Duties
Organizes, administers and evaluates a segment of the fuels quality assurance program for the organization. Ensures responsibilities for product compliance inspections of all petroleum activities. Draws fuel samples for frequencies and exact testing following procedures listed in appropriate technical orders. Determines status and adequacy of actions taken on prior inspection items and prepares accurate reports for management use. Conducts statistical surveys of petroleum products in areas where trouble had been encountered. Analyzes defect data, isolates trends and recommends corrective action. Investigates problem areas, identifies causes, recommends and takes corrective follow-up action. Verifies quality through the application of audit and investigative methods to ensure compliance with established guidelines. Advises responsible supervisors on quality problems and required corrective action. Provides technical assistance to personnel in assigned organization in order to improve quality and enhance safety of equipment and workers using products. Prepares local operating procedures based on supplements, regulations, and manuals of higher echelons in the area of quality assurance. Assists in managing fiscal resources for support of the quality assurance program. Conducts laboratory analysis to determine that physical and chemical properties of products are within specification use limits. Operates precision measuring instruments and analytical equipment designed to measure the effectiveness of mechanical systems and petroleum handling hardware. Tests various petroleum, cryogenic samples for total solids and microscopic analysis. Extracts samples from selected source throughout the base and submits to area laboratory for pollution control and correlation testing. Samples are recorded in the Air Force Test and Analysis Tool (AFTAT). Uses technical publications, bulleting, specifications and standards. Must conduct surveillance inspections during operations of components in pump house and tank farms during receipt, transfer, sampling and issue of petroleum products. Recommends objectives and acts as an advisor on well defined, non-controversial fuels projects to ensure continuous refinement of the quality program in response to test results, processing problems or objective quality evidence. Responsible for maintaining the Quality Control module in the Fuels Automated System Fuels Manager Defense (FMD) database. Documents all sampling, sample due dates and the status of all equipment in the FMD. Builds and maintains test sets in the Quality Control Module of FMD.
Directs, inspects, operates and maintains a complete fuels distribution system(s) to receive, store, transfer and issue both aviation and ground fuels. Operates petroleum products distribution equipment by initiating and controlling the movement and storage of supplies throughout complete pipeline or tank farm systems, using telephone communications, signal systems, a central control board, or similar facilities. Inspects systems for leakage, corrosion, faulty fittings, and inoperative components such as distribution lines, storage tanks, hydrant pits/outlets, oil/water separator, pumps, automatic/manual valves, meters, and system control rooms. Performs operator maintenance to include checking components for operation, adjustment, pressures, and external leakage under pressure, removing/cleaning/inspecting receipt and dispensing strainers, calibrating additive injectors, draining water from lines, tanks, filter separator vessels and dike/containment areas. Reports more extensive repairs/needs. Receives and transfers fuel by coupling and uncoupling hoses, closing and opening valves, starting and stopping pumps, monitoring gauges, meters and filter separators. Maintains hazardous waste management program, to include initial accumulation points maintenance & inspections. Conducts all additional required environmental inspections. Directs and coordinates disposal with Base Environmental Manger. Transports fuel from the bulk storage area to the flightline issue point, positions the vehicle for the refueling/defueling task as required. Monitors vehicle mounted main control panel, gauges, meters and instruments. Operates deadman control safety system and coordinates with personnel at the aircraft or receiving point. Exercises safety precautions during fueling/defueling operations. Inspects and performs operator maintenance and safety checks to ensure that refueling equipment is safe and operational. Modifies all sales transactions to reflect fuel at 60 degrees using volume correction factor per DLA policy regarding capitalized fuel.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Technical Competence
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12758117
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.