Clarification from the agency

Open to U.S. Citizens or Nationals.

As an Electrical Engineer, you will:

• Plan and coordinate feasibility studies for extensive modifications of major segments or component equipment of high-voltage transmission networks to find means of improving performance, increasing capacity, correcting unsatisfactory conditions, or reducing number of stations.
• Determine the nature and extent of problems and the actions needed to resolve conflicting requirements and constraints. Defines the investigation, equipment, engineering tests, and production effort required to accomplish the modification, taking advantage of the latest state-of-the-art equipment.
• Plan, organize, and conduct special studies.
• Perform preliminary engineering analyses.
• Thoroughly evaluate the various alternatives for meeting the objectives of the assignment.
• Develop or adapt approaches and procedures which are followed by less experienced engineers on subsequent assignments of a similar nature.

Conditions of employment

In accordance with Executive Order 14170, applicants are encouraged to respond to four short, free-response, essay questions in the questionnaire. Answer to these questions is not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration

When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically. You must answer all of these questions completely and truthfully.

Key Requirements:

• You must be a United States Citizen.
• This employer participates in the e-Verify program.
• Males must abide by Selective Service registration requirements.
• You will be required to report in person to the official duty location.

• After employment, this position may be subject to periodic physical examinations, as prescribed by competent medical authority and at BPA expense, if exposed to health hazards.

Qualifications

BASIC REQUIREMENT:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR-

B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR-
3. Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-OR-
4. Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

SPECIALIZED EXPERIENCE REQUIREMENTS:

GS-11: You must have one year of specialized experience equivalent to the next lower grade (GS-09): Specialized experience is defined as: Applying electrical engineering theories, concepts, principles, and practices sufficient to participate in engineering studies, analysis, or calculations to solve problems associated with the planning, design, operation, or maintenance of a high-voltage power system.

You may substitute education for specialized experience as follows:

• Three years of progressively higher level graduate education leading to a Ph.D. degree, or Ph.D., or equivalent doctoral degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR-
• Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first two years of full-time study may be credited).

GS-12: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level GS-11 in the Federal service. Specialized experience for this position is defined as: Applying electrical engineering theories, concepts, principles, and practices sufficient to plan or conduct engineering studies, analysis, or calculations to solve problems associated with the planning, design, operation, or maintenance of a high-voltage power system.

There is no substitution of education for experience at the GS-12 grade level.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

You must meet all qualifications and eligibility requirements by the closing date of this announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The Department of Energy uses an application tracking system to evaluate the responses you provide in the applicant assessment questionnaire to place you into an initial quality category via OPM's Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified.

Minimum Qualifications: Once the application process is complete, the Human Resources Offices or Subject Matter Expert (SME) will review your two-page resume and supporting documentation to determine whether you meet the minimum job qualifications.

If your resume is incomplete or does not support the responses you provided in your online questionnaire, or if you fail to submit all required documentation before the vacancy closes, you may be rated 'ineligible', 'not qualified', or your score may be adjusted accordingly

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

• Electrical Engineering
• Oral Communication
• Technical Competence
• Writing

To apply for this position, you MUST provide a complete application package which includes:

• Your two (2) page RESUME showing all relevant work experience (paid and unpaid) including: duties performed; full name and address of each employer; start and end dates (month/day/year); work schedule (part-time, full-time, number of hours if intermittent); salary; and any completed education and training (program title, subject area, number of hours completed, and completion date).
  • Information on how to create a federal resume https://help.usajobs.gov/how-to/account/documents/resume
• Cover Letter, optional, expressing additional information not covered in your resume.
• Transcripts, if specific educational requirements are indicated in this job announcement.Unofficial transcripts or any report listing institution, course title, credits earned (semester or quarter hour) and final grade is acceptable. It is your responsibility to provide adequate proof that you meet the educational requirements.
• Veterans' Preference documentation,if applicable, DD-214 Member Copy 4 showing type of discharge/character of service; current active duty members- certification of expected discharge or release from active duty under honorable conditions dated within 120 days; SF-15 Form and related documentation; VA letter. For more information visit the USAJOBS Help Center & OPM CHCOC website for VOW information.
• Career Transition Assistance Program/Interagency Career Transition Assistance Program documentation, if applicable(e.g., Certification of Expected Separation, Reduction-In-Force Separation Notice, or Notice of Proposed Removal; SF-50 that documents the RIF separation action; and most recent performance appraisal.) For more information see the OPM Guide to Career Transition.

Failure to submit any of the above mentioned required documents may result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all required documents have been submitted.

Next steps