Clarification from the agency

This vacancy is open to U.S. Citizens; Interagency Career Transition Assistance Program (ICTAP) and Career Transition Assistance Program (CTAP) eligible in the local commuting area.

Major Duties include, but are not limited to, the following:

• Assists in the investigation of incidents, emergencies, and inspection of complex industries and processes.
• Advises on safety management subjects including process hazard analysis, mechanical integrity, instrumentation, process chemistry, and system safety.
• Reviews established abatement plans and agreements and evaluates the progress of their implementation for compliance with existing schedules for abatement.
• Conducts opening conferences with employers and employee representatives when appropriate to explain the purpose and scope of the inspection or investigation and pertinent PSM Standard regulations.
• Conducts closing conferences with the employer/establishment representative to review hazards and/or violations noted.

As the employee progresses, the assignments will become more difficult and complex with less supervision.

Conditions of employment

• Must be a U.S. Citizen.
• Must be at least 16 years old.
• Requires a probationary period if the requirement has not been met.
• Candidate required to obtain the necessary security/investigation level.
• Requires medical exam and must maintain physical requirements.
• Requires a valid driver's license.
• Subject to a drug test prior to appointment at GS-11 and GS-12 grade levels.
• Requires the use of personal protective equipment (PPE).
• You will be required to lift items weighing up to 25 pounds.

Qualifications

THE ENGINEERING SERIES HAS AN INDIVIDUAL OCCUPATIONAL REQUIREMENT. ALL APPLICANTS MUST MEET THIS REQUIREMENT IN ORDER TO BE CONSIDERED. You must meet the "Individual Occupational Requirement" and the "Specialized Experience" as described below, to qualify for the Chemical Engineer position.

INDIVIDUAL OCCUPATIONAL REQUIREMENT (IOR):
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the Individual Occupational Requirement (IOR), applicants must meet the following specialized experience:
Applicants must have one year of specialized experience, equivalent to the GS-07 in federal service, that equipped the applicant with the particular knowledge, skills, and abilities to perform successfully the duties of the position, and that is typically in or related to the work of the position. Examples of specialized experience include:

• Applying theories, concepts, principles, and methodologies of chemical and/or mechanical engineering combined with fundamental knowledge of the chemical manufacturing industry and petrochemical processes.
• Experience with fluid dynamics, piping and instrumentation (P&I) diagrams, and computer chemical process mapping.
• Presenting data through various venues, such as discussions, meetings, fact sheets, reports, briefings and presentations.

OR

Education: completed a Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as experience with assisting in identifying and evaluating health hazards; surveys, assessing, understanding, and investigating health problems, determining the probable cause, and recommending solutions. (Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation.

Click Application of Veterans Preference for more information.

You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/12958094

If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.

Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.

Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.

Category C - Meets the specialized experience described in the minimum qualification requirements section of this announcement and demonstrates proficiency in the basic competencies.

Clickhere for Evaluation details.

USA Hire

You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

• Attention to Detail
• Flexibility
• Integrity/Honesty
• Interpersonal Skills
• Reasoning
• Teamwork

The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment.

The information you provide may be verified by a review of your paid, unpaid, volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.).

INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) who are Category B or higher will be considered well-qualified. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation.

The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date.

• Resumes: Required and applicants must provide a resume either by creating one in USAJOBS or uploading one from your profile. To receive full consideration for relevant and specialized experience, please list the month, year, and number of work hours worked for the experience listed on your resume. We also suggest that you preview the vacancy questions and confirm that your resume supports your question responses.
• Veterans Documents (if applicable): To be considered as a 5-point (TP) preference eligible, you must submit a copy of your DD214, Certificate of Release or Discharge from Active Duty. Your DD 214 must show the type of discharge and dates of active duty. To claim 10-point (CP/CPS, XP) preference, you must submit a copy of your DD214 and the proof of entitlement of this preference, which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. In addition, a Standard Form (SF-15) should be included, but is not required. (For active-duty service members expecting honorable or general discharge or release within 120 days, click Tentative Preference for Active Duty). For more information, go to Feds Hire Vets - Veterans Preference.
• Displaced Employee Placement Documents: Only required if requesting priority consideration under CTAP or ICTAP eligibility.
• Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PhD, etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit. You may upload your unofficial transcript(s) as one document with a maximum size limit of 5 MB.

NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED if you are selected, and prior to receiving the firm offer with a start date.

Cover Letters are not mandatory and will not be used to verify experience but may be submitted.

Do not upload password-protected documents.

Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.

As a condition of employment for accepting this position, you may be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:

- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Next steps