Clarification from the agency

THIS IS OPEN TO AETC EMPLOYEES ONLY

• Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements.
• Determines when equipment malfunctions warrant shutdown of various systems.
• Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work.
• Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

Conditions of employment

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Must be qualified to drive government motor vehicles and qualify for flightline driving qualification.
• Must be able to distinguish colors and shades of colors; Use of both arms and legs is required; requires annual occupational exam and the wear of prescribed aural protection device.
• Indoor and outdoor work at equipment sites requires frequent walking, kneeling, bending, prolonged standing, working in strained and uncomfortable positions, and lifting/carrying moderate (15-44 lbs.).
• Requires CPR certification.
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• Requires recurring training to update knowledge of systems and procedures; requires knowledge of procedures for storage and handling of hazardous materials.
• Potential exists for injuries such as electric shock, cuts and bruises, as well as burns caused by electrical or RF energy and soldering equipment.
• Climbing of towers and ladders while using safety-climbing devices is required ; outdoor work sometimes performed in inclement weather or limited light conditions.
• Subject to shift work, overtime, telephone and pager standby (on-call) and may be required to work an uncommon tour of duty.
• As a condition of employment, the employee must meet certification requirements found in the RAWS Career Field Education and Training Plan (CFETP). (Cont'd)
• The employee is required to maintain proficiency certification on an annual basis, and is subject to validation of training certifications via the Quality Assurance evaluation program.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. (Cont'd)
• Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Technical and Medical Support Positions, Series 0856.

SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-10, or equivalent in other pay systems. Examples of specialized experience includes a comprehensive, intensive and practical knowledge of, and extensive experience and skill in applying a wide range of technical electronics concepts, practices, regulations, policies, and precedents; analytical and diagnostic techniques; and techniques for developing new or modified work methods, approaches, or procedures sufficient to: develop and recommend changes in procedures and technical instructions to management on substantive functions and practices in a high level air traffic location; develop innovative methods, approaches, or procedures to meet emergency situations in an environment where rapid equipment restoration is always paramount to ensure continuous operation where required; and identify, evaluate, and recommend appropriate solutions to resolve complex interrelated problems and issues. NOTE: YOUR RESUME MUST SUPPORT THE RESPONSE YOU SELECT.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-10 level is required to meet the time-in-grade requirements for the GS-11 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Skill and knowledge of wide range of electronic principles and practices Digital Airport Surveillance Radar (DASR-AN/GPN-30); Standard Terminal Automation Replacement System (STARS-AN/FSQ-204); Next Generation Weather Radar System (NEXRAD-WSD-88D); Mono-pulse Secondary Surveillance Radar, (MSSR); FMQ-19 or 23 Weather System; GRC, GRT, GRR, CM-300, URC-200 Radio Systems; FCS-127 ETVS; GSH-74 DALR, Instrument Landing System (ILS), TACAN, associated support equipment, and any systems purchased to replace the aforementioned equipment.

2. Knowledge of a wide range of electronic principles and practices, operating parameters, capabilities, and limitations of electronic systems associated with air traffic control and weather radar equipment; and of systems and component design, capabilities, configurations, limitations, and functional operation; and of various types of electronics logic.

3. Knowledge of safety regulations, procedures, and practices.

4. Skill in the interpretation of technical data such as drawings, schematics, blueprints, and specifications of complete electronic systems; in analyzing problems in integrated/interfacing systems involving numerous complex circuits; and in using complex electronic and electromechanical test and measuring equipment using integrated test functions for different purposes.

5. Ability to modify standard procedures, adapt equipment or techniques, and make departures from previous approaches to solve technical problems or improve system performance for highly complex electronic systems; to trace electronics logic from one system to another; and to establish and maintain effective working relationships to represent the organization in a professional manner.

6. Ability to use computer terminals to enter and extract data to maintain records and document actions. Knowledge of computer operating systems programs, e.g. Unix, Linux, Sun Solaris; network types; network topologies; transport devices e.g. hubs, routers, switches; and data communications equipment.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING:
Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience and education relate to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements
Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.
Basically Qualified Group: Candidates in this category meet the minimum education and/or experience requirements.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

For additional information on what to include in your resume, click here.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Applicants who disqualify themselves will not be evaluated further.

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

1. Online Application: Questionnaire
2. Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
3. Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
4. Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
5. Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
6. Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).

ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:

• Name/Rank/Grade of Service Member
• Branch of Armed Forces
• Dates of Active Service (Start and End Date(s)
• Expected Date of Discharge/Release from Active Duty
• Terminal leave start date (if applicable)
• Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
• Must be certified within 120 days of anticipated discharge
• Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.

Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.

OPTIONAL DOCUMENTS:
Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.
Note: Applicant must not submit award Notification of Personnel Actions (SF50s).

Next steps