Clarification from the agency

1. Washington Army National Guard Permanent or Indefinite Employees. 2. Washington Army National Guard Traditional Guard members and Washington National Guard Active Guard Reserves. 3. All other current military members willing to become Army Washington National Guard members. (Nationwide)

A WG-2604-11, ELECTRONICS MECHANIC:

• Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM). Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.
• Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system. Installs equipment modifications to system per technical work orders.
• Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or salvages defective components. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Interprets complex schematic diagrams. Must exercise a high degree of judgment regarding methods and procedures for completing assignments, which may involve extending the use of conventional tools and equipment and improving changes to techniques, and procedures to reach specified parameters when factors such as temperature extremes, aging of equipment, or modification of circuits have changed operating conditions. Installs and applies equipment modifications when directed.
• Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs. Fabricates items and parts for repair of mechanical and electronic equipment.
• Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
• May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
• Other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Military Grades: E1 - E9, WO1

Desired Military Assignments: 94/25/91/92/12/88/915/948/922

- Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action.

- May be required to successfully complete a trial period.

- Participation in direct deposit is mandatory.

- All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor.

- Males born after 31 December 1959 must be registered for Selective Service.

- Must maintain membership in the WA Army National Guard for continued employment.

- Must be able to obtain and maintain the appropriate security clearance of the position.

- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

- Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

- May occasionally be required to work other than normal duty hours; overtime may be required.

- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Qualifications

GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.

SPECIALIZED EXPERIENCE:
Must have at least 18 months experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. You may also be excluded from consideration if you indicate that you are unwilling to accept the lower grade and a determination is made that you are not qualified at the higher grade. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, and other characteristics). NOTE: You do not have to respond to the KSA's separately but your resume should contain sufficient information to demonstrate possession of the KSA's.

• Comprehensive knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.
• Ability to troubleshoot, install, repair, and maintain complex electronic systems where circuit theory must be used to understand the operation of individual circuits. Skill in developing new test and repair procedures for which none exist, and when possible improving existing procedures.
• Ability to understand the interaction of a number of complex, interrelated circuits to determine the cause of a malfunction and the interaction of various factors.
• Extensive knowledge of electromechanical servo systems, pneumatics, hydraulics, and mechanical and electric motor systems and their effect on each other.
• Skill in interpreting complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the systems from schematic, following signal paths trough a complex path of interconnections of components, assemblies, subassemblies, and connecting cable harnesses.
• Knowledge and skill to modify systems by adding, altering, or removing components in order to standardize or alter the purpose of the equipment or to incorporate new features developed since the equipment was manufactured.

To apply for this position, you are required to submit a complete application package. If you fail to provide this documents/information, you will be marked as having an incomplete application package and will not be considered any further. Resumes must be in your own words. Resumes that are verbatim, from this announcement, will not be considered.

1. Resume must NOT exceed two (2) pages, IAW Merit Hiring Plan and must include:
   • Contact information
     • Full Name
     • Email Address
     • Phone Number
   • Relevant work history that demonstrates specialized experience for the position you are applying to
     • Position Title
     • Organization/Department/Unit
     • Hours worked per week
     • Dates (format should include Month and Year) of employment
     • Duties performed
     • Series and grade for federal positions, if held
   • Resumes exceeding 2 pages will not be considered. For more guidance please see new resume guidance.
   • If your resume includes the below listed content, it will not be used to make an eligibility/qualification determination, and you will not be considered for this vacancy.
     • Classified or government sensitive information
     • Social Security Number (SSN)
     • Photos of yourself
     • Personal information, such as age, gender, religious affiliation, etc.
2. Mil Form 174 Mil Form 174 is required. Applications without the Mil Form 174 will not be considered
   • If you do not have prior military service, please indicate so on the form. (This position requires Military membership in the Washington State Army National Guard).
3. Other support documentation (optional or required based on the vacancy announcement)
   • Cover Letter
   • DD-214
   • SF-50 (latest non-award SF-50)
   • Transcript (s)

***For current Guard/Reserve members, please document your military work experience as follows: (You may adjust the format, so that you do not exceed the two (2) page resume limit, as long as your resume clearly reflects your military employment history.)

List month joined (to/from) based on your enlistment contract (DD4) or (Oath) for Officers. If you have gaps in service, list them separately.

Example:

04 Sep 2019 to 03 Sep 2023
Washington Air National Guard
Traditional Member
20 hours per month
POSITIONS TITLE MOS/AFSC
Personnel Superintendent 3S091
Duties

Military Orders During this period: (list multiple periods if everything else is the same: Order Type, Duties, & Purpose)

04 Nov 2019 to 03 Dec 2019, 40 hours per week
15 Mar 2020 to 14 May 2020, 40 hours per week
Type of Order: ADOS/AT/ST/AGR
Order Purpose:
Duties:

***If there are multiple purposes on a single order (ie. BMT then Tech Training/AIT), list specific periods. Example: Order cover 02 Sep 2020 to 12 Mar 2021:

List 02 Sep 2020 to 01 Nov 2020 as BMT and 02 Nov 2020 to 12 Mar 2021 as Tech Training/AIT


For access to Required Documents please refer to: http://mil.wa.gov/federal-human-resources

Next steps