Clarification from the agency

CURRENT Federal Technicians employed by the Mississippi Air National Guard.

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-13, you will inspect, test, troubleshoot, repair and modify software controlled automated and manually controlled test stations, ECM Pods, peripherals, support equipment and associated subsystems. The stations are used to repair and maintain all avionics line-replaceable units (LRUs) and Pods.

1. On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments.

2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives.

3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces.

4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc.

5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained.

6. Performs other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Military Grades: E1-E6

Participation in direct deposit is mandatory.

For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.

CONDITIONS OF EMPLOYMENT & NOTES:

1. Must be able to obtain and maintain the appropriate security clearance of the position.

2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

4. May occasionally be required to work other than normal duty hours; overtime may be required.

5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

6. Wear of the military uniform is MANDATORY.

7. In accordance with Presidential Executive Order 14043, all employees are required to be fully vaccinated prior to their entry on duty (start) date of employment. Fully vaccinated is defined as two (2) weeks following the second dose of Moderna and Comirnaty/Pfizer-BioNTech Vaccines or two (2) weeks following the first (only) dose of the Johnson & Johnson/Janssen Vaccine. If selected for the position, proof of vaccine is required prior to effective date of hire/start date. Proof of vaccine includes a copy of the COVID-19 Vaccination Record Card, medical records documenting the vaccination, immunization records from a public health or state immunization information system, or any other official documentation containing required data points [type of vaccine administered, lot #, date(s) of administration and the name of the health care professional(s) or clinic site(s) administering the vaccine(s)]. This guidance is provided under an emergency use authority.

Qualifications

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.

MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period).

GENERAL EXPERIENCE: To qualify an applicant for one of the FWS Series 2610 ANG Dual Status Technician positions, apply and evaluate the applicant's competencies, military and civilian experiences, completed education, learned skills, obtained knowledge, endorsed abilities,
and training program accomplishments. The following seven basic qualification factors are
applicable to the FWS ANG Dual Status Technician positions:

? Skilled in collecting and analyzing data effectively, efficiently, and accurately
? Ability to communicate clearly and effectively
? Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes
? Ability to format and write English in reports and presentation formats
? Skilled in presenting formal training presentations and briefings
? Skilled in applying procedures and directives by reading and interpreting material
? Skilled in training, mentoring, leading, and problem-solving

SPECIALIZED EXPERIENCE: The applicant must have at least 24 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-13, and must possess the craftsmen knowledge and skills level as required for planning, accomplishing, and maintaining a functional shop maintenance program. Experiences included the ability to plan and complete assigned mechanic shop work. Skilled in completing tasks and works well with others to complete the work. Skilled and knowledgeable of the required and appropriate maintenance procedures to ensure the accurate and efficient completion of work activities. Experienced in estimating manpower, equipment and material requirements involved to finish assigned work or special projects. Experienced in devising and maintaining all program plans and records. Skilled in delivering surveillance and troubleshooting techniques. Capable of independently determining levels of maintenance and necessary repair procedures. Skilled in planning, organizing, and directing shop maintenance programs/procedures. Experienced in determining various approaches, methods, and courses-of-action required to effectively and efficiently accomplish the mission work. Skilled and articulate in providing recommendations to supervisors in regard to personnel actions, such as performance appraisals, awards, position descriptions changes, disciplinary actions, or leave requests. Skilled in implementing environmental safety requirements and identifying equipment handling concerns that resulted in observed safety and housekeeping practices. Experiences included compliance with wearing the appropriate safety equipment and following pertinent safety precautions.

If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager.

NOTES TO CANDIDATES:

a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor.

b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment.

c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social).

d. Final selection will be based upon qualifications, suitability, and available manpower resources.

e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization.

f. Multiple vacancies may be filled from this announcement.

g. If this announcement results in a temporary promotion for the selectee, it may become permanent at any time without further competition dependent on funding and manpower requirements.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

To apply for this position, you must submit a complete Application Package which includes:

1. Resume
Your resume MUST BE IN PDF document format. The resume maybe submitted in any writing format but must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
For qualifications determinations your resume must contain SALARIES, HOURS WORKED PER WEEK, AND THE DATES OF EMPLOYMENT FOR EACH JOB.
Example:
$55,000 per year; 40 hours per week, January 2001-July 2009 or January 2001-present.
If your resume does not contain this information, your application will be marked as incomplete and you will not receive consideration for this position.

2. SF 50
To verify your eligibility, you must submit a copy of your Notification of Personnel Action, Standard Form 50 (SF 50) reflecting your Tenure in Block 24 (1 or 2). Do NOT submit an award SF 50, Tenure Change, or a General Adjustment SF-50 for proof of Time in Grade. Current MSNG applicants can verify your eligibility, by retrieving a copy of your Notification of Personnel Action, Standard Form 50 (SF 50) from MyBiz, https://compo.dcpds.cpms.osd.mil OR eOPF, https://eopf.opm.gov/nationalguard/.

If you are unable to provide the required documents, it is your responsibility to inform the hiring agency before the job closes. Incomplete applications will not be considered.

All documents submitted must be in PDF document format.

Next steps