Clarification from the agency

Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 within the VTNG. Area II: All Members of the Vermont Air National Guard. Area III: Currently assigned service members in other branches of the military outside of the VTNG, to include those assigned to Active Duty, Reserve or other state's National Guard. Area IV: All individuals able to and willing to become members of the Vermont National Guard.

1. Improves, modifies, fabricates, and designs repairs for low observable assemblies, sub-assemblies, and components ensuring proper weight to strength ratios are met and maintains structural and low observable integrity requirements including associated aircraft structural composites.

2. Performs a variety of extensive evaluations of weapons systems using a variety of complex tools and assessment equipment to assess that the proper radar cross section (RCS) signature according to the associated technical order data, mission requirements and other policy regulations, instructions, and guidance. Inspections will be done on weapons system structure, LO coating, and LO materials.

3. Performs repair, application, and maintenance of corrosion preventatives and paints on aircraft, powered, and non-powered AGE (aerospace ground equipment). Identifies metal corrosion. Performs necessary testing to identify type of corrosion present by examination with magnifying equipment, chemical and mechanical methods. Treats aircraft engines in accordance with applicable technical publications. Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives.

4. Collects, compiles, and records LO systems data for maintenance scheduling, statistical analysis, trending, and historical record. Performs data searches and reports findings as directed. Manages an array of related databases and spreadsheets to capture and catalog data elements for trending, information sharing working groups, and benchmarking. Responsible for documenting, obtaining, applying, securing, and protecting classified records, documents, hardware and software. Analyzes trends in deficiencies, provides engineers and other entities with devised repair procedures, performs prototype repair while providing instructions to other employees.

5. Performs other duties as assigned.

**REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a Vermont Air National Guard recruiter at (802) 660-8054 prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to consistently use required PPE and safety equipment.

Qualifications

SPECIALIZED EXPERIENCE WG-06: specialized experiences in the inspection, repair, modification, removal, installation, troubleshooting, and data documentation of Low Observable (LO) signature systems and structures. The applicant must have the competencies to work LO aircraft designs and structures. Experienced in conducting testing procedures, prevention of metal corrosion, and material failure. Skilled in applying RCS signature reduction techniques and design elements and skilled in the use of various complex tools and equipment. The applicant must have the working knowledge of metal strength characteristics (annealing, tempering, and normalizing); along with composite and LO material characteristics and experienced in selecting proper materials for repair actions. Must have a working knowledge of health hazards associated with maintenance and proper mitigation procedures, such as decontamination and housekeeping. Skilled in assembling and repairing aircraft parts and components using specialized fasteners, classified adhesives and advanced composites. The applicant must have the working knowledge of assigned computer systems such as, IMIS, IMS, ALIS, SAS, and/or LOHAS used for maintenance planning, technical instruction, and maintenance documentation. Competent in identifying proper repair materials using engineering drawings to ensure correct radar band frequency is being mitigated. Skilled in verifying materials that match engineering drawings using reflectometer probes. Experienced and skilled in fabricating repair parts from RAM, cutting tools, and adhering these parts to aircraft surfaces and fasteners using vacuum bags, fixtures, and other pressure inducing processes. Skilled and experienced in applying scrim (gauzelike) materials to RAM and aircraft surfaces in preparation for RAM cover strip installation. Experiences included installing RAM cover strips to panel and skin gaps; applying RAM pastes to aircraft surface gaps, voids, and gouges; sanding and skiving RAM and RAM pastes to required aircraft contours; and repairing LO treatments on polycarbonate transparencies using edge sealing compounds, adhesives, primers, and conductive films.

SPECIALIZED EXPERIENCE WG-08: specialized experiences in the inspection, repair, modification, removal, installation, troubleshooting, and data documentation of Low Observable (LO) signature systems and structures. The applicant must have the competencies to work LO aircraft designs and structures. Experienced in conducting testing procedures, prevention of metal corrosion, and material failure. Skilled in applying RCS signature reduction techniques and design elements and skilled in the use of various complex tools and equipment. The applicant must have the working knowledge of metal strength characteristics (annealing, tempering, and normalizing); along with composite and LO material characteristics and experienced in selecting proper materials for repair actions. Must have a working knowledge of health hazards associated with maintenance and proper mitigation procedures, such as decontamination and housekeeping. Skilled in assembling and repairing aircraft parts and components using specialized fasteners, classified adhesives and advanced composites. The applicant must have the working knowledge of assigned computer systems such as, IMIS, IMS, ALIS, SAS, and/or LOHAS used for maintenance planning, technical instruction, and maintenance documentation. Competent in identifying proper repair materials using engineering drawings to ensure correct radar band frequency is being mitigated. Skilled in verifying materials that match engineering drawings using reflectometer probes. Experienced and skilled in fabricating repair parts from RAM, cutting tools, and adhering these parts to aircraft surfaces and fasteners using vacuum bags, fixtures, and other pressure inducing processes. Skilled and experienced in applying scrim (gauzelike) materials to RAM and aircraft surfaces in preparation for RAM cover strip installation. Experiences included installing RAM cover strips to panel and skin gaps; applying RAM pastes to aircraft surface gaps, voids, and gouges; sanding and skiving RAM and RAM pastes to required aircraft contours; and repairing LO treatments on polycarbonate transparencies using edge sealing compounds, adhesives, primers, and conductive films.

SPECIALIZED EXPERIENCE WG-10: specialized experiences in the inspection, repair, modification, removal, installation, troubleshooting, and data documentation of aircraft Low Observable (LO) signature systems and structures. The applicant must have the competencies to work LO aircraft designs and structures. Experienced in conducting testing procedures, prevention of metal corrosion, and material failure. Skilled in applying RCS signature reduction techniques and design elements and skilled in the use of various complex tools and equipment. The applicant must have the working knowledge of metal strength characteristics (annealing, tempering, and normalizing); along with composite and LO material characteristics and experienced in selecting proper materials for repair actions. Must have a working knowledge of health hazards associated with maintenance and proper mitigation procedures, such as decontamination and housekeeping. Skilled in assembling and repairing aircraft parts and components using specialized fasteners, classified adhesives and advanced composites. The applicant must have the working knowledge of assigned computer systems such as, IMIS, IMS, ALIS, SAS, and/or LOHAS used for maintenance planning, technical instruction, and maintenance documentation. Competent in identifying proper repair materials using engineering drawings to ensure correct radar band frequency is being mitigated. Skilled in verifying materials that match engineering drawings using reflectometer probes. Experienced and skilled in fabricating repair parts from RAM, cutting tools, and adhering these parts to aircraft surfaces and fasteners using vacuum bags, fixtures, and other pressure inducing processes. Skilled and experienced in applying scrim (gauzelike) materials to RAM and aircraft surfaces in preparation for RAM cover strip installation. Experiences included installing RAM cover strips to panel and skin gaps; applying RAM pastes to aircraft surface gaps, voids, and gouges; sanding and skiving RAM and RAM pastes to required aircraft contours; and, repairing LO treatments on polycarbonate transparencies using edge sealing compounds, adhesives, primers, and conductive films.

Please be advised:

1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts.

Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

1. Knowledge of the newest substances to recommend and/or select materials for prototype and one-time items.
2. knowledge of the properties and machining characteristics of a variety of composite or plastic materials.
3. knowledge of the low observable theory and practices with a direct influence to RCS reduction.
4. Knowledge in adapting shop practices, methods, and procedures for use in unorthodox processes to fit new projects.
5. Knowledge in establishing manufacturing procedures for newly developed compound materials by experimenting with various manufacturing techniques, curing times, irregular curvatures (surfaces), temperatures, and pressure.
6. Knowledge in manufacturing master patterns and molds with numerous compound curves and intersecting compound angles.
7. Knowledge in applying mathematics to calculate loads, fits, sizes, and weights not provided in instructions and blueprints to overcome design flaws and lay out more complex items.
8. Knowledge in interactions between like and dislike chemical and other low observable materials to provide a coherent bond line action.

Please be advised that the applicant rating will be evaluated on the following occupational competencies:

1. Aircraft maintenance
2. Oral Communication
3. Integrity/Honesty
4. Self-Management

To apply for this position, you must submit a complete Application Package which includes:

1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words (Do not plagiarize), employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week and salary. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.
2. AGO-VT Form 690-5, Military Experience and Education Resume (All applicants, currently serving in the military, prior-service and civilians MUST complete the name block and military affiliation block of the AGO-VT Form 690-5 and sign and date the form).

Other supporting documents (as applicable):

• For current Federal employees: Latest SF 50, Personnel Action.

Helpful Hints for Applying:

- Ensure that your resume contains your full name, address and phone.
- Include details about the experience that relates to the position you are applying for.
- Be specific and always include Month and Year for the dates of your experience.
- Be sure to include your applicable military experience and explain the duties of the MOS/AFSC held.

In describing your experience, please be clear and specific. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.

If you are using education to qualify for this position or education is a mandatory requirement to meet qualifications, You must submit copies of college transcripts that identify each course, the college or university, semester or quarter hours earned, grade and grade-point received. Submitting a certificate or a degree will not suffice. You must submit transcripts when required. Photocopies are acceptable.

Next steps