Duties
Duties & Responsibilities:
(1) Inspects and tests fuel receiving, storage, and distribution facilities and performs preventive maintenance on fuel systems and components. Inspects fuel tanks and vents for proper ventilation. Checks interior and exterior of tanks for corrosion, leakage, contam ination, and sludge and correct operation of roof sumps, roof seals, liquid level gauges, product recovery systems, etc., and inspects gauging equipment for calibration. Performs corrosion control on exposed piping. Performs ground resistance tests and pressure checks system to identify leaks. Checks pumps for unusual noise, vibration, and proper operation. Performs hydrostatic tests on hoses. Tests and calibrates fuel flow meters, and checks manual and diaphragm valves for proper operation. Conducts diagnostic checks on sensors, alarm components, and emergency shutoffs. Inspects tank cleaning equipment such as portable pumps, respirators, air lines, harnesses, hoses, and compressors. Inspects entire fuel distribution system and components to detect possible explosive and toxic hazards and system deficiencies. Conducts follow-up inspections of contractor and in-house repairs. Maintains records of inspections, maintenance, and repairs, as required.
(2) Performs all phases of liquid fuel system and component maintenance including preventive maintenance, troubleshooting, repair, and modification. Removes installs, repairs, and troubleshoots component parts of fuel systems to correct malfunctions of turbine, centrifugal, and rotary pumps, manually operated plug/ball valves, hydraulically operated diaphragm-type valves, pilot control systems, tank gauges and vents, filter separators, fuelflow meters, hydrant outlets, differential pressure gauges, and truck loading and fill connections. Performs modification of systems in accordance with applicable manuals, technical publications, and manufacturer's specifications. Lubricates valves and pumps; replaces gaskets and seals; corrects pumping equipment misalignment; cleans strainers and filters; services filter separators; and checks meters for correct delivery and calibration. Troubleshoots, overhauls, removes, and replaces high/low level controls, liquid level gauges, automatic fueling/defueling valves, pressure regulating valves, water drain valves, excess flow valves, pressure/vacuum vents, and roof seals and sumps. Cleans and purges equipment. Disassembles units and examines component parts for evidence of scratches, wear, cracks, pits, or breaks. Troubleshoots, repairs, and tests equipment installed in vehicle gas stations and truck loading fill stands. Performs liquid calibration of fuel storage tanks and flow meters. Measures, cuts, threads, joins, and fits piping as required to perform system modification or to repair/replace system components.
(3) Troubleshoots and repairs problems in the electrical components of liquid fuel distribution systems. Performs electrical inspection of electro-mechanical components. Uses multi-meter to check system continuity and identify minor system problems. Replaces burned out fuses. Diagnoses, repairs, and adjusts electrical components such as electrical controls, motors, and other devices using electrical measuring equipment (e.g., voltmeters, ammeters, and ohmmeters). Examines motors, diagnoses defects, and makes on-site repairs when possible. Disconnects motors requiring major repair and transports to shop. Uses ohmmeter or megger instrument to test static ground throughout system. Adjusts, aligns, and calibrates gauges and meters to ensure maximum operating efficiency. Installs and performs pressure tests for operation of new, repaired, and modified components, valves, and controls. Performs inspection, maintenance, and repairs on all controls, switches, and connecting and ground cables.
(4) Participates in cleaning the interior surface of bulk storage tanks, above and below ground, by entering tanks. Cleans interior surface and tests seams and other areas suspected of leakage. Performs corrosion control by removing corrosion and repainting surfaces. Removes and disposes of sludge. Follows safety precautions in tank entry, ventilation tasks, and in disposing of sludge.
(5) Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment (i.e., foot, eye, breathing, and ear protective gear) and clothing (i.e., cotton). Polices grounds, buildings, and pits to maintain area in accordance with fire prevention and security directives.
(6) Performs other as duties as assigned.
Requirements
Conditions of employment
1) National Guard Membership is required.
2) Males born after 31 December 1959 must be registered for Selective Service.
3) Federal employment suitability as determined by a background investigation.
4) May be required to successfully complete a probationary period.
MILITARY REQUIREMENTS: ENLISTED
SECURITY CLEARANCE: Must maintain appropriate level of security clearance.
***LOUISIANA NATIONAL GUARD MEMBERS - Acceptance of this position may result in the loss of contracted incentive(s). For further details, contact the LANG State Incentive Manager, at (504) 278-8116 (ARMY) 391-8336 (AIR FORCE). ***
NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRED ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
Participation in direct deposit is mandatory.
Qualifications
GENERAL EXPERIENCE: Must possess experience or training demonstrating knowledge of hydraulics, fluids, gases and mechanics as applied to fuel systems and components repair techniques; experience using tools and equipment associated with the trade and reading and interpreting directions.
SPECIALIZED EXPERIENCE: Must possess experience or training operating, maintaining, repairing, troubleshooting, and overhauling fuel systems and components; experience or training initiating and controlling the movement and storage of fuel supplies by operating high pressure systems with a series of terminals connected by cross-country pipelines or multi-fuel storage and distribution facilities connected by a network of internal pipelines.
CONDITIONS OF EMPLOYMENT:
1. Must be able to obtain and maintain the appropriate security clearance of the position.
2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
*4. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Education
You must provide transcripts and/or other documentation as proof to support your Educational claims, and receive credit to meet the Education requirements for this position.
Additional information
As a condition of employment for accepting this position, you will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider:
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
Payment of Permanent Change of Station (PCS) costs is not authorized, based upon a determination that a PCS move is not in the Government interest.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Ability to Use and Maintain Tools and Equipment, Knowledge of Equipment, Structure, Materials, etc. (Includes Constructing, Repair, and Forging), and Troubleshooting