ELECTRONICS MECHANIC (Title 32) Job in Broken Arrow, OK

Vacancy No. OK-12672465-AR-25-002 Department Army National Guard Units
Salary $30.48 to $35.58 Grade 10 to 10
Perm/Temp Permanent FT/PT Full-time
Open Date 1/22/2025 Close Date 3/20/2025
Job Link Apply Online Who may apply Status Candidates
Locations:
Broken Arrow, OK


Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This National Guard position is for a ELECTRONICS MECHANIC (Title 32), Position Description Number D1204000 and is part of the OK FMS 6, Oklahoma Army National Guard.

This job is open to

Clarification from the agency

This position is open to current members of the Oklahoma Army National Guard within the military grades of E-1 through E-8 or WOC through CW2.

Duties

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The primary purpose of this position is to perform field and sustainment maintenance and repair on moderately complex electronics equipment and systems.

DUTIES AND RESPONSIBILITIES:
Performs troubleshooting and routine repairs on individual components and moderately complex systems of launch pod/containers (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assemblies (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems components of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Performs initial and final checks and may perform inspections when required on equipment being repaired.

Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, modules, and interconnecting cables of a variety of combat and tactical, and communication equipment. This equipment has moderate or limited complexity to include multi-channel very high frequency (VHF) or ultra-high frequency (UHF) transmitters or receivers, power supplies, and multilayered printed circuit boards. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on electronic modules, circuit cards and assemblies, and similar items to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.

Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, other moderately complex systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable. Performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or recommends for salvage defective components or assemblies. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Installs and applies equipment modifications when directed.

Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs.

Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.

May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a CommandMaintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance andinstruction to units throughout the state so that they will be able to operate at the desired level of proficiency.

Requirements

Conditions of Employment

  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • Must be able to obtain and maintain the appropriate security clearance of the position.
  • This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
  • Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
  • Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
  • The duties and responsibilities of your job may significantly impact the environment.
  • You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Qualifications

Military Grades: E1 through E8 or WOC through CW2

GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.


SPECIALIZED EXPERIENCE:
Experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.

Knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.

Ability to troubleshoot, install, repair, and maintain electronic components and items, with limited complexity, where circuit theory must be used to understand the operation of individual circuits.

Ability to understand the interaction of complex, interrelated circuits, components, and the interaction of various factors.

Limited knowledge of electromechanical servo systems, pneumatics, hydraulics, and mechanical and electric motor systems and their effect on each other.

Skill in interpreting moderately complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the components, assemblies, subassemblies, and connecting cable harnesses.

Skill in using a wide variety of electronic test equipment such as systems test sets, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators, and the use of special and common hand tools, power tools, and gauges.

Skill in using gunner's quadrants, transits, levels, and theodolites to survey LP/C, M/LPA mounts, and SRP/PDS mounting bolts for exactness. Skill to use recovery-rigging techniques to attach/secure hoists, slings, and lifting devices using authorized equipment to accomplish repairs.

Skill and knowledge to provide technical assistance and instruction.

Education

There is no substitution of education for specialized experience for this position.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).

This position may be eligible for Union Membership.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Technical Competence and Electronics

Required Documents

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume:

  • Your resume may be submitted in any format and must support the specialized experience described in this announcement.
  • If your resume includes a photograph, other PII (Personally Identifiable information) or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy.
  • For qualifications determinations, your resume must contain hours worked per week and the dates of employment (i.e., Hours per week and month/year to month/year or month/year to present ex. 03/2020-06/2022 or 03/2020-Present).
  • If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position.
For additional information see: What to include in your resume.

2. Other supporting documents (as applicable):
  • Certifications
  • DD-214 or NGB 22
  • SF-50
  • Official Transcripts

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12672465

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.


To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Agency contact information

Virginia Salazar
Address
OK FMS 6
8004 E New Orleans Street
Broken Arrow, OK 74014-3689
US
Learn more about this agency

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.


© 2006-2025, exclusive of U. S. government job opportunity announcements