ELECTRONIC MEASUREMENT EQUIP MECH (TITLE 32) Job in Draper, UT

Vacancy No. UT-24-329-AR-12629658 Department Army National Guard Units
Salary $30.02 to $37.11 Grade 10 to 11
Perm/Temp Permanent FT/PT Full-time
Open Date 12/3/2024 Close Date 12/17/2024
Job Link Apply Online Who may apply Public
Locations:
Draper, UT


Summary

This National Guard position is for a ELECTRONIC MEASUREMENT EQUIP MECH (TITLE 32), Position Description Number D1201000 and is part of CSMS located in Draper, with the Utah Army National Guard.

IAW UTNGR 690-12 dated AUG 2022 and LIUNA-UTARNG CBA dated 11 OCT 2022, Priority will be given to all current, onboard employees of the UTARNG.

The selecting supervisor for this vacancy is CW4 Brandon Karren.

This job is open to

Clarification from the agency

This is a Title 32 excepted position. This job announcement may be used to fill additional vacancies for additional positions vacated during the job bid process. IAW UTNGR 690-12 dated AUG 2022 and LIUNA-UTARNG CBA dated 11 OCT 2022, Priority will be given to all current, onboard employees of the UTNG.

Duties

Major Duties: This is not an all-inclusive list

As a ELECTRONIC MEASUREMENT EQUIP MECH (TITLE 32), WG-2602-10/11, you will:

  • Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc.
  • Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements.
  • Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters.
  • Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests.
  • Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern.
  • Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators.
  • Determines purpose in operation characteristics of each major section.
  • Disassembles, cleans and inspects parts such as printed circuit boards, resistors, capacitors, integrated circuits, relays, chambers, cables, and wiring for evidence or wear or malfunction.
  • Tests equipment for sensitivity and correct operation.
  • Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed.
  • Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages.
  • Performs and interprets wipe tests on radiation sources for possibility of radiation hazards.
  • Familiar with and abides by all Federal and State regulations concerning handling, transportation and disposal of radioactive waste or devices.
  • Performs other duties as assigned.

Requirements

Conditions of Employment

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Military Rank: Warrant Officer/Enlisted
  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • May be required to successfully complete a probationary period.
  • For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
  • Must be able to obtain and maintain the appropriate security clearance of the position.
  • This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
  • Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
  • May occasionally be required to work other than normal duty hours; overtime may be required.
  • The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
  • Participation in direct deposit is mandatory.
  • Medical screening will be completed upon selection for hire.
  • Soldiers who accept a technician position may be terminated from the Bonus and Student Loan Repayment Program (SLRP).
  • Potential for Incentive Pay.
  • This position is eligible to be in the union: Laborers International Union of North America (LiUNA) Local 1776.

Qualifications

*Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position.

**Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit.

Minimum Requirements:
Experience or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards.

Specialized Experience:
Have experience with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.

**Selecting supervisor will determine the hiring grade based on current skills**

Education

Not applicable for this position.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Category Rating: Your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are:

1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Well Qualified: Candidates in this category possess good skills and experience above the minimum requirements for this position.
3. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.

If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.

IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Resume: resume must show relevant experience, where you worked, job title, detailed duties and accomplishments written in your own words, employer's name and address, supervisor's name and phone number, starting and ending dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week. If you are a current Federal employee or previous Federal employee, provide your position title, pay plan, series and grade. Your detailed experience should be listed under each job title with starting and ending dates. Resume must show applicants name and contact information.

2. Other supporting documents:

  • Applicable documents required for qualification, education, or certification as stated above.
  • Must provide transcripts for education requirements if applicable.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Shaun Harris
Address
UT CSMS
12953 S Minuteman Dr
Draper, UT 84020
US
Learn more about this agency

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2024, exclusive of U. S. government job opportunity announcements