Civil Engineer/Agricultural Engineer

Clarification from the agency

Applications will be accepted from the public and CTAP/ICTAP/RPL eligible candidates

• Plans, surveys, designs, and oversees construction of engineering projects on farms and rangeland.
• Directs and performs site investigations and feasibility studies; field checks, engineering land surveys, and field construction checks for Conservation Practice installations.
• Plans and conducts pre-bid site showing, approves construction schedules, monitors work for compliance with plans and specifications and contract requirements.
• Interprets plans and specifications for contractors, solving problems at local level as to proper interpretation of specifications.
• Makes periodic quality reviews of notes, drawings, designs, and installations for compliance with policies, procedures, and/or specifications. Keeps Leadership informed at all times of the engineering operations with recommendations for changes.
• Provides technical guidance and training to personnel in all engineering practices, including engineering equipment.
• Coordinates and supervises the planning, design and construction of engineering practices such as water management, animal waste management, erosion control, flood control, wetland creation or restoration, and other conservation practices.
• Assists Leadership in determining training needs of field personnel engaged in engineering work, making recommendations on training needed to assist the organization of the statewide engineering training program.
• Coordinates and conducts construction layout and survey required for practice installation.

Conditions of employment

• You must be a US Citizen or US National.
• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected, you may be sent instructions on obtaining fingerprints. Please note we are unable to reimburse for any fees incurred.
• Probationary and Trial Period – Successful completion of a 1-year probationary period or 2-year trial period unless previous federal service is creditable. Refer to Next Steps for more information.
• Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov.
• Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position.

Qualifications

In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement.

For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards. Your application and resume must clearly show that you possess the experience requirements.

If education is required or being used to qualify, you must submit a copy of your transcripts. This is an interdisciplinary position and may be filled in any of the job series listed below.

Basic Requirement: GS-0810/0890:

Basic Education Requirement:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) http://main.abet.org/aps/accreditedprogramsearch.aspx as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;

OR

B. Combination of Education and Experience--college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure--Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test-Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum-Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provide the applicant has had a least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering.

In addition to meeting the basic requirement, you must also possess experience and/or directly related education listed below.

Specialized Experience Requirement:

For the GS-12 grade level: You Must have one year of specialized experience equivalent to the GS-11 level or higher in the Federal service or comparable experience not gained through Federal service. This experience includes performing the following types of tasks as a regular part of a job: formulation of complex engineering planning, design and construction of conservation practices that address natural resource protection; and/or coordinating and conducting engineering quality assurance checks through site investigations and feasibility studies.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Applications will be evaluated in accordance with Office of Personnel Management's (OPM) Delegated Examining Procedures and USDA policy using category rating. This means you will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. You will be evaluated based on your qualifications for this position as evidenced by the experience, education, and training you described in your application package.

Your application will be reviewed to determine if you meet minimum qualification requirements as described in the qualifications section of the job announcement.

Additionally, the application involves a Technical Assessment. It is the applicant's responsibility to monitor their email for additional information about assessments and any deadlines that may need to be met.

Structured Interview - Competency Responses: A panel of subject matter experts will review your responses during a Structured Interview. These responses to questions/scenarios will be evaluated to provide your rating in the application process. Applicants who meet basic minimum qualifications will be placed in one of three categories: Best Qualified, Well Qualified, or Qualified. Within these categories, applicants eligible for veteran's preference will receive selection priority over non-veterans. Category placement will be determined based on applicants' quality of experience and the extent they possess the following competencies (knowledge, skills, abilities (KSAs), and other characteristics):

• • Civil Engineering
  • Construction Oversight
  • Design
  • Education and Training
  • Quality Assurance

Applicants who meet the minimum qualification requirements and are determined to be among the best qualified candidates based on the technical assessment will be referred to the hiring manager for consideration. Noncompetitive candidates and applicants under some special hiring authorities need only meet minimum qualifications to be referred.

Note: If after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.

Clicking the link below will present a preview of the application form. The application form link below will only provide a preview and does not initiate the application process. To initiate the online application process, click the "Apply" button to the right.

To view the application form, visit: https://apply.usastaffing.gov/ViewQuestionnaire/13002321

The following documents are required for your applicant package to be complete. Encrypted documents will not be accepted. Failure to submit required, legible documents may result in loss of consideration.

• Resume that includes: Personal Information: name, address, contact information; Education; Work Experience related to this position as described in the major duties including work schedule, hours worked per week, dates of employment; title, series, grade (if applicable); other qualifications. Resume cannot exceed 2 pages.
• If education is required or being used to qualify, you must submit a copy of your college transcripts. An unofficial copy is sufficient with the application if it includes your name and the necessary course information; however, if you are selected, official transcripts will be required prior to entering on duty. Education must have been successfully obtained from an accredited school, college or university. If any education was completed at a foreign institute, you must submit with your application evidence that the institute was appropriately accredited by an accrediting body recognized by the U.S. Department of Education as equivalent to U.S. education standards. There are private organizations that specialize in this evaluation and a fee is normally associated with this service. For a list of private organizations that evaluate education, visit the NACES website. All transcripts must be in English or include an English translation.
• If claiming veteran's preference, you must submit a DD214, Certificate of Release from Active Duty, which shows dates of service and discharge under honorable conditions. If currently on active duty you must submit a certification of expected discharge or release from active duty service under honorable conditions not later than 120 days after the date the certification is submitted. Veteran's preference must be verified prior to appointment. Without this documentation, you will not receive veteran's preference and your application will be evaluated based on the material(s) submitted.
• If claiming 10-point veteran's preference you must provide the DD214 or certification requirements (see above bullet), plus the proof of entitlement of this preference as listed on the SF-15 Application for 10-point Veterans' Preference. The SF-15 should be included but is not required. Failure to submit these documents could result in the determination that there is insufficient documentation to support your claim for 10-point preference. For more information on veterans' preference visit FedsHireVets.
• Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), current performance appraisal with rating of at least "Fully Successful" or equivalent, and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.

Next steps