Requirements
Conditions of employment
- U.S. Citizenship is required
- Males must be registered for Selective Service, see Legal and Regulatory Guidance
- This posn is subject to provisions of the DoD Priority Placement Program
- For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
- Relocation costs or other incentives may be available and considered by the organization.
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- Employee must maintain current certifications
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Shift work and emergency overtime may be required
- Disclosure of Political Appointments
- All federal employees are required to have direct deposit.
- This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- May be required to travel by military and/or civilian aircraft in the performance of official duties.
- This is an acquisition coded position. Selectee must complete required certification level 1-Foundational in T-Test and Evaluation within 24 months of assignment.
Qualifications
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional Engineering Positions located here.
INDIVIDUAL OCCUPATIONAL REQUIREMENT: In order to qualify, applicants must meet the education requirement listed in the Education section below. Must submit relevant transcripts!
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-01, equivalent to the next lower grade GS-04 or equivalent in other pay systems. Specialized experience is professional knowledge of electronics engineering policies, theories, principles and concepts, and familiarity with other engineering disciplines to carry out conventional engineering assignments. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.
OR
SUPERIOR ACADEMIC ACHIEVEMENT: Superior academic achievement at the baccalaureate level in an engineering program is qualifying for GS-7. Superior Academic Achievement is based on (1) class standing (Applicants must be in the upper third of the graduating class in the college, university, or major subdivision), (2) grade-point average (Applicants must have a grade-point average of: 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on their official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2years of the curriculum.), or (3) honor society membership (Applicants can be considered eligible based on membership in one of the national scholastic honor societies recognized by the Association of College Honor Societies). NOTE: You must submit a copy of your transcripts.
Ideal Candidate:
- Experience in aircraft instrumentation design, modification, and installation, specifically with F-15/F-16 aircraft is highly preferred.
- Experience leading technical teams.
- Proven ability to manage projects within budget and schedule constraints.
- Strong technical writing and communication skills.
- Ability to brief technical information to diverse audiences, including high-ranking officials.
- Understanding of airworthiness and safety regulations for military air vehicles.
- Ability to work effectively with people from different backgrounds and engineering disciplines.
- Proficiency in AutoCAD Electrical for developing and processing instrumentation design requirements is desired.
- Ability to overcome new challenges which are not always of a technical nature
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Professional knowledge of electronics engineering policies, theories, principles and concepts, and familiarity with other engineering disciplines to carry out conventional engineering assignments.
2. Ability to analyze, interpret and apply electronics engineering rules and procedures in a variety of situations and recommend effective solutions to senior engineers.
3. Ability to communicate effectively both orally and in writing.
4. Knowledge of computer operations and standard software applications.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
ARE YOU USING YOUR EDUCATION TO QUALIFY? If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
BASIC REQUIREMENT:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Additional information
This public notice is to gather applications that may or may not result in selection.
This job announcement may close at any time - apply now!
This is an acquisition demonstration project position NH-02 (equivalent to a GS-05 to GS-11) target NH-03 (equivalent to a GS-12 to GS-13).
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
Your responses to the questionnaire may be compared to the documents you submit. The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.
Applicants who disqualify themselves will not be evaluated further.
APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.
Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
- Online Application: Questionnaire
- Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
- Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214,
Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service/discharge and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.