Requirements
Conditions of employment
- U.S. Citizenship is required
- Males must be registered for Selective Service, see Legal and Regulatory Guidance
- This posn is subject to provisions of the DoD Priority Placement Program
- For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
- Recruitment incentives may be authorized
- This position requires Secret or Top Secret or SCI security clearances as well as possible clearances with special access programs.
- Employee must maintain current certifications
- This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Shift work and emergency overtime may be required
- Disclosure of Political Appointments
- All federal employees are required to have direct deposit.
- Subject to Temporary Duty Assignment (TDY) by military or commercial aircraft approximately 30 days per year.
- Selectee may be required to serve a probationary or trial period.
- This position has been designated as a Non-Critical Acquisition Position and is covered by the Acquisition Professional Development Program (APDP).
- The selectee must meet, or be capable of achieving the APDP certification as designated on the position description within the defined grace period for that certification level after assignment.
- This position also requires the employee to engage in acquisition continuous learning activities achieving 80 Continuous Learning points every 24 months.
- May be eligible for situational telework only, including Emergency and OPM prescribed "Unscheduled Telework"
Qualifications
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, All Professional Engineering Positions located here.
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: You must meet one of the following qualification requirements by the closing date of the announcement and provide documentation to support your qualifications (If you are using education to qualify, failure to submit the required documentation will result in you being rated ineligible. See sections on "College Transcripts" and "Foreign Education" below for required documentation.): To view qualifying educational requirements and/or combination of education and specialized experience click on the following link:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems. Specialized experience is encompassing a range of engineering tasks that draw on electronics, mechanical, aerospace, and other fields to satisfy customer needs and involves utilizing emerging technologies and business practices to devise effective solutions, performing analyses through systematic methods, and overseeing projects/test planning expertise to meet business and technical objectives. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.
Ideal Candidate:
- Demonstrated expertise in DLA Energy SRM and MILCON programs supporting fueling facility maintenance, repair, and modernization
- Thorough knowledge of UFC 3-460-01 and UFC 3-460-03 requirements
- Strong background in fuels facility design and construction practices
- Working knowledge of API 653 and STI SP001 tank inspection standards
- Understanding of structural and hydraulic integrity principles for fuel storage systems
- Familiarity with API pipeline integrity principles
- Basic knowledge of environmental compliance requirements applicable to fueling facilities.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a wide range of multidisciplinary professional engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to project development, execution, and advisory services.
2. Knowledge of development engineering methodologies sufficient to apply experimental theories and/or new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment.
3. Knowledge of systems engineering practices and procedures as they pertain to sustainment, modification, logistics, and production management principles, concepts, policies, and systems.
4. Knowledge of the principles of planning and program management; of standard acquisition regulations, practices, and procedures; and of other engineering disciplines used in support of sustainment, modification, and maintenance programs.
5. Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches; to assess the impact of new technology on current systems and processes; and to gather, assemble, and analyze facts, from conclusions, and devise and recommend solutions to problems.
6. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in professional manner with peers, management, contractors, academia, and other agencies.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
Basic Requirements for 0801:
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: YOU MUST SUBMIT TRANSCRIPTS.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) 1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise. NOTE: YOU MUST SUBMIT TRANSCRIPTS.
ARE YOU USING YOUR EDUCATION TO QUALIFY? If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Additional information
This public notice is to gather applications that may or may not result in selection.
This job announcement may close at any time - apply now!
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
- Online Application: Questionnaire
- Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
- Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214,
Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service/discharge and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.