Clarification from the agency

1. Washington Army National Guard Permanent or Indefinite Employees. (Internal)

A WG-2604-11, ELECTRONICS MECHANIC:

• Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include: navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment.
• Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU).
• Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment.
• Solves problems by analyzing installation, circuitry, and operating characteristics of the systems.
• Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components.
• Removes faulty LRUs for shop repair. Installs serviceable components into aircraft.
• Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).
• Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units.
• Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets.
• Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories,programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized.
• Reassembles unit after repair, performs alignment and makes shop checks.
• Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary.
• Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records.
• When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements.
• Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary.
• Processes and accounts for due-in supply assets.
• Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.
• Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys.
• May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies.
• Complies with safety, fire, security, and housekeeping regulations.
• Other duties as assigned.

Conditions of employment

MILITARY REQUIREMENTS:

Military Grades: E3 - E6

Desired Military Assignments: 15/94 series

- Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action.

- May be required to successfully complete a trial period.

- Participation in direct deposit is mandatory.

- All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor.

- Males born after 31 December 1959 must be registered for Selective Service.

- Must maintain membership in the WA Army National Guard for continued employment.

- Must be able to obtain and maintain the appropriate security clearance of the position.

- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

- Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.

- The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

- Must have a valid state driver's license for the state in which they live or are principally employed.

- Must possess or be able to obtain a SECRET clearance within one year of appointment.

Qualifications

GENERAL EXPERIENCE:

Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.

SPECIALIZED EXPERIENCE:
Must have 18 months experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

***Note: If this vacancy announcement indicates Specialized Experience, "1 year equivalent to at least next lower grade level", you must provide your last SF 50, if you are a current or former Federal Employee and you want to be considered under this provision.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. You may also be excluded from consideration if you indicate that you are unwilling to accept the lower grade and a determination is made that you are not qualified at the higher grade. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, and other characteristics). NOTE: You do not have to respond to the KSA's separately but your resume should contain sufficient information to demonstrate possession of the KSA's.

• Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in complex electronic systems or individual subsystems of an electronic integrated system.
• Thorough knowledge of the principles of digital and analog circuits, electro-mechanical devices, solid state devices theory, digital techniques, synchro/servo operation and integrated circuit theory.
• Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE).
• Ability to perform algebraic and trigonometric formulas to solve work related problems.
• Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques.
• Knowledge of The Army Maintenance Management Systems (TAMMS) and other publications and directives as may be applicable to the function.

To apply for this position, you are required to submit a complete application package. If you fail to provide this documents/information, you will be marked as having an incomplete application package and will not be considered any further. Resumes must be in your own words. Resumes that are verbatim, from this announcement, will not be considered.

1. Resume must NOT exceed two (2) pages, IAW Merit Hiring Plan and must include:
   • Contact information
     • Full Name
     • Email Address
     • Phone Number
   • Relevant work history that demonstrates specialized experience for the position you are applying to
     • Position Title
     • Organization/Department/Unit
     • Hours worked per week
     • Dates (format must include Month and Year) of employment
     • Duties performed
     • Series and grade for federal positions, if held
   • Resumes exceeding 2 pages will not be considered. For more guidance please see new resume guidance.
   • If your resume includes the below listed content, it will not be used to make an eligibility/qualification determination, and you will not be considered for this vacancy.
     • Classified or government sensitive information
     • Social Security Number (SSN)
     • Photos of yourself
     • Personal information, such as age, gender, religious affiliation, etc.
2. Mil Form 174 Mil Form 174 is required. Applications without the Mil Form 174 will not be considered
   • If you do not have prior military service, please indicate so on the form. (This position requires Military membership in the Washington State Army National Guard).
3. Other support documentation (optional or required based on the vacancy announcement)
   • Cover Letter
   • DD-214
   • SF-50 (latest non-award SF-50)
   • Transcript (s)

***For current Guard/Reserve members, please document your military work experience as follows: (You may adjust the format, so that you do not exceed the two (2) page resume limit, as long as your resume clearly reflects your military employment history.)

List month joined (to/from) based on your enlistment contract (DD4) or (Oath) for Officers. If you have gaps in service, list them separately.

Example:

04 Sep 2019 to 03 Sep 2023
Washington Air National Guard
Traditional Member
20 hours per month
POSITIONS TITLE MOS/AFSC
Personnel Superintendent 3S091
Duties

Military Orders During this period: (list multiple periods if everything else is the same: Order Type, Duties, & Purpose)

04 Nov 2019 to 03 Dec 2019, 40 hours per week
15 Mar 2020 to 14 May 2020, 40 hours per week
Type of Order: ADOS/AT/ST/AGR
Order Purpose:
Duties:

***If there are multiple purposes on a single order (ie. BMT then Tech Training/AIT), list specific periods. Example: Order cover 02 Sep 2020 to 12 Mar 2021:

List 02 Sep 2020 to 01 Nov 2020 as BMT and 02 Nov 2020 to 12 Mar 2021 as Tech Training/AIT


For access to Required Documents please refer to: http://mil.wa.gov/federal-human-resources

Next steps