AMMUNITION INSPECTOR

1. Conducts pre-issue inspection of ammunition items prior to issue. Checks each item for restrictions or suspensions. Inspects vehicles, equipment, and storage areas relating to the safety and security of Ammunition and Explosives (A&E). Advises using units on the proper procedures for completion of documentation for issue and turn-in of ammunition and residue. Performs receipt inspections on all ammunition and components turned in by using units. Assists in the inspection and classification of ammunition throughout the state. Provides input regarding causes of ammunition un-serviceability and takes appropriate action when ammunition deterioration is found to be other than "fair wear and tear". Inspects small arms ammunition to ensure segregation of ball and blank ammunition. Supports inspections on all A&E residue returned to the ammunition residue yard. Certifies ammunition residue as explosive free. Initiates documentation for disposition of residue. Enforces safety regulations and is familiar with information regarding safety considerations. Possesses knowledge of the safe methods of performing different types of ammunition and explosive operations, (demilitarization, renovations, shipping, receiving, testing, inspection and storage). Participates in amnesty management including identifying, inspecting, segregating, determine serviceability, documenting, packaging for storage, and coordinating disposition. Operates forklifts, stake bed trucks, pallet jacks, and various hand tools.

2. Inspects ammunition, performs maintenance, care, preservation, shipping and storage operations, assuring compliance with Standard Operating Procedures (SOPs), safety regulations, drawings, etc. during operations. Conducts visual, mechanical, functional, static or dimensional tests as required. Uses and maintains test equipment including calibration equipment. Sets up and operates specialized Ammunition Peculiar Equipment (APE). Validates material to assure compatibility of explosive items. Spot checks ammunition accountability, and stock accounting procedures. Participates in required quarterly inventories. Conducts causative research by identifying material with lost identifications or found on post through verification inspection. Researches through data bases to identify lots and dates of arrival. Conducts compliance inspections on units at an Ammunition Holding Area (AHA), individual unit field AHAs and at unit locations if required. Monitors ammunition and explosive related operations at firing sites and demilitarization areas for adherence to regulations a procedures concerning explosives, compatibility, quantity distance, explosive and personnel limits, transportation and utilization of protective equipment. Inspects ammunition and components using appropriate Ammunition Surveillance Procedures. Performs Assists inspections of ammunition storage structures to assure safe storage, compatibility, explosive limits, identify structural deterioration and inventory and security practices. Assists Explosives Ordnance Disposal (EOD) team with demilitarization mission. Attests to compliance with environmental policies and guidance. Inspects and/or tests of lightning protection systems. Participates in the physical security program in accordance with current Army Regulation (AR). Conducts and/or coordinates testing of the Intrusion Detection System (IDS).

Performs other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.
• Incumbent must be cleared IAW requirements of AR 190-11 (Physical Security of Arms, Ammunition, and Explosives) and must pass a local and national law enforcement files check.
• Incumbent must meet the requirements of DA PAM 385-64, other applicable regulations, as well as validation by the ammunition and explosives safety certification board.
• Must complete a Training and Certification Program for personnel working in ammunition operations.
• Incumbent must possess and maintain a current state driver’s license.
• Must perform TDY in conjunction with duties.
• Must be able to obtain and maintain a Secret security clearance.
• This position is subject to the Lautenberg amendment to the gun control act of 1968. Therefore, as a condition of employment, selectee will be required to sign a form acknowledging understanding of this provision.
• Must be certified in Hazardous Waste Site Personnel (29 CFR1910.120).
• Physical required.

Qualifications

THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experience. Resumes or applications received in verbatim will not be considered.

In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

The USA Jobs resume builder is recommended to ensure full credit is given for the qualification requirements listed below. YOUR RESUME MUST BE LIMITED TO TWO PAGES, MAXIMUM.

GENERAL EXPERIENCE: Experience or training which demonstrates the ability to use and maintain tools and equipment associated with the type of work to be done, and to understand and follow oral and written instructions. Experience which demonstrates the knowledge of and the ability to apply safety standards.

SPECIALIZED EXPERIENCE: Experience or training which demonstrates knowledge of various codes of federal regulations (i.e., Department of Transportation and Occupational Safety and Health Association). Ability to respond to unforeseen or emergency situations and be able to make immediate responses to emergency situations, determine the correct course of action to mitigate the problem. Knowledge of ammunition/explosives technical references, procedures and policies, materials handling equipment, and lifting gear, rail, and truck characteristics/capabilities. Ability to interpret and apply load drawings technical inspections procedures, publications, specifications, and technical drawings pertaining to ammunition/explosives. Ability to research, interpret and apply all technical information necessary to inspect each specific ammunition and explosive item, component, and specialized packing material. Ability to read and comprehend technical orders, technical manuals, schematics, blueprints, and drawings, as well as communicate orally and in writing to brief and provide training. Knowledge of the safety precautions and procedures necessary to be taken with the variety of ammunition and explosives worked on. Knowledge of detonation and burning methods and procedures for the destruction of ammunition and explosives. Knowledge of product specifications, standards, and associated requirements for preservation, packing, shipping, and storage to ensure product quality, safety, and protection of the environment. Ability to recognize the various munitions and explosives to apply the proper procedure for inspecting. Ability to recognize weather and other conditions that affect explosive operations and to select the alternate procedures necessary under such conditions. Knowledge of operating procedures and safety regulations and procedures applicable to firing range activities. Skill in the operation of the full variety of machines and tools in operations. Skill in the maintenance and minor repair of machines, tools, and equipment used in ammunition maintenance.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing:

• Contact Information-your name and the best way to contact you.
• Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade.
• Education, certifications or licensures.

Next steps