Requirements
Conditions of employment
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a two year trial period.
- Participation in direct deposit is mandatory.
- For positions requiring the operation of motor vehicles, candidates must have a valid state driver’s license for the state in which they live or are principally employed.
- For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
Qualifications
EDUCATION/GENERAL EXPERIENCE: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."
B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
SPECIALIZED EXPERIENCE: Must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features.
Applicants who meet one of the DoD Priority Placement Program categories below are eligible to apply with this preference. (See Required Documents section) 1. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible 2. Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement 3. Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible" 4. Priority Placement Program, DoD Retained Grade Applicants claiming DoD Retained Grade preference must submit the following documentation: Retained Grade PPP Self Certification Checklist (DD3145-1) SF-50 effecting the placement in retained grade status, and A copy of the notification letter received (RIF or classification downgrade)
Education
Please refer to the Qualification Section for educational requirements.
You must provide a copy of Official Transcripts as documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).
Recruitment/Relocation Incentive: May be authorized for highly qualified candidates or hard to fill positions. TAG is final approval authority for any incentive requests.
Relocation costs are authorized subject to provisions of the Joint Travel Regulation and an agency determination that a Permanent Change of Station (PCS) move is in the Government's best interest.
Superior Qualifications and Special Needs Pay-setting Authority may be considered for this position. TAG is the final approval authority for incentive programs (applicable to newly appointed federal employees or those with a 90-day break in service).
Applicants who meet one of the DoD Priority Placement Program categories below are eligible to apply with this preference. (See Required Documents section) 1. Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible 2. Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement 3. Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible" 4. Priority Placement Program, DoD Retained Grade Applicants claiming DoD Retained Grade preference must submit the following documentation: Retained Grade PPP Self Certification Checklist (DD3145-1) SF-50 effecting the placement in retained grade status, and A copy of the notification letter received (RIF or classification downgrade)
Additional Conditions of Employment:
- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- "This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG."
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):Building & Construction, Civil Engineering, and Construction Management
Required Documents
To apply for this position, you must submit a complete Application Package which includes:
1. Detailed resume to include employer, job title with to and from dates, duties, responsibilities, and experience gained in each position held. Resumes cannot be more than two pages in length. If the resume provided is longer than two pages, it will not move forward in the qualification process. The resume provided must have relevant experience pertaining to the position in which you are applying to. If military or civilian, please include your rank and/or grade.
If your resume does not meet the above requirements, you will automatically be disqualified for the position.
2. Copy of Official Transcripts
3.
Other supporting documents: Current Federal employees: Your most recent Notification of Personnel Action (SF-50 or equivalent), as well as the highest grade (or promotion potential) held, on a permanent basis and containing information which shows you meet time-in-grade (e.g., STEP increase, etc.) No award SF-50 will be accepted.
Former Federal Employees separated from Federal Government over a year ago: Your separation Notification of Personnel Action (SF-50 or equivalent) showing your permanent status and your last Federal performance appraisal plan/rating. You must submit an SF-50(s) that shows permanent career or career conditional tenure to be considered (No award SF-50 will be accepted). Your last Federal performance appraisal plan must reflect a rating of Fully Successful or equivalent.
Applicants claiming Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible must submit the following documentation: 1.Military Reserve and National Guard Technician PPP Self Certification Checklist (DD 3145-3) 2.Termination SF-50 Separation stating that the applicant has Priority Placement Eligibility 3. Notice of Separation confirming of eligibility. Applicants claiming Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement must submit the following documentation: 1.Military Reserve and Technician Disability PPP Self Certification Checklist (DD 3145-2) 2.Termination SF-50 Separation stating that the applicant has Priority Placement Eligibility 3.Notice of Separation confirming of eligibility.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.