ELECTRONIC INTEGRATED SYSTEMS MECHANIC Job in Moffett Field, CA

Vacancy No. CA-12828249-AF-25-508 Department Air National Guard Units
Salary $44.52 to $51.98 Grade 13 to 13
Perm/Temp Temporary FT/PT Full-time
Open Date 11/14/2025 Close Date 12/5/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Moffett Field, CA


Summary

This ELECTRONIC INTEGRATED SYSTEMS MECHANIC position, is located within an Air National Guard Aviation Wing, Maintenance Group, Aircraft Maintenance Squadron, Avionics Element, Avionics Shop, Communications/Navigation/ECM, or Guidance and Control shopand is part of the CA 129 RQW

This job is open to

National Guard and reserves

Current members, those who want to join or transitioning military members.

Clarification from the agency

Current California National Guard members or employees.

Duties

THIS IS A T32 EXCEPTED SERVICE, INDEFINITE POSITION

Indefinite appointment cannot exceed 5 years.


Selectee may be non-competitively converted to permanent status if/when funding becomes available or position becomes unencumbered.

The primary purpose of the ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13, is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions.

May make additional selections within 90 days of eligible(s) issuance.

Requirements

Conditions of employment

CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://ca.nationalguard.com/california

Compatible Military Assignment and Grade are required. Military technicians must be assigned to a military position in the same unit which they are employed or, in a unit that is supported by the employing activity. Military technicians must hold the military grade specified for the position.

WG-13: 2A071, 2A271, 2A272, 2A273, 2A374, 2A375, 2A871, 2A872, 2A971, 2A972, 2A973Non-PAFSC/DAFSC applicants are encouraged to apply for the positions if experience is held, however must become compatible before appointment.

Priority Areas(s) of Consideration:
Priority consideration is first given to the areas below.

AREA I= Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment.
AREA II= Current California National Guard members.

Military Grades: E-1 through E-6

Recruitment/Relocation
Recruitment/Relocation Incentive IS NOT authorized.

PCS
Relocation Costs IS NOT authorized based on determination that Permanent Change of Station (PCS) move is not in the Government best interest.

Must maintain appropriate level of security clearance.
Must wear appropriate military uniform including required grooming standards.
Must maintain a compatible military unit, grade and job assignment as required by current directives.
Participation in direct deposit is mandatory.

Qualifications

General Experience: Posses experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes; Ability to collect and analyze data effectively, efficiently, and accurately; Able to apply procedures and directives by reading and interpreting material; Ability to communicate clearly and effectively; Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.

ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13: Must have at least 18 months experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops; Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications; Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction; Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications; Broad knowledge of the interactions among a number of closely integrated complex systems; Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc; Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex; Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units; Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.

Your qualifications will be evaluated on the following competencies:

  • Knowledge of Equipment Assembly, Installation, Repair, etc.
  • Technical Documentation
  • Theory of Electronics
  • Trouble shooting (Electronic Equipment)

Education

Military education requirements are mandatory prior to appointment.

Completion of compatible Avionics Air Force Technical Training School required.

Must have been awarded a compatible primary and duty AFSC prior to appointment.

Must have a successful completion of at least one military professional education course program.

Additional information

MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

If you are unable to apply online or need to fax a document you do not have in electronic form, please email ng.ca.caarng.list.j1-hro-recruitfedjobs-usas@army.mil or Fax to 916-854-3439.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing work schedule, hours worked per week, dates (month/year to month/year or present) of employment and duties performed.

2. Other supporting documents: applicable documents required for qualification, education, or certification as stated above.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section above.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. No changes to the application may be made after the close date of the announcement.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

California National Guard HRO
Email
NG.CA.CAARNG.LIST.J1-HRO-RECRUITFEDJOBS-USAS@ARMY.MIL
Address
CA 129 RQW
680 Macon Road
Moffett ANGB, CA 94035
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

If you do not receive an email that your application has been received, make sure the application was correctly submitted.

False Statements - If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or you may be subject to fine, imprisonment, or other disciplinary action.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.