Summary
THIS IS AN ARMY NATIONAL GUARD MERIT TITLE 32 EXCEPTED SERVICE POSITION
UNIT: FMS #9
LOCATION: Camp Ripley, Minnesota
SELECTING OFFICIAL: CW3 Jacob Riggs 320-616-3063
ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED
This job is open to
Internal to an agency
Current federal employees of the hiring agency that posted the job announcement.
National Guard and reserves
Current members, those who want to join or transitioning military members.
Clarification from the agency
United States Citizens, National Guard
Duties
Major Duties: This is not an all-inclusive list
A ELECTRONICS MECHANIC (MERIT T32), WG-2604-10,
(1) Performs troubleshooting and routine repairs on individual components and moderately complex systems of launch pod/containers (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assemblies (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems components of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Performs initial and final checks and may perform inspections when required on equipment being repaired.
(2) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, modules, and interconnecting cables of a variety of combat and tactical, and communication equipment. This equipment has moderate or limited complexity to include multi-channel very high frequency (VHF) or ultra high frequency (UHF) transmitters or receivers, power supplies, and multilayered printed circuit boards. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on electronic modules, circuit cards and assemblies, and similar items to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multimeters, and other test equipment to locate, diagnose, and repair malfunctions.
(3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, other moderately complex systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable. Performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or recommends for salvage defective components or assemblies. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Installs and applies equipment modifications when directed.
(4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs.
(5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts. (6) May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
Performs other duties as assigned.
Requirements
Conditions of employment
CONDITIONS OF EMPLOYMENT
- This position is being filled under Merit Promotion procedures and is open to current employees only.
Minnesota National Guard Membership is required.
- Selectee will be required to wear the military uniform.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Must be able to obtain and maintain the appropriate security clearance of the position.
- Most MNNG position are covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
- Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
MILITARY COMPATIBILITY:
Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access. Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility.
The individual selected must be assigned to a compatible military position and must also maintain satisfactory membership in the Minnesota Army National Guard.
Qualifications
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.
MILITARY GRADES: ENLISTED
Failure to obtain a compatible MOS may result in termination of employment.
GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
WG- Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics. WG-09 and above - Experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. Knowledge of Equipment Assembly, Installation, Repair, etc., Use of Test Equipment: Electronics, Ingenuity (Ability To Suggest and Apply New Methods), Theory of Electronics, Ability To Use Hand and Power Tools -Electronics, Trouble shooting (Electronic Equipment).
Education
EDUCATION: N/A
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
Additional information
REMARKS: No PCS available. Position will not be filled until current incumbent vacates. Sensitivity Level 2. Participation in direct deposit is mandatory. - Males born after 31 December 1959 must be registered for Selective Service.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
IMPORTANT NOTES:
- Should a position be announced at less than the authorized grade, the selected applicant may be non-competitively promoted when he/she meets all qualifications and is submitted for promotion by the supervisor.
- IAW NGR 600-25 AND AFI 36-101, grade inversion within the full-time workforce is not permitted.
- Males applicants born after 31 December 1959 must be registered with the Selective Service System in compliance with the Defense Authorization Act of 1986, Section 1622 (https://www.sss.gov/RegVer/wfRegistration.aspx).
This is an Excepted Service position that requires active membership in a compatible MOS in the Minnesota Army National Guard and wear of the military uniform. Acceptance of an Excepted Service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently enlisted in the Minnesota Army National Guard must be eligible for immediate enlistment or appointment. For enlistment/appointment criteria, consult www.nationalguard.com. Military skill set is determined by MOS requirements. Upon selection, individuals must be assigned to a compatible military MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS.
The Minnesota Department of Military Affairs is an Equal Opportunity Employer. All qualified applicants will receive consideration for the position without discrimination for any non-merit reason(s) such as age, race, religion, gender, ethnic origin or non-disqualifying disability. Pre-selection is not only counter-productive to effective recruitment and placement, but also violates The Merit Placement Principles and will not be tolerated.
If you have information or questions regarding this issue, please contact the Equal Employment Manager at 651-282-4472 or 651-282-4078.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
AREAS OF PRIORITY: In Accordance with MN National Guard Regulation 690-335 (Army) or 36-1 (Air), Applications will be forwarded to the selection official to conduct reviews by area of priority as listed below
Area 1: Current On-board Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed.
Area 2: Current Minnesota National Guard Title 32 Technicians who are in permanent or indefinite technician status as a result of being competitively hired at a sister component that is identified on the Position Vacancy Announcement (PVA), including onboard Title 5 employees that are also current members of MNNG; i.e. Army MNNG to Air MNNG, Air MNNG to Army MNNG.
Area 3: All Minnesota National Guard members currently assigned to the MNANG or to the MNARNG applying for a position within the component in which they are currently assigned. i.e. temporary technician or Traditional Guardsman.
Area 4: Currently assigned service members in other branches of the military outside of the Minnesota National Guard, to include those assigned to Active Duty, Reserve or other state's National Guard.
Area 5: All individuals able to and willing to become members of the Minnesota National Guard including prior service not currently assigned to a military component and non-prior service US civilians.
Evaluation Factors: Candidates will be evaluated on the basis of appropriate education, experience, training, self-development activities, and special awards. Candidates are considered on the basis of available information on their current application and supporting information that has been provided to this office. To ensure full consideration, applicants are urged to submit information about their training, self-development, outside experience, activities and awards. National Guard military (Part-time) service is considered as full-time experience when evaluated against the qualification requirements for a technician position. The applicant is credited with actual number of months the member has been in the National Guard if the experience is related.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required Documents
To apply for this position, you MUST submit a complete Application Package which includes:
1. Resume showing work schedule (Full-time, Part-time, Intermittent), hours worked per week, To and From Dates (format must include Month and Year, e.g, 02/2017, Feb 2017, ect.) of employment and duties performed. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/DD/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified, and you will no longer be considered for this position.
2. SF-50: Notification of Personnel Action.
3.Transcript: If position requires a degree or if using education to qualify
4. The AGO 163 can be submitted to reflect your military experience.
5. The OF 612 is optional but will not be used in lieu of a resume.
6. Certificates must be included to support resume.
Other Required Documents: Additional certifications, training, and related credentials
Job Information: Vacancy Identification Number ( 12970933 ), title ( ELECTRONICS MECHANIC (MERIT T32) ) and Grade(s) ( 10 ) for which you are applying for.
Do not include the following types of information in your profile or resume:
- Classified or government sensitive information
- Social Security Number (SSN)
- Photos of yourself
- Personal information, such as age, gender, religious affiliation, etc.
- Encrypted and digitally signed documents
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12970933
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
CONTACTING US: After you have read all the instructions in this vacancy announcement, if you still have questions about this position or the application process, you may contact us at (651) 282-4155.