Clarification from the agency

Title 32 CAT 1- All on board Federal Employees/Technicians within the ALANG (T32 and T5, Permanent and Excepted Indefinite) CAT 2- Current Air DSG and Temporary Technicians within ALANG CAT 3- Applicants willing to become NG T32 DS Technicians and gain ALANG membership, all current federal employees, all U.S. Citizens

1. Responsible for the acquisition, construction, maintenance, repair, and operating of real property facilities, and provides related management, engineering, and other support work. Specifically, this includes (a) acquisition, accountability, and disposal of real estate; (b) planning and programming of total requirements for the maintenance, repair, and construction of facilities including financial management of facility programs; (c) provision of basic utility services; (d) maintenance and repair of structures and associated equipment; (e) furnishing snow removal, pest control, fire prevention, and engineering services activities.

2. Exercises authority in planning, directing, controlling and coordinating architectural or engineering activities. Directs total operations through subordinate civilian supervisory and non-supervisory personnel. Plans, schedules and assigns work; establishes and monitors internal controls; and ensures uniform application of regulations, policies, directives, and professional engineering practices.

3. Utilizes program and planning documents in determining real property facility requirements for programmed units and activities within the installation. Accomplishes long and short range planning for replacement of facilities or equipment including contingency operations for potential war or domestic emergency conditions. Oversees development and time phasing of operations and maintenance of real property facility and construction programs to ensure assimilation into the overall installation program.

4. Represents the Base Architect/Engineer at meetings and conferences with HQ ANG and intermediate command staff, Commanders and staff representatives of tenant organizations, Division and District Engineer representatives of the Corps of Engineers and Naval Facilities Engineering Command, metropolitan airports commission staff; FAA, Veterans Administration, highway department representatives; Federal, states, and city Environmental Protection Agency representatives. Coordinates on plans, exchanges information, recommends policy or procedures and keeps apprised of new architecture and engineering developments.

5. Determines operational trends and forecasts requirements. Determines and coordinates acquisition and use of money, manpower, equipment and material. Plans required organizational structures to establish the essential functional elements necessary to carry out architectural/engineering responsibilities most effectively and economically. Delegates authority, ensures coordination, and develops new managerial methods and techniques to increase program effectiveness and decrease costs.

6. Provides technical instructions and information on architectural, engineering and other technical requirements and assigns phases of projects to subordinate architects, engineers, engineering technicians, and draftsmen. Reviews work accomplishment during progress and, upon completion directs changes to achieve technically accurate and adequate layout and design computations, specifications, and estimates. Directs and reviews establishment and maintenance of record drawings, related files, compilation of data for annual budgets and revisions thereto and project capitalization.

7. Establishes technical engineering and architectural processes, criteria, and functions. Prepares or directs the preparation of engineering and architectural drawings, specifications and independent cost estimates for the construction, modification and maintenance of a wide variety of military buildings, structures, pavements, grounds, and utilities systems. Reviews architectural drawings, sketches, and specifications for technical adequacy, constructability, maintainability, operability, and interpretation in terms of requirements for manpower, supplies, and equipment.

8. Through subordinate supervisors, directs approximately twenty-five or more civilian and military employees engaged in readiness, Crash-Fire-Rescue engineering design, explosive ordnance disposal engineering, and operational facility maintenance duties and is responsible for providing training and facilities for the OJT and proficiency training of approximately 100 drill status officers and airmen.

9. Develops and maintains effective engineering staff relationships with base and tenant organizations. In staff meetings and in daily activities, presents briefings on acquisitions, construction, operation, maintenance, and financial management concerning real property facilities. Identifies and discusses problems as well as corrective actions being taken, program status, including fiscal aspects of the engineering portion of the annual budget, and related matters of interest to the Commander and his staff.

- Performs other related duties as assigned.

PLEASE CONTACT HRO FOR COMPLETE POSITION DESCRIPTION.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• May occasionally be required to work other than normal duty hours; overtime may be required.

Qualifications

MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Air National Guard. Applicants who are not currently a member of the Alabama Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Air National Guard recruiter at (800) 864-6264 prior to applying for this position.

MINIMUM MILITARY RANK: 2LT (NEW COMMISSIONING OPPORTUNITY, MUST UPLOAD AFOQT SCORES)
MAXIMUM MILITARY RANK: Maj

EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.

BASIC REQUIREMENTS:
ARCHITECTS:
Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings.

ENGINEERS:
Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

If determining basic qualification requirements on a Combination of education and experience, use the Office of Personnel Management Individual Occupational Requirements Paragraph B and add the following 2 subparagraphs under Paragraph B 2 for this Series.

B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."

B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."

SPECIALIZED EXPERIENCE: Must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.

2. Other supporting documents: SF-50s, transcripts and DD 214s are recommended, but not required.

Next steps