Clarification from the agency

AREA I: Consideration for this position will be given to all qualified permanent and indefinite Maine Army National Guard Enlisted Technicians currently assigned to the AASF.

This position is located in the Avionics/Electronics function of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Army Aviation Classification Repair Activity Depot (AVCRAD). Its purpose is to perform repair, maintenance, modification, overhaul and installation of complex electronic systems and/or a portion of a complete electronic integrated system involving work on a number of subsystems but not requiring the integration of all operable subsystems into a functional integrated system.

b. DUTIES:

(1) Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include: navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment.

(2) Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft. Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).

(3) Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories,
programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks.

(4) Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records.

(5) When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements.

(6) Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary.

(7) Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.

(8) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations.

(9) Performs other duties as assigned.

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.

Qualifications

Military Grades: Enlisted

GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.

SPECIALIZED EXPERIENCE:
Experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

1. Skill in troubleshooting, inspecting, installing, maintaining, overhauling, repairing, and modifying complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include: navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment.

2. Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in complex electronic systems or individual subsystems of an electronic integrated system.

3. Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work related problems.

4. Ability to work with others.

5. Knowledge of The Army Maintenance Management Systems (TAMMS) and other publications and directives as may be applicable to the function.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing:

• Contact Information-your name and the best way to contact you.
• Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade.
• Education, certifications or licensures.

It is highly suggested that applicants address the General and Specialized Experience required of the position within their resume or on a separate document. All information provided during the application process will be verified. Failure to address all General and Specialized Experience requirements may result in non-selection for an interview.

Next steps