ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32) Job in Portland, OR

Vacancy No. OR-12545685-AF-24-100 Department Air National Guard Units
Salary $40.77 to $49.99 Grade 12 to 13
Perm/Temp Permanent FT/PT Full-time
Open Date 11/18/2024 Close Date 12/18/2024
Job Link Apply Online Who may apply Status Candidates
Locations:
Portland, OR


Summary

This National Guard position is for an ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number D2326000 (WG-12) /D2324000 (WG-13)and is part of the Oregon Air National Guard 142d Wing, National Guard.

This job is open to

Clarification from the agency

Open to all qualified applicants in all Areas of Consideration listed below.

Duties

As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), WG-2610-12/13, this position is located in the Avionics Intermediate Shop (AIS), Component Repair Branch, of an Aircraft Maintenance Squadron. This is an Air National Guard (ANG) Dual Status Technician position requiring military membership, compatible military skill assignment, and classification. Its purpose is to inspect, test, troubleshoot, repair and modify software controlled automated and manually controlled test stations, ECM Pods, peripherals, support equipment and associated subsystems. The stations are used to repair and maintain all avionics line replaceable units (LRUs) and Pods.

1. On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments.

2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives.

3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces.

4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc.

5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises

6. Performs other duties as assigned.

*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.

Requirements

Conditions of Employment

  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Participation in direct deposit is mandatory.
  • U.S. citizenship is required.
  • This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
  • The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
  • Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
  • May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • To qualify and as a condition of continued employment, must possess a valid state drivers license for the state in which he or she lives or is principally employed, in accordance with Air Force and ANG Vehicle Operations Directives.
  • Must be able to obtain/maintain the necessary security clearance for the position.
  • Prior to appointment, an applicant’s military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined in AFI 48-123, Medical Examinations and Standards.
  • As a condition of continued employment, must complete the hazmat certification within six months of employment and complete hazmet recertification every two years.
  • As a condition of continued employment, the employee must maintain the positions mandatory AFSC skill level and continue on-the-job proficiency requirements.
  • As a condition of continued employment, the employee must maintain local network access IAW AFMANs 33-152, User Responsibilities and Guidance for Information Systems and 33-282, Computer Security.
  • Must have a minimum 3-skill level in this Air Force Specialty Code (AFSC): 2A0X1
  • Military Grades: Enlisted members, Minimum rank is SRA/E-4 and maximum rank is TSgt/E-6.
  • Applicants must submit documents that clearly show current military rank, completion of the required technical training, and Primary AFSC such as tech school certificates, Data Brief, vMPF rip, and/or DD214.

Qualifications

Areas of Consideration:
Area 1 - Current permanent or conditional Title 32 Technicians of the Oregon ANG.
Area 2 - Current permanent or conditional Title 5 Employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the Active Duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.

BASIC QUALIFICATION REQUIREMENTS: The following seven basic qualification factors are applicable:
-Skilled in collecting and analyzing data effectively, efficiently, and accurately
-Ability to communicate clearly and effectively
-Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes
-Ability to format and write English in reports and presentation formats
-Skilled in presenting formal training presentations and briefings
-Skilled in applying procedures and directives by reading and interpreting material
-Skilled in training, mentoring, leading, and problem-solving

GENERAL EXPERIENCE QUALIFICATION REQUIREMENTS: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.

WG-2610-12 SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:This position is a journeyman skill level designed as a developmental opportunity to qualify for merit promotion to the dual status technician PD# D2324000, Electronic Integrated Systems Mechanic, WG-2610-13 (Back Shop) craftsman expertise (see below). Must have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences, that involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. NOTE: To credit work experiences gained from completing the compatible AFSC technical training school program, the applicant must submit technical school certificate(s) and student evaluation(s) to support/verify AFSC work experiences and skills performed while attending the applicable Air Force technical school(s).

WG-2610-13 SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level (7-skill level) in one of the compatible AFSCs and have the knowledge and skillsto install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions.

Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time.

Education

To qualify for WG-2610-12: Completion of an Air Force Three Skill Level Technical Training School (for one of the compatible AFSCs) and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level in AFSC.

To qualify for WG-2610-13: Completion of Air Force Seven Skill Level Training and award of a compatible Seven Skill Level PAFSC, along with the successful completion of at least one military professional education (PME) course program.

Applicants MUST submit technical training certificates and/or vMPF rip to show completion of 3-level school and PME.

Additional information

Current AGR members (Oregon ANG only) intending to remain AGR must submit the following:
1) NGB Form 34-1, Application for Active Guard/Reserve (AGR) - Position Announcement number and position title must be annotated on this form.
2) Current Report of Individual Personnel (RIP) - In lieu of a RIP, applicant may provide a printout from the Virtual MPF (VMPF). Documents must show your ASVAB scores.
3) Copy of current physical fitness assessment.

Complete application packet should be in a single PDF format document with the Announcement Number and Last Name ONLY as the file name (example: OR-AF-22-0XX Last name)

Please email completed packages to the personnel listed below. Please include the complete announcement number and last name in the subject line.


If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume will be used to determine if you meet the qualifications listed on this announcement. Your supporting documentation will used to determine eligibility. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.

2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.

Required Documents

In order to qualify for this position you must submit the following:

  1. Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
  2. Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214).
  3. Transcripts, license, or certification that you meet the education requirements if necessary.
The following items may be submitted as supporting documentation:

Cover Letter, DD-214/ Statement of Service, Diploma/ GED, License, OF-306, Police Background Check - DD369, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript


RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Emma Prosser
Phone
(971) 355-3308
Fax
(503) 581-4164
Email
emma.y.prosser.civ@army.mil
Address
Oregon Air National Guard 142d Wing
6801 NE Cornfoot Rd
Portland, OR 97218
US
Learn more about this agency

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.

Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil

Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil

Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2024, exclusive of U. S. government job opportunity announcements