Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for an ARMAMENT EQUIPMENT REPAIR INSPECTOR - TITLE 32, Position Description Number PDD1222000 and is part of the KY MATES, National Guard.
This job is open to
National Guard and reserves
Current members, those who want to join or transitioning military members.
Clarification from the agency
Open to:
AREA 1 - All current federal employees/technicians within Kentucky Army National Guard (T32 and T5, with permanent, conditional or indefinite tenure w/current Kentucky Army National Guard membership)
-AND-
AREA 2 - All current Kentucky Army National Guard members
Duties
As an ARMAMENT EQUIPMENT REPAIR INSPECTOR - TITLE 32, WG-6601-10, you will inspect a variety of armament materiel such as artillery, tank turrets and weapons, small arms, chemical weapons and similar materiel. Use test and diagnostic equipment to determine extent of repairs required and assure that repairs or modifications meet quality assurance standards. Inspect equipment received for maintenance to determine repairs needed and parts required or to determine if Modification Work Orders (MWO) have been applied. Inspect equipment to ensure equipment is operating properly. Inspect equipment to determine repairs needed. Inspect equipment to determine repairs needed. Utilize established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Prepare lists of needed repairs, parts, and man-hours authorized. Perform in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements. Perform final inspection, certifying that equipment is in satisfactory operating condition, or reject the work and return the equipment to the repair shop. Inspect equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serve as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT). Perform other duties as assigned.
A more comprehensive detailed description of the position may be found in Position Description PDD1222000 on file in the employing unit or in the Human Resources Office. Contact the KY HRO Staffing Section via email for additional information, ng.ky.kyarng.mbx.hro-technicianstaffing@army.mil.
Requirements
Conditions of employment
Military Grades: SPC - CSM/SGM
CONDITIONS OF EMPLOYMENT:
You must maintain membership in the Kentucky National Guard.
You must be assigned to a compatible military position.
Wear of the military uniform.
Position may require a pre-employment physical.
May be subject to furlough actions.
May be required to successfully complete a trial period.
Participation in direct deposit is mandatory.
Must obtain and maintain a favorable adjudication of a T3 or equivalent investigation.
Acceptance of a Federal position may terminate a military bonus.
Acceptance of a Federal position will terminate Tricare Reserve Select (TRS) eligibility.
This position is located on a tobacco free facility.
This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
Qualifications
MINIMUM REQUIREMENT:
Experience which demonstrates the knowledge of mechanical, hydraulic, electrical, and pneumatic systems; the ability to recognize improper operation, locate the cause and determine best method of correcting defects; ability to use technical manuals, tools and measuring equipment in making repairs and adjustments.
SPECIALIZED EXPERIENCE:
Must have at least 18 months experience demonstrating a broad knowledge in repairing, rebuilding, modifying and testing mechanical, electrical and hydraulic systems and major components of weapons equipment. Experience in diagnosing malfunctions and determining needed repairs in weapons systems. Experience demonstrating the ability to inspect all weapons systems. Experience interpreting and applying drawings, schematics, blueprints, diagrams and specifications.
EXPERIENCE REQUIREMENTS:
Resume must have complete dates, work schedule, and/or hours worked per week for both civilian and military employment. (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only and unspecified work schedule will result in disqualification. Each applicant must fully substantiate -in their own words- that they meet 100% of the minimum requirements and specialized experience listed above in detail; otherwise, the applicant will be considered unqualified for this position. Do NOT copy and paste from the vacancy announcement or the position description. Also, make sure the applicant's name is on every document submitted, otherwise it will NOT be considered.
Education
This job does not have an education qualification requirement.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (http://www.sss.gov/RegVer/wfRegistration.aspx).
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Ability To Inspect, Ability to Interpret Instructions, Specification, etc. (includes blueprint reading), and Knowledge of Equipment Assembly, Installation, Repair, etc.
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) of employment and duties performed.
2. Other supporting documents: No other documents required.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12898727
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (http://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: http://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.