ELECTRONICS MECHANIC (TITLE 32) Job in San Antonio, TX

Vacancy No. TX-12694269-AR Department Army National Guard Units
Salary $33.30 to $38.85 Grade 11 to 11
Perm/Temp Permanent FT/PT Full-time
Open Date 2/26/2025 Close Date 2/25/2026
Job Link Apply Online Who may apply Status Candidates
Locations:
San Antonio, TX


Summary

This position is within TX SAO, and is located at the San Antonio Army Aviation Support Facility (SAASF) in an Antonio, Texas. Its purpose is to perform repair, maintenance, modification, overhaul and installation of complex electronic systems and/or a portion of a complete electronic integrated system involving work on a number of subsystems but not requiring the integration of all operable subsystems into a functional integrated system.


Texas is one of 9 states with NO state income tax.

This job is open to

Clarification from the agency

CAT 4 - All on-board T32/T5 within the State Aviation Office (SAO), Texas Army National Guard Membership is Required.

Duties

As an ELECTRONICS MECHANIC with the Texas Army National Guard, your duties will include, but will not be limited to:

  • Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components. Examples of equipment worked on include: navigational radios, Doppler or inertial navigation systems, global positioning systems, automatic planning systems, night vision systems, targeting systems, communications radios, flight control and stabilization systems, weapons systems, aircraft survivability equipment, specialized mission equipment and similar electronic and navigational equipment.
  • Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft. Accomplishes technical manual compliance and modification of components and systems. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).
  • Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, power meters, combined Boresight Harmonization Kits, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty part and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks.
  • Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records.
  • When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements.
  • Guides lower level mechanics in performance of tasks. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary.
  • Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.
  • Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural fire fighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations.
  • Performs other duties as assigned.

Requirements

Conditions of Employment

Appointment Factor(s): This is an Excepted Service position that requires active membership in a compatible military assignment in the Texas Army National Guard and wear of the military uniform.

Areas of Consideration: CAT-4, On Board only within TX SAO. This includes:

  • All currently employed T32/T5 full-time permanent, indefinite and temporary personnel of the Texas Army National Guard within the State Aviation Office (SAO), includes Austin/Dallas/Houston/San Antonio Army Aviation Support Facilities (AASFs).
Incentives: Acceptance of a military Federal technician position may result in termination and / or repayment of military incentives. Please check your contract and contact your servicing Education Services (Incentives) office or the Recruiting/Retention office.

Remarks:
  • The Texas National Guard is an Equal Opportunity employer.
  • This is a Non-Bargaining Unit position.
  • Veterans' preference is not applicable to this position.
  • Texas Army National Guard Membership is required.
  • Must be able to obtain and maintain the appropriate security clearance of the position.
  • This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
  • Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
  • Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
  • The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
  • Direct deposit is mandatory.
  • May be required to successfully complete a probationary period.
  • If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
  • This Job announcement will remain open for 1 year or until filled.

Qualifications

To be considered for qualification, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following:

Minimum Requirements:WG - Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.

Specialized Experience Required

To qualify at the WG-11 grade level, your resume must include relevant experience with beginning and ending dates of employment/experience reflecting the following:

Experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

Quality of Experience: Length of time is not of itself qualifying. Candidates' experience should be evaluated on the basis of duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

Military Requirements
This is an excepted service position that requires membership in a military assignment in the Texas Army National Guard. Applicants who are not currently a member of the Texas Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible Military Assignments:
ECMF: 15, 94
EMOS: 14G, 14H, 14T, 14Z, 25B, 25C, 25L, 25N, 25P, 25Q, 25R, 25S, 25T, 25X, 25Z, 91A, 91F, 91G, 91X, 91Z

RANK:
Enlisted: E4/SPC through E6/SSG

Education

There is no educational requirement or allowable substitution for this position.

Additional information

Other Requirements:

For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.

For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.

SKILL AND KNOWLEDGE:
(1) Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in complex electronic systems or individual subsystems of an electronic integrated system.
(2) Thorough knowledge of the principles of digital and analog circuits, electro-mechanical devices, solid state devices theory, digital techniques, synchro/servo operation and integrated circuit theory.
(3) Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work related problems.
(4) Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques.
(5) Knowledge of The Army Maintenance Management Systems (TAMMS) and other publications and directives as may be applicable to the function.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Resume which should include the following for related positions held:

  • Work schedule (ex. Full-time, part-time, intermittent)
  • Hours worked per week
  • To and From dates (ex. MM/YYYY - MM/YYYY)
  • Duties performed - In describing your experience, please be clear and specific. Assumptions will not be made regarding your experience.
2. Copy of your most recent Notification of Personnel Action, Standard Form 50 (SF-50), required.

3. Other supporting documents: N/A

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12694269

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.

To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Human Resources Office
Address
TX SAO
2200 West 35th St
Austin, TX 78703
US

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements