Clarification from the agency

All U.S. Citizens

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Acq Demo Business and Technical Management to recruit and appoint qualified candidates to positions in the competitive service.

As a General Engineer at the NH-0801-4 broadband level, some of your typical work assignments may include:

• Directing, reviewing, coordinating, and implementing broad strategies, policies and procedure for programming, planning, developing, acquisition and execution of the quality, mission assurance and assurance integration programs.
• Provides overall planning, direction, control, and management of division activities.
• Establishes program criteria and standards, formulates quality, mission assurance, and assurance integration programs, and validates program requirements.
• Monitors and directs major elements of division work tasks.
• Develops policies and guidance for the organization, operations and management of the division.
• Plans, directs, and controls broad aspects of the development and maintenance of policies and criteria by which MDA acquires/supports its Quality, Mission Assurance, and Assurance Integration Program.
• Necessitates constant interface with the Services, the Service higher headquarters, OSD, other federal officials, community and private sector individuals.
• Ensures lessons learned are transmitted to the field to MDA's Quality, Mission Assurance, and Assurance Integration programs conform with and are fully integrated to support Missile Defense System testing.
• Represents MDA QS on field visits to various Services, Commands, and Program Offices to assist in the planning, development, acquisition, and execution of the quality, mission assurance, and assurance integration programs and processes.
• Serves as a technical consultant on policy issues affecting program quality, manufacturing mission assurance, and assurance integration.
• Ensures that functions and operations are performed uniformly, economically, and in accordance with MDA policies and procedures.
• Represents MDA at various industry forums or other outside activities as required.
• Previews correspondence of the organization for technical proficiency and compliance with the directives and guidance involving important policy, including the review of many varied special projects initiated and controlled through the organization.
• The physical demands of the work requires considerable and strenuous physical exertion, such as traverse (up and down) ladders, occasional moderate/heavy lifting, must not have abnormal anxiety to temporarily work in confined spaces, and walking/standing for long periods of time. The work requires specific physical characteristics and abilities, such as above average agility and dexterity. The work environment involves risks with a variety of potentially dangerous situation that require safety precautions that must be followed. Must be able to work around chemicals, solvents, dust and particulates that may be encountered inside/outside any of these manufacturing test facilities without the need of a respirator.

Conditions of employment

• Must be a U.S. Citizen
• Occasional Travel
• Work Schedule: Full-time
• Males born after 12-31-59 must be registered for Selective Service
• Suitable for Federal employment, determined by a background investigation
• May be required to successfully complete a probationary period
• Overtime: Occasionally
• Tour of Duty: Maxi Flex
• Recruitment Incentives: Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees based on agency policy and availability.
• Fair Labor Standards Act (FLSA): Exempt
• Financial Disclosure: Required
• Telework Eligibility: This position is situational telework eligible.
• Supervisory Probationary Period: May be required to successfully complete a supervisory probationary period.
• This is a drug tested designate position.
• Employee must obtain/maintain Non-critical Sensitive/Secret security clearance
• This is an acquisition position coded Practitioner in Engineering and Technical Management. Incumbent must obtain mandatory Back-to-Basics (BtB) certification within 60 months of entry into position.
• Incumbent must acquire 80 Continuous Learning Points every 24 months.
• For employees permanently assigned to a facility that Processes Printed Wiring Boards into Circuit Card Assemblies, IPC-A-600 (printed wiring boards) shall also be maintained. New employees, this requirement shall be met within 2 years of hiring."

Qualifications

You may qualify at the NH-04 Broadband Level, if you fulfill the following qualifications:

One year of specialized experience equivalent to the NH-03/GS-13 grade level in the Federal service as listed below and must meet specialized experience listed below to be qualified: Applicants are required to meet 2 of 3 statements in order to be qualified.

• Designing complex mechanical or electrical aerospace assemblies.
• Manufacturing/testing complex mechanical or electrical aerospace assemblies.
• Auditing processes associated with the manufacturing/testing of complex mechanical or electrical aerospace assemblies.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

In addition to meeting qualifications, your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0801, series as listed below:

Individual Occupational Requirements:
Basic Requirements
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) NOTE: Failure to provide transcripts will result in you being rated ineligible for this position. All materials must be submitted by the closing date of the announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume and supporting documents, to ensure you meet the basic qualification requirements. We will evaluate each applicant who meets the basic qualifications on the information provided and evaluate your relevant work experiences as it relates to fundamental competencies, identified below, required for this position.

Traditional rating and ranking of applications does not apply to this vacancy. Your application (resume and supporting documentation) will be evaluated to determine if you meet the minimum qualifications required as listed on the announcement under qualification requirements.

Veterans Preference: If you are entitled to veterans preference, you should indicate the type of veterans' preference you are claiming on your resume. Your veterans' preference entitlement will be verified by the employing agency.

For information on entitlement see http://www.fedshirevets.gov/job/vetpref/index.aspx


Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp): To receive this preference, you must choose to apply using the " Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp)" eligibility. If you are claiming Military Spouse eligibility and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager. Information and required documentation for claiming Military Spouse eligibility may be found at the General Applicant Information and Definitions link below.

The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc.). Your complete application includes your COMPLETE resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.

The following documents are REQUIRED

1. Your resume:

• All applicants are required to submit a resume limited to two (2) pages showing all relevant experience. Your resume must address your qualifications for the position, and it may not exceed two (2) pages. Your 2-page (or less) resume must be in PDF format, with no smaller than a 0.5" margin and no smaller than a 10-point font. If you submit a resume that exceeds the two-page limit and/or does not meet the margin or font limitations stated herein, you will immediately be deemed ineligible for this position and will be removed from further consideration. Must include the work schedule, hours worked per week, dates of employment, and duties performed. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
• Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started.

2. Transcripts:

• This position has a degree or education requirement so you are required to submit a copy of your transcript.

3. SF50

• It is recommended that all current and former civilian Federal employees submit a copy of your MOST RECENT SF50 (Notification of Personnel Action) showing your tenure, grade and step, salary, and type of position occupied (i.e., Excepted or Competitive); or similar Notification of Personnel Action documentation, i.e., Transcript of Service, Form 1150, etc.

PLEASE REVIEW THE BELOW LINK FOR OTHER SUPPORTING DOCUMENTS needed for proof of eligibility:
https://www.dla.mil/Portals/104/Documents/Careers/downloads/DODCustomersRequiredSupportingDocumentation.pdf?

Next steps