Summary
Serves as a Civil Engineer and project manager for the Office of Airports (ARP), New York Airports District Office in the Eastern Region, in support of the Airport Improvement Program (AIP). Serves as the principal Federal Aviation Administration (FAA) organization responsible for all airport program matters in airport design, construction, maintenance, operations and safety.
This job is open to
Clarification from the agency
Also open to those eligible for 30% or More Disabled.
Duties
FV-H Duties: Reviews, evaluates and makes recommendations on all aspects of the Airport Improvement Program (AIP) grants-in-aid program regarding the Airports Capital Improvement Plan (ACIP) and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP). Reviews and comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Attends pre-design, preconstruction and construction meetings. Collaborates with senior engineer or supervisor to ensure development projects meet FAA regulations, standards, and guidance. Reviews data from field inspections, status reports, and project closeout reports. Coordinates findings with senior engineer/supervisor to ensure projects meet technical compliance and alignment with requirements. Visits airports and current and proposed construction sites to observe construction progress and perform construction inspections. Provides results to senior engineer or supervisor to ensure acceptable levels of safety are provided. Serves as point of contact with internal FAA stakeholders to coordinate assigned AIP development projects. With support of senior engineer or supervisor, contacts local, state, and federal officials in the coordination, evaluation, and approval of federal grants for airports. FV-I Duties: Reviews and comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Conducts field inspections and reviews status reports/project closeout reports to ensure technical compliance and alignment with project requirements; identifies areas of noncompliance and provides resolution to complex problems/issues. Participates in pre-design, preconstruction and construction meetings to ensure conformance with FAA approved project documents. Ensure development projects meet FAA regulations, standards, and guidance. Develops presentation for conveying technical information. Performs multiple, varying, and complex assignments to ensure timeliness and technical compliance. Defines, plans, and organizes assigned resources to accomplish organizational objective. Visits airports and current and proposed construction sites to observe construction progress and perform construction inspections to ensure acceptable levels of safety are provided. Reviews, evaluates and makes recommendations on all aspects of the AIP, grants-in-aid program regarding the ACIP and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP). Performs other duties as assigned.
Requirements
Conditions of Employment
- US Citizenship is required.
- Selective Service Registration is required for males born after 12/31/1959.
- Successful completion of a security investigation will be required.
Qualifications
To qualify for this position at the FV-H level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-G, FG/GS-5/7/9 levels. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position and that is typically in or related to work of the position to be filled. Examples of specialized experience for this position include: 1) Experience reviewing and commenting on project engineering design drawings and specifications, including construction safety phasing plans. 2) Experience reviewing and commenting on contracts, change orders, and/or supplemental agreements. 3) Experience gathering and analyzing data from a variety of sources and presenting findings via report or formal briefing. To qualify for this position at the FV-I level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-H, FG/GS-11/12 levels. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position and that is typically in or related to work of the position to be filled. Examples of specialized experience for this position include: 1) Experience reviewing and commenting on airport project engineering design drawings and specifications, including construction safety phasing plans. 2) Experience in identifying and resolving complex airport engineering problems/issues. 3) Experience in making recommendations on airport improvements. 4) Experience conveying technical airport engineering information to a variety of audiences. As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA. In lieu of providing a KSA narrative response in the text box listed below each KSA , in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate. Eligible applicants meeting the minimum qualification requirements and selective factor(s) if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration. In addition to the minimum qualifications, the following has been determined to be a selective factor for this position. This means possession of this criterion is part of the minimum qualifications and is essential to perform the duties and responsibilities of this position. Applicants who do not possess this criterion are ineligible for further consideration. - Demonstrated experience in airport design, construction standards and methods.
Education
In addition to meeting the specialized experience above, to qualify for this position you must also meet one of the educational requirements listed below: Basic Requirements for a Civil Engineer, FV-0810: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics; OR, B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
Preview Job Questionnaire
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.
Required Documents
If you want consideration for one or more of the Special Hiring Authorities, documentation that must be submitted at time of application can be found at Direct Hiring Authorities | Federal Aviation Administration (faa.gov). All Veterans: If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions. If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran. Veterans currently on active duty claiming veterans' preference: You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service. Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general. If you are on terminal leave, you must provide documentation certifying authorized terminal leave. If you want consideration for one or more of the Special Hiring Authorities, documentation that must be submitted at time of application can be found at Direct Hiring Authorities | Federal Aviation Administration (faa.gov).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register.
IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.
We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.
Please ensure EACH work history includes ALL of the following information:
- Job Title (include series and grade if Federal Job)
- Duties (be specific in describing your duties)
- Employer's name and address
- Supervisor name and phone number
- Start and end dates including month and year (e.g. June 2007 to April 2008)
- Full-time or part-time status (include hours worked per week)
- Salary
Determining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible.You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies. Please see this guide, Document Upload Guide, for more information on uploading and re-using the documents in your applications.
Next steps
Once we receive your complete application, the Human Resources Office will conduct an evaluation of your qualifications. Eligible and qualified candidates will be referred to the hiring manager for consideration. You will be contacted directly if selected for an interview.
For instructions on how to check the status of your application, please go to: USAJOBS Help Guide.
Important - If you make any changes to your application, you must resubmit it. If you make changes to your application and do not resubmit it, your changes will not be considered part of your application package, and only your previously submitted application will be evaluated.
All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors. DOT provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager. An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis. Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.
|