-on training instruction to lower graded personnel concerned with the repair of the electronic ordnance systems within the aircraft. May be required to perform additional duties as a production controller, quality assurance inspector, and bench stock monitor for the work center.
(8) Processes and accounts for due in from maintenance (DIFM) supply assets and ensure materials and equipment are properly stored, protected and maintained and funds are not obligated for material or parts without proper justification.
(9) Adjusts, installs and removes cartridges and squibs for tanks and pylons and chaff/flare systems. Adjusts and installs fusing devices in explosive air munitions. Removes and installs safeing devices on munitions and gun systems and operates Munitions Maintenance Handling Equipment (MMHE) and loading equipment.
(10) Operates fault detection and digital test equipment. Evaluates pilot trouble reports to determine validity and the necessary repair actions. May be required to maintain certification as a weapons load crew chief or load crewmember.
(11) May be required to perform additional duties such as launch/recovery aircraft servicing, fire fighting, crash rescue duty or serve as a member of a team to cope with natural disasters or civil emergencies.
(12) May be required to inspect, troubleshoot, test and maintain the Aerial Gunnery Target System. Analyzes, isolates and repairs off-equipment malfunctions of Aerial Gunnery Target Systems, target sets, digital control displays and associated equipment utilizing digital electronic test equipment and specialized tools. Services and maintains Aerial Gunnery Target System with gaseous nitrogen.
(13) May be delegated authority to clear Red X on aircraft forms.
(14) Performs other duties as assigned.
PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.
Requirements
Conditions of Employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
- May occasionally be required to work other than normal duty hours; overtime may be required.
Qualifications
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.
MINIMUM MILITARY RANK: A1C
MAXIMUM MILITARY RANK: MSGT
*Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications, and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks.
SPECIALIZED EXPERIENCE: Experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications.
Education
SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: SF-50s, transcripts and DD 214s are recommended, but not required.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12506022
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
|