Clarification from the agency

Open to all U.S. Citizens. This position will be filled through Direct Hire Authority (DHA). All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for further consideration. The "Rule of Three", Category Rating, Veterans Preference, and traditional rating and ranking of applicants does not apply to this vacancy.

You will serve as a Project Manager/General Engineer and be responsible for projects within a multi-disciplinary architectural and engineering team. Projects include new construction of CG facilities or repair, maintenance, modification or renovation of existing facilities. CG facilities include modern and historic buildings, waterfronts, airfields, hangars, aids-to-navigation facilities, communication facilities, single and multi-family housing, industrial buildings, multi-mission buildings, support structures and all associated utilities. Serves as the project point of contact for customers, activity, command, and contracting teams. Serves as a general engineer with an emphasis on structural components and factors for independent technical reviews, project scoping, field investigation, planning, cost estimating, problem and conflict resolution, scheduling, design production and construction. Projects and customers are located throughout the Alaska Area requiring multiple days of travel to the remote units.

Being a Coast Guard civilian makes you a valuable member of the Coast Guard team. Typical work assignments include:

• Planning specific objectives, milestones, and phases for complex projects, and makes needed innovations and modifications. Provides detailed technical decisions regarding scope, intent and extent of the work.
• Conceiving, analyzing, designing, planning, and executing large and/or complex designs for diverse range of engineering projects.
• Evaluating design objectives, performing complex technical calculations, and identifying the most economical and efficient procedures for project design and performance considering all influences.
• Preparing drawings, specifications and cost estimates including computer aided drawing for both design and drafting.
• Guiding and evaluating Architectural/Engineering (AE) contractor efforts and assesses technical and project progress.
• Participating on a multi-disciplinary team performing Facility Condition Assessment inspections at CG facilities.

Conditions of employment

All qualification requirements must be met by the closing date of the announcement.

Do NOT include the following types of information in your resume:

• Social Security Number (SSN)
• Date of Birth (DOB)
• Photos of yourself (if included on your resume you will not be considered for this position)
• Personal information: such as age, gender, religious affiliation, etc.

Key Requirements:

• Must be a U.S. Citizen.
• Must be registered or exempt from the Selective Service. See www.sss.gov
• A one-year probationary period may be required.
• To ensure the accomplishment of our mission, DHS requires every employee to be reliable and trustworthy. To meet those standards, all selected applicants must undergo and successfully pass a background investigation. This position requires a Public Trust clearance.
• This not a Bargaining Unit position.
• Selectee must be able to obtain/maintain a valid state driver's license.
• All Federal employees are required to have Federal salary payments made by direct deposit.

Qualifications

Basic Requirements: This position has a positive Education Requirement in addition to at least one year of Specialized Experience or substitution of education for experience or combination (if applicable) in order to be found minimally qualified. Transcripts must be submitted with your application package. You MUST meet the following requirements:

EDUCATION: Basic Requirements:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

To qualify at the GS-12 grade level, your resume must demonstrate at least one (1) full year of specialized experience equivalent to at least the GS-11 grade level in the federal or private sector. Specialized experience is experience that has equipped you with the ability, skill, and knowledge to successfully perform the duties of this position and is typically in or related to this line of work. Examples of specialized experience include performing the following types of tasks on a regular and recurring basis.

NOTE: All experience statements (i.e., duties, specialized experience, or occupational assessment questionnaire) copied from this announcement and pasted into your resume will not be considered as a demonstration of your qualifications for this position.

Specialized experience may include the following:

• Planning specific objectives, milestones, and phases for complex engineering projects;
• Performing facility asset management; developing project priorities and programming strategies;
• Providing technical guidance to contractor counterparts; conducting site visits;
• Planning and executing logistics responsibilities; or planning and conducting interdisciplinary studies and investigations.

NOTE: Education cannot be substituted for experience at this grade level.

National Service Experience (i.e., volunteer experience): Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. The Office of Personnel management (OPM) must authorize employment offers made to current or former political appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule, C, Non-career SES or Presidential Appointee employee in the Executive Branch, you must disclose this information to the Human Resources Office.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume and supporting documentation to ensure you meet the basic qualification requirements. Under the provisions of direct hiring authority, rating, ranking and veterans' preference does not apply; therefore any responses to the questionnaire will not be used to determine a scored rating. All applicants who meet the minimum qualifications in the job opportunity announcement, will be referred for selection consideration. The necessary competencies to perform this job are:



While veterans' preference does not apply in DHA, preference eligibles are encouraged to submit their supporting documentation (DD-214 stating disposition of discharge or character of service, VA letter, SF-15, etc.).

Career Transition Assistance Plan (CTAP) and Interagency Career Transition Assistance Plan (ICTAP) documentation. CTAP and ICTAP Eligibles: CTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position. If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. Individuals must be well-qualified. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Career Transition Resources website at: https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/ctap_guideline.pdf

Limit your resume to no more than two pages. The USAJOBS database will not allow an applicant to submit an application that includes a resume over two pages.

Resume showing relevant work/volunteer experience, education, and training. Include the start and end dates (mm/dd/yy to mm/dd/yy) and the number of hours per week worked/volunteered.

Your responses to any applicable assessments.

Are you a current or former federal employee? Submit a copy of your most recent SF-50, Notification of Personnel Action that demonstrates your eligibility for consideration, e.g., length of time you have been in your current grade; your highest grade held; your current promotion potential and proof of permanent appointment if applying based on an interchange agreement. Examples of appropriate SF-50s include promotions, within-grade increases and accessions.
Are you qualifying based on education? Submit a copy of your college transcript (unofficial is acceptable) from an accredited institution. Once selected and prior to appointment, applicants must provide an official college transcript. Education completed in foreign colleges or universities may be used to meet Federal qualification requirements if you can show that your foreign education is comparable to education received in accredited educational institutions in the United States. In order to receive this credit, you must submit evidence of equivalency as provided by a credentialling evaluation service. It is your responsibility to provide such evidence with your application. See Recognition of Foreign Qualifications

Political Appointees: OPM must authorize employment offers for former or current Political Appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule C or Non-Career SES employee in the Executive Branch, you must disclose this information. Submit proof of your former or current status, such as your SF-50.

CTAP & ICTAP applicants MUST submit documentation verifying your eligibility. This includes a copy of your agency notice, a copy of your most recent performance rating, most recent SF-50-Notification of Personnel Action noting your current position, grade level and duty location, and documentation from your agency showing your current promotion potential. View information about CTAP/ICTAP eligibility on OPM's Career Transition Resources website.

Any other supporting documentation required for verification as described in the announcement.

NOTE: Failure to provide required documents could result in elimination of consideration.

Next steps