Duties
This position is located at Joint Forces Headquarters Combined Support Maintenance in Phoenix, Arizona. The purpose of this position is to serve as a working leader of three or more Electronics Mechanics, WG-2604-11. Performs duties such as field and limited sustainment maintenance and repair of a variety of electronics equipment and complete operational systems. Provides technical guidance and specialized team leadership to lower-grade employees.
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
Requirements
Conditions of employment
- ARIZONA ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED. Prior to appointment into this position, selectee must be a current member of the Arizona Army National Guard, in a military organization supported by the CSMS.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a trial period.
- Participation in direct deposit is mandatory.
- Incumbent must possess and maintain a current unrestricted, excluding glasses, state and military driver’s license.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day
- Must possess and maintain access to the Arizona Army National Guard computer network (NIPR) and required systems.
- Incumbent must possess or be able to maintain the appropriate security clearance of the position.
Qualifications
Military Grades:
Enlisted: SSG/E-6 to SGM/CSM/E-9
Warrant Officer Candidate
Warrant Officer: WO1/W-1 to CW2/W-2
Compatible Military Assignments:
Enlisted: 25 or 94 Series, 13D, 13M, 13P, 13R, 14E, 14T, 14Z, 15E, 17E, 35T, 91A, 91F, 91G, 91H, 91M, 91P, 91S, 91X, or 91Z
Warrant Officer: 25, 29, 91, 94, or 14 Series
SPECIALIZED EXPERIENCE:
Must possess at least 36 experience or training which demonstrates the knowledge of and skill in the repair of electronics equipment sufficient to organize and direct the work of others. Experience which demonstrates an applicant's ability to provide guidance to others in troubleshooting malfunctions. Experience which demonstrates an applicant's ability to instruct others in the use of precision measuring and test equipment. Experience in interpreting technical publications and providing guidance to others.
Education
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
1. Comprehensive knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.
2. Ability to troubleshoot, install, repair, and maintain complex electronic systems where circuit theory must be used to understand the operation of individual circuits. Skill in developing new test and repair procedures for which none exist, and when possible improving existing procedures.
3. Ability to understand the interaction of a number of complex, interrelated circuits to determine the cause of a malfunction and the interaction of various factors.
4. Ability to exercise a high degree of judgment regarding methods and procedures for completing assignments, which may involve extending the use of conventional tools and equipment and improving changes to techniques, and procedures to reach specified parameters when factors such as temperature extremes, aging of equipment, or modification of circuits have changed operating conditions.
5. Skill in interpreting complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the systems from schematic, following signal paths through a complex path of interconnections of components, assemblies, sub-assemblies, and connecting cable harnesses.
6. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
7. Skill and knowledge to provide technical assistance and instruction to lower grade mechanics. Ability to act as quality assurance/control inspector for other mechanics' work.
8. Ability to assign work orders to specific crew members and select workers for various jobs on the basis of knowledge, skills, and abilities. Ability to manage work orders and work flow in order to provide information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems.
Required Documents
To apply for this position, you MUST SUBMIT a complete Application Package which includes:1. Your resume must provide the following information for proper evaluation:
- Name
- Phone Number
- Work experience related to the job for which you are applying; details to include, job title (if federal, include pay plan, series and grade), work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment, employer's name, supervisor's name and contact number, and duties performed. NOTE: Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified.
2. Other supporting documents:
Applicant MUST submit their most current Enlisted Record Brief (ERB), Soldier Talent Profile (STP), or Officer Record Brief (ORB) to verify unit, rank, MOS, and security clearance requirements.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.