Clarification from the agency

This position is open to current on-board Title 5 and Title 32 employees of the Iowa Army National Guard. Military membership is required.

As a AMMUNITION INSPECTOR, WG-6501-9 your duties are below.

1. Conducts pre-issue inspection of ammunition items prior to issue. Checks each item for restrictions or suspensions. Inspects vehicles, equipment, and storage areas relating to the safety and security of Ammunition and Explosives (A&E). Advises using units on the proper procedures for completion of documentation for issue and turn-in of ammunition and residue. Performs receipt inspections on all ammunition and components turned in by using units. Assists in the inspection and classification of ammunition throughout the state. Provides input regarding causes of ammunition un-serviceability and takes appropriate action when ammunition deterioration is found to be other than "fair wear and tear". Inspects small arms ammunition to ensure segregation of ball and blank ammunition. Supports inspections on all A&E residue returned to the ammunition residue yard. Certifies ammunition residue as explosive free. Initiates documentation for disposition of residue. (25%)
2. Inspects ammunition, performs maintenance, care, preservation, shipping and storage operations, assuring compliance with Standard Operating Procedures (SOPs), safety regulations, drawings, etc. during operations. Conducts visual, mechanical, functional, static or dimensional tests as required. Uses and maintains test equipment including calibration equipment. Sets up and operates specialized Ammunition Peculiar Equipment (APE). Validates material to assure compatibility of explosive items. Spot checks ammunition accountability, and stock accounting procedures. Participates in required quarterly inventories. Conducts causative research by identifying material with lost identifications or found on post through verification inspection. Researches through data bases to identify lots and dates of arrival. Conducts compliance inspections on units at an Ammunition Holding Area (AHA), individual unit field AHAs and at unit locations if required. (25%).
3. Responsible for the requirements of all ammunition management documentation. Researches, analyzes, and completes the proper and required documentation of ammunition transfer records, surveillance records, ammunition condition reports, quality deficiency reports, magazine data cards and numerous other documentation and/or reports. Initiates and maintains inspection reports, publications, and files. Verifies all services' suspension and restriction notices. Records inspection results to the Depot Surveillance Record (DSR) in the Munitions History Program (MHP). Assists in gathering information for the preliminary malfunction report noting all facts pertinent to this malfunction. (25%).
4. Assists in the National Level Ammunition Capability (NLAC) resupply and excess management process as required. Receives shipments of all types of ammunition. Inspects conveyances carrying incoming/outgoing ammunition for damage, proper lot numbers, compatibility of contents, and compliance with directives and regulations. Performs damage-in-transit inspection. Partners with appropriate personnel to ensure route is established and documented; assures the load is compatible and properly blocked and braced for transportation and that all hazardous material manifests, firefighting instructions, vehicle placards, vehicle inspection reports, issue documentation, etc., has been properly prepared. Oversees or participates in preparing items for transport or shipment. (15%)
5. General knowledge of ammunition processes, regulations, and inspection requirements. Develops technical expertise through schooling, technical publications and personal experience of ammunition processes, regulations and inspection requirements. Assists with inspections and audits. Knowledge of basic computer programs. Ability to utilize computer skills in the research of munitions. Acquires a working knowledge of ammunition management systems to include Standard Army Ammunition System-Modernization (SAAS-MOD), Munitions History Program (MHP), Training Ammunition Management Information System (TAMIS) and NLAC. Develops training modules and blocks of instruction to train, re-train and maintain a ready force. Responsible to interpret drawings, prints, schematics, and specifications. (10%)
6. Performs other duties as assigned. D2281000

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 12/24/2025 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment.

Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED (E-5 to E-7)

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration.

MINIMUM REQUIREMENTS: Experience or training which demonstrates the ability to use and maintain tools and equipment associated with the type of work to be done, and to understand and follow oral and written instructions. Experience which demonstrates the knowledge of and the ability to apply safety standards.


SPECIALIZED EXPERIENCE REQUIREMENTS: WG-6501-9: Must haveexperience in the following:

• Experience or training which demonstrates knowledge of various codes of federal regulations (i.e., Department of Transportation and Occupational Safety and Health Association). Ability to respond to unforeseen or emergency situations and be able to make immediate responses to emergency situations, determine the correct course of action to mitigate the problem.
• Experience and knowledge of ammunition/explosives technical references, procedures and policies, materials handling equipment, and lifting gear, rail, and truck characteristics/capabilities.
• Experience and ability to interpret and apply load drawings technical inspections procedures, publications, specifications, and technical drawings pertaining to ammunition/explosives.
• Experience and ability to research, interpret and apply all technical information necessary to inspect each specific ammunition and explosive item, component, and specialized packing material. Ability to read and comprehend technical orders, technical manuals, schematics, blueprints, and drawings, as well as communicate orally and in writing to brief and provide training.
• Experience and knowledge of the safety precautions and procedures necessary to be taken with the variety of ammunition and explosives worked on.
• Experience and knowledge of detonation and burning methods and procedures for the destruction of ammunition and explosives. Knowledge of product specifications, standards, and associated requirements for preservation, packing, shipping, and storage to ensure product quality, safety, and protection of the environment.
• Experience and ability to recognize the various munitions and explosives to apply the proper procedure for inspecting.
• Ability to recognize weather and other conditions that affect explosive operations and to select the alternate procedures necessary under such conditions.
• Knowledge of operating procedures and safety regulations and procedures applicable to firing range activities.
• Skill in the operation of the full variety of machines and tools in operations. Skill in the maintenance and minor repair of machines, tools, and equipment used in ammunition maintenance.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Knowledge, Skills and Abilities required for this position:

1. Knowledge of various codes of federal regulations (Department of Transportation (DOT) and Occupational Safety and Health Association (OSHA).--Ability to respond to unforeseen or emergency situation and be able to make immediate responses to emergency situations, determine the correct course of action to mitigate the problem.
2. Knowledge of ammunition/explosives technical references, procedures and policies, materials handling equipment, and lifting gear, rail and truck characteristics/capabilities.
3. Ability to interpret and apply load drawings technical inspections procedures, publications, specifications and technical drawings pertaining to ammunition/explosives.
4. Ability to research, interpret and apply all technical information necessary to inspect each specific ammunition and explosive item, component and specialized packing material.
5. Ability to read and comprehend technical orders, technical manuals, schematics, blueprints, and drawings, as well as communicate orally and in writing to brief and provide training.--Knowledge of the safety precautions and procedures necessary to be taken with the variety of A&E worked on.
6. Knowledge of detonation and burning methods and procedures for the destruction of A&E.
7. Knowledge of product specifications, standards, and associated requirements for preservation, packing, shipping and storage to ensure product quality, safety, and protection of the environment.
8. Ability to recognize the various munitions and explosives so as to apply the proper procedure for inspecting.
9. Ability to recognize weather and other conditions that affect explosive operations and to select the alternate procedures necessary under such conditions.
10. Knowledge of operating procedures and safety regulations and procedures applicable to firing range activities.
11. Skill in the operation of the full variety of machines and tools in operations.--Skill in the maintenance and minor repair of machines, tools, and equipment used in ammunition maintenance.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
2. Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

Next steps