This job is open to
Internal to an agency
Current federal employees of the hiring agency that posted the job announcement.
Career transition (CTAP, ICTAP, RPL)
Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants.
Veterans
Veterans of the U.S. Armed Forces or a spouse, widow, widower or parent of a veteran, who may be eligible for derived preference
Military spouses
Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty.
Clarification from the agency
This job is open to current permanent competitive service DCMA employees; Veterans eligibilities include Veterans Employment Opportunities Act (VEOA); Military Spouse Preference (MSP), Retained Grade Preference (RGP), and Military Reserve and National Guard Technician eligibles may also apply.
Requirements
Conditions of employment
- Must be a U.S. citizen
- Security Requirements: Sensitive Compartmented Information
- Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
- Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
Qualifications
To qualify for an General Engineer position your resume and supporting documentation must support:
A. Basic Requirement:
A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
A combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.
- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
AND
C. Specialized Experience: In addition to the basic requirement above, you must possess one year of specialized experience that equipped you with the competencies to successfully perform the duties of the position and is directly in or related to this position. To qualify for the NH-03 level, specialized experience must be at the NH-02 or GS-11 grade level or equivalent under other pay systems in the Federal service, military, or private sector. Creditable specialized experience includes:
- Applying engineering and analysis principles, concepts, and standards in support of complex defense acquisition systems.
- Performing oversight of the Systems Engineering Development Life Cycle for major Acquisition programs and provide technical support pertaining to missile systems and sensor technologies.
- Conducting reviews of contracts and in conducting reviews of contractor performance; proposing and providing technical advice on changes relating to contract applications/developments.
- Leadership capacity conducting engineering and analytical surveillance on substantive/critical and unique changes of advanced engineering functions implementing agency policy, and new/developmental processes.
Education
Substitution of education may not be used in lieu of specialized experience for this grade level.
If the position has a minimum education requirement you MUST provide transcripts (unofficial are acceptable at the time of application) to support your educational claims. Or, if you are using education to qualify in lieu of specialized experience you MUST provide transcripts (unofficial are acceptable at the time of application) to support your educational claims. The transcripts must include your name, the name of the college or university, class/course list, completed number of credits/hours, and the date degree conferred (if applicable). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Licenses must be current at time of application.
GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
Additional information
- This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: DoDI 1400.25-V300.
- Tour of Duty: 1st Shift
- FLSA: Exempt
- Bargaining Unit: No
- If selected for an interview, you may be required to provide your last three performance appraisals to the panel.
- Selectee may be required to serve a trial/probationary period.
- Financial Disclosure Required
- Acquisition, Technology & Logistics (AT&L) NON-CAP: Position requires DoD Acquisition Engineering and Technical Management, Practitioner certification within required timeframes. Selectee must also achieve 80 hours of Continuous Learning Points (CLPs) every 2-years. Click here for more details and Resources.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
The assessments for this job will measure the following Competencies:
- Attention to Detail
- Customer Service
- Decision Making
- Flexibility
- Influencing/Negotiating
- Integrity/Honesty
- Interpersonal Skills
- Learning
- Reading Comprehension
- Reasoning
- Self-Management
- Stress Tolerance
- Teamwork
Please follow all instructions carefully. Errors or omissions may affect your eligibility and/or score.
Once the application process is complete, a manual review of your resume and supporting documentation will occur to determine if you are eligible and among the best qualified as determined by the predetermined cutoff score. Your score is based on your responses to the assessment questionnaire.
If you meet the minimum qualifications of this position, you may be presented with instructions on how to access the USA Hire Assessment. This additional online assessment is required and must be completed within 48 hours following the close of this announcement unless you have requested Reasonable Accommodation for the USA Hire Competency Based Assessments. Your results will be kept on record for one year when applying for future jobs that require the same USA Hire Competency Based Assessments.
Required Documents
Required documents for submission vary based on the authority you are using to apply (e.g., applying as a veteran, a current permanent Federal employee, a reinstatement, etc). Your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
The following documents are REQUIRED:
1. Your resume:
- IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
- Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started.
- To ensure full credit for time worked regarding qualifications determinations your resume must include your work schedule. You are strongly encouraged to ensure your resume contains the number of hours worked per week and the specific dates of employment (i.e.,"40 hrs per week; 1/15/2020 - 1/14/2022" or "30 hrs per week; 1/15/2020 - Present").
2. Veteran's Documents:
3. Current Federal Employees:
- You must provide a SF-50 (most current Gen Adj or WGI actions are best), or other equivalent official "Notification of Personnel Action" (Note: Request for Personnel Action (SF-52) is NOT acceptable.) Your SF-50 must reflect Tenure (Block 24) and Position Occupied (Block 34).
4. Transcripts (must include your name, the name of the college or university, class/course list, completed number of credits/hours, and the date degree conferred (if applicable): Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Licenses must be current at time of application.
- This position has a degree or education requirement so you are required to submit a copy of your transcript.
Please review the link for ICTAP, ALL PPP ELIGIBILITIES AND OTHER SUPPORTING DOCUMENTS needed for proof of eligibility: Supporting Document.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.