Requirements
Conditions of employment
- U.S. Citizenship is required
- Males must be registered for Selective Service, see Legal and Regulatory Guidance
- This posn is subject to provisions of the DoD Priority Placement Program
- For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- Employee must maintain current certifications
- This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
- Disclosure of Political Appointments
- Relocation cost or other incentives may be available and considered by the organization.
- All federal employees are required to have direct deposit
- Selectee may be required to serve a probationary or trail period.
- This position may require some flying in government and military aircraft.
- This position, although performed in the general office environment, may require frequent CONUS and/or foreign travel away from the AFTC for periods of up to three weeks or more at a time, depending on the project.
- This position may be subject to TDY by military or commercial aircraft approximately 60 days per year.
Qualifications
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions Group Coverage Qualification Standard for Professional and Scientific Positions
SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower broadband NH-02, equivalent to the next to lower grade GS-11 or equivalent in the Federal Service. Specialized experience includes planning, provisioning, conducting, analyzing and reporting of tests performed using open air ranges, (OAR), installed system test facilities (ISTF), system integration laboratories (SIL) hardware-in-the-loop (HITL) simulations, measurement facilities (MF) and digital modeling and simulation capabilities.
IDEAL CANDIDATE: Desired skills include:
- Experience analyzing flight test data desired.
- Experience as a project lead desired.
- Experience analyzing flight test data desired.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of concepts, principles and techniques across multiple interrelated and integrated technical and test engineering disciplines.
2. Knowledge of combat aircraft, avionics, armament, or electronic warfare systems or related systems/subsystems.
3. Knowledge of flight and laboratory air vehicle/mission test conduct, coordination and supervision, data analysis/evaluation and applicable flight test truth sources, modeling and simulation, technical report preparation, and administrative aspects of flight test programs as well as use modern computer software applications in support of communications and presentations.
4. Ability to plan and organize work, coordinate between various electronic/aerospace/mechanical engineering and test disciplines, and coordinate with other Air Force, DOD, and other domestic and foreign government agencies.
5. Ability to research, analyze, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions.
6. Ability to maintain good working relations, communicate effectively and to provide technical leadership and project management oversight.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
Basic Qualification Requirement: You must meet one of the following qualification requirements by the closing date and provide documentation to support your qualifications (If you are using education to qualify, failure to submit the required documentation will result in you being rated ineligible. See sections on "College Transcripts" and "Foreign Education" below for required documentation.)
A. Degree: Have a Bachelor's Degree in professional engineering from a curriculum (1) in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineer curriculum; or (2) include differential and integral calculus and courses (beyond first-year physics and chemistry) in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Education/Experience: Have a combination of education and experience--college level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences, and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional Registration. Have current registration as a professional engineer
2. Written Test. Have evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelor's Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET
3. Specified Academic Courses. Have successfully completed at least 60 semester or 90 quarter hours of courses in the Physical, Mathematical, and Engineering sciences and in Engineering that included the courses specified in "A" above.
4. Related Curriculum. Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Basic Qualification Supporting Documentation. This position has a specific education requirement. You must submit the appropriate documentation in accordance with the response selected in the assessments:Copy of college transcripts
- If you are a current federal employee in the GS-800 series as an engineer, you may submit your most recent SF-50 in lieu of college transcripts
- Complete college course list*
- Professional engineer license
- Training plan, performance appraisal and/or letter from Professional Engineer Supervisor - Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience. If you are using a related curriculum to qualify, failure to submit the following documentation will result in you being rated ineligible. You must submit a legible copy of your training plan, performance appraisal and/or a letter from your Professional Engineer Supervisor.
Failure to provide the appropriate documentation will result in an ineligible rating.
If selected, you will be required to provide an original/official copy of your documentation before entering on duty.
*Complete list of all college courses must identify: college or university attended, course title/number taken, semester or quarter hours earned, grade and grade-point received. Transcripts must reflect receipt of degree and date degree was awarded, if applicable. To receive credit for foreign education, you must provide proof that the education has been evaluated by an organization specializing in interpretation of foreign educational credentials and has been deemed to be at least equivalent to that gained in conventional U.S. education programs.
Additional information
This public notice is to gather applications that may or may not result in selection.
This job announcement may close at any time - apply now!
This is an acquisition demonstration project position NH-03 equivalent to a GS-12 to GS-13.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
- Online Application: Questionnaire
- Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
- Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214,
Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
Awards for Current Federal Civilian Employees - List any awards received within the last 3 years on the resume.
Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.