General Engineer - Direct Hire Job in Location Negotiable After Selection

Vacancy No. NHTSA.NRM-2024-0011 Department National Highway Traffic Safety Administration
Salary $86,962.00 to $191,900.00 Grade 12 to 14
Perm/Temp Permanent FT/PT Full-time
Open Date 11/7/2024 Close Date 11/27/2024
Job Link Apply Online Who may apply Public
Locations:
Location Negotiable After Selection


Summary

The position serves as a technical expert within one of three divisions of the Office of Automation Safety: Automation Standards (NRM410), Automation Exemptions (NRM420) and Special Programs (NRM430). These divisions work closely to plan, initiate, coordinate, and lead a regulatory program for the safe governance of vehicles equipped with automated technologies by: developing and maintaining standards and regulations; managing exemption mechanisms; and creating and overseeing special programs.

This job is open to

Clarification from the agency

Applications will be accepted from any U.S. citizen. Direct Hire Authority will be used to fill this position. The 'Rule of Three', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.

Duties

(Cont. from Summary) 

The Office of Automation Safety at NHTSA (NRM400) is in the process of recruiting qualified individuals for several roles within their organization. Following an interview process, selected applicants will be assigned to one of three divisions in the NRM400 office—NRM410, NRM420, or NRM430—and will report directly to the corresponding division's Chief.

The General Engineer:

  • Contributes to/leads the planning, initiation, drafting, and coordination of a comprehensive regulatory program for the safe governance of both light and heavy vehicles equipped with automated technologies.
  • Conducts and/or leads independent reviews and analyses identifying research needs as required to ensure that the methodologies and guidelines related to automated technology standards, exemptions, or special programs are practicable and reasonable.
  • Monitors and reviews activities, results of research, and analyses conducted by entities both within and outside NHTSA. Maintains an up-to-date knowledge of the state-of-the-art in such areas as automated vehicle safety, capability, sensor technology, deployments, and regulations and evaluates the applicability of such knowledge to NHTSA’s activities.
  • Manages and coordinates technical review of exemption applications that may include an analysis of material submitted, a search and survey of relevant information available to the agency, and the collection of additional information. Recommends the grant or denial of exemption applications and, upon approval of recommendations, drafts and coordinates the necessary documentation.
  • Conceives, develops, and coordinates programs that respond to potential or emerging challenges related to vehicle automation. Creates detailed approaches, descriptions, and analysis methods within these programs and utilizing associated data to further the identification and understanding of proposed solutions to safety problems.

NHTSA is looking for an employee who possesses the ability to lead and contribute to multidisciplinary group projects, has excellent written and oral communication skills, and has expert technical experience with automated vehicle systems or related fields, particularly in relation to safety.

Requirements

Conditions of Employment

  • You must be a U.S. citizen & meet specialized experience to qualify
  • Submit application and resume online by 11:59 PM EST on the closing date
  • Required documents must be submitted by the closing date.
  • Direct Hire Authority will be used to fill this position

CONDITIONS OF EMPLOYMENT:

  • SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service.
  • GOVERNMENT TRAVEL CARD: This position involves travel.  A government contractor-issued travel card will be issued and must be retained for official business only.
  • PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).
  • TELEWORK ELIGIBILITY: This position may be eligible for occasional and/or regularly scheduled telework. The number of telework days approved will be determined by your immediate supervisor or manager following the agency’s telework policy and guidance. If participating in the telework program, you will be required to sign a telework agreement detailing agency telework policy requirements, working conditions, and expectations for the position.
  • REMOTE WORK: This position may be eligible for remote work, which does not require reporting to the agency worksite location on a regular basis. If selected for a remote work location, you will be required to sign a remote work agreement detailing agency remote work policy requirements, working conditions, and expectations for the position.

Qualifications

To meet the minimum qualifications for this position, you must (1) meet the Education Requirement for the series, (2) provide a copy of transcripts for verification, AND (3) meet either the education or experience qualifications for the grade at which you are requesting consideration.

To qualify for the GS-12, you must have at least one year of experience equal or equivalent to the GS-11, it must include:

  • Experience planning and working on mechanical, electrical, software, and/or other engineering programs.
  • Experience communicating in a structured manner on a regular basis or as required by specific project needs.

To qualify for the GS-13, you must have at least one year of experience equal or equivalent to the GS-12, it must include:

  • Experience planning and working on mechanical, electrical, software, and/or other engineering programs related to vehicles, automation, or safety.
  • Experience in coordinating a technical project with other team members.
  • Experience communicating technical information through briefings, reports, or other structured means on a regular basis or as required by specific project needs.

To qualify for the GS-14, you must have at least one year of experience equal or equivalent to the GS-13, it must include:

  • Experience planning, initiating, and leading mechanical, electrical, software, and/or other engineering programs related to vehicles, automation, or safety.
  • Experience independently leading technical projects and communicating directly with organizational leadership for specific engineering project needs.
  • Experience identifying, analyzing, and presenting multiple strategic options and implementing the selected strategy, such as product design or regulatory approach alternatives.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

  1. Knowledge in any of the following areas: systems engineering, vehicle automation, product and software development, safety management methods and systems, hazard analysis, risk assessment, safety validation methodologies, or related fields.
  2. Ability to effectively communicate orally and in writing, so that the expression is logical, clear, and convincing.
  3. Ability to lead a technical project or initiate and develop a technical program.
  4. Ability to apply technical skills to lead projects requiring complex solutions stemming from either a multidisciplinary scope, an obscure technical subject matter, or consideration and management of multiple differing stakeholder interests.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

For additional information about applying to Federal positions, please click on the following link:  https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/

All applicants must meet all qualification requirements by the closing date of this announcement.

Education

A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR

Combination of education and experience -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive).

(2) Specialized Experience:
To determine which grade(s) you are eligible for, review the following grade specific details.  You will be asked questions as part of your application but make sure to verify how you meet this experience in your resume or you may be deemed ineligible.

(3) Upload the appropriate document(s) to your application for verification purposes. (Refer to 'Required Documents' section for additional guidance).
Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date.  Other applicants must meet all qualification requirements by the closing date of this announcement. Transcripts are required for this position.

Additional information

The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, FairChanceAct@dot.gov. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation 

This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate.

Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager.

Benefits

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

For this announcement, all applicants will be reviewed to determine if they meet the basic qualifications for this position, specifically the educational requirements.  Applications that are verified to meet the basic qualifications will be referred to the selecting official.

Applicants will not be rated or ranked.  Veteran’s Preference does NOT apply.

DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC.  WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE.  All answers provided in the on-line process must be substantiated by a resume.  If, upon review, it is determined that your resume and/or supporting documents do not support your answer choices, your application may be removed from consideration.

Please ensure that your work history provides enough details to support your answers.


You may preview questions for this vacancy.

Required Documents

RESUME: – Your resume MUST contain specific information used to make a qualification determination that includes employment beginning and ending dates for each position, whether employment is Full-time or Part-time or average number of hours worked per week, and position titles.  If the position is/was in the Federal government, you will need to provide the position series and grade level.  The resume should show relevant experience and education as well as support the required specialized experience. Formatted resumes may be uploaded later in the application process. For assistance with the resume builder, please visit:  https://help.usajobs.gov/how-to

TRANSCRIPTS are REQUIRED since there is a stated education requirement for the series.  The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. 

  • ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT.

DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the well qualified standards for this vacancy (meeting minimum requirements for position and scoring at least an 85) and provide all of the following documents:  

  • your most recent performance appraisal,
  • the proof of eligibility letter from the Agency, and
  • your most current SF-50, displaying current series and grade.

Displaced employees may be eligible for ICTAP or CTAP priority consideration.  

For more information, please review the OPM Employee's Guide to Career Transition.

Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system.  You must verify that the documents are in the system with your application prior to final submission.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to Apply

You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement.

  • To begin, click the "Apply Online" button on the job announcement posting.
  • Follow the directions to register, submit all required documents and complete the assessment questionnaire.
  • You may review your saved application(s) at https://help.usajobs.gov/

If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at:  Transjobs@dot.gov

Agency contact information

Automated Staffing Office
Address
DOT, NATIONAL HIGHWAY TRAFFIC SAFETY ADMIN
1200 New Jersey Ave SE / HAHR - 50
Washington, District of Columbia 20590
United States
Learn more about this agency

Next steps

You may check your application status by logging into USAJobs.com (Select "My USAJobs" and click "Applications".  Within two weeks of the closing date, a Human Resources Specialist will evaluate your application. Qualified candidates will be referred to the hiring manager. If you are selected for an interview, the hiring agency will contact you directly.  Once the position is filled, we will notify all applicants of their final status.


Note: We cannot accept applications on behalf of Federal Agencies. Application instructions are listed within the Job Description.