ELECTRONIC INTEGRATED SYSTEMS MECHANIC (INDEF) (TITLE 32)

Clarification from the agency

This is a Title 32 excepted position. This job announcement may be used to fill additional vacancies for additional positions vacated during the job bid process. Priority will be given to all current, onboard employees of the UTANG. Military membership in the UTANG is required. Applicants must be willing and eligible to immediately enlist in or transfer to the Utah Air National Guard.

Major Duties: This is not an all-inclusive list

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (INDEF) (TITLE 32), WG-2610-12/13, you will:

• Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems.
• Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems.
• Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems.
• Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components.
• Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).
• Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control.
• Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts.
• Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections.
• Analyzes equipment failure and malfunctions and suggests changes to improve operation.
• Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures.
• Assembles, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned.
• Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests.
• Identifies faulty parts and repairs to level authorized.
• Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary.
• Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system.
• Conducts aircrew debriefings to analyze maintenance problems and determines the nature of required modifications.
• Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises.
• Performs other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Military Rank: Enlisted

Compatible Military Assignments: 2A9X4 (Must hold a 7 level in one of the AFSCs to be considered for WG-13)

• Military Membership in the Utah National Guard is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Pending analysis, you may be required to complete a new 1-year probationary period when moved to this position IAW CNGBI 1400.25.
• For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
• Participation in direct deposit is mandatory.
• Medical screening will be completed upon selection for hire.
• Soldiers who accept a technician position may be terminated from the Bonus and Student Loan Repayment Program (SLRP).
• Must be able to obtain and maintain the appropriate security clearance of the position.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; overtime may be required.
• The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• May be eligible to receive incentive pay upon selection.

Qualifications

*Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position.

**Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit.

Minimum Requirements:
Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.

Specialized Experience WG 12:
Must have experience or training demonstrating the ability to repair, align, and adjust major integrated electronic systems such as inertial navigation system, automatic flight control, or fire control system. Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems in order to understand and predict the progressive effects of malfunctions throughout the interrelated units, (e.g., trace an apparent operating error in the hydraulic controls of a gun mount back to the failure of a tactical computer to integrate yaw, pitch, azimuth, and velocity inputs) and to predict areas of technical difficulty in order to assist lower grade employees. Through knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems. Broad knowledge of such applications as radar, digital or analog computers, digital or cathode ray tube display devices, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system. Knowledge of mathematics including algebra and basic trigonometric functions in order to adapt standard formulas to the specific requirements of the integrated system. Ability to follow drawings for integrated electronic systems such as radar navigation systems which integrate terrain information from the radar, pitch, roll, and turn rate, etc. from sensing devices and actuate control relays. Ability to trace the effect of a change in one subsystem to other integrated subsystems and determine which controls and devices must be changed or adjusted to compensate. Ability to diagnose and determine needed repairs for malfunctions in electronics systems such as weapons control where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the deficiency.

Specialized Experience WG13:
Have experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Category Rating: Your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Well Qualified: Candidates in this category possess good skills and experience above the minimum requirements for this position.
3. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.

If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.

IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.

To apply for this position, you must submit a complete Application Package which includes:

1. Resume: Resumes are limited to two-pages, information. Applicants submitting a resume that exceeds the two-page limit will not be eligible for consideration.
For each relevant work experience, make sure you include:

• Job Title and Employer (including series and grade for any Federal positions)
• Start and end dates with month/year (e.g., 05/2019 - 08/2022)
• The number of hours you worked per week

Ensure work experience descriptions are aligned with the job announcement and address all required qualifications. Brief descriptions should demonstrate your ability to perform the tasks at the required level as stated in the job announcement.
When relevant or required for the position, include your possession of education/ certification/license and provide any required documentation such as transcripts, and/or details (type and date) of certifications and/or licenses.

• Education information should include:
  • Name of school/institution
  • Completion date
  • Degree type
  • Cumulative Grade point average (GPA)

When relevant, include:

• Current Security Clearance
• Job-related training
• Language skills
• Organizations and affiliations
• Professional publications
• Eligibility for special programs (e.g., military spouses, individuals with disabilities, etc.)

Helpful Hints for Creating a Two-Page Resume

• Prioritize most relevant and recent experience.
• Use concise, results focused language.
• Align language from the job announcement.
• Focus on demonstrating skills and competencies.
• Remove outdated or unrelated experience

2. Other supporting documents:

• Applicable documents required for qualification, education, or certification as stated above.
• Must provide transcripts for education requirements if applicable.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Next steps