Clarification from the agency

"Agency" means current permanent DoD employees. Veterans eligibilities include 30% or more Disabled Vet and Veterans Employment Opportunities Act (VEOA). Military Spouse Preference (MSP) eligibles, Retained Grade Preference (RGP) eligibles, and Military Reserve and National Guard Technician eligibles in the commuting area may also apply.

• Serves as a subject matter expert and coordinate engineer effort related to the Energy Resource Management Program.
• Identifies new projects based on (Executive Order, etc.) requirements, and develops, coordinates, integrates, and implements new technology and criteria as a result.
• Develops plans and proposals for alternative, renewable sources of energy, to meet future requirements while still maintaining Executive Order and statute directives for constant reduction of energy usage.
• Develops plans and implements Energy Cost Avoidance (ECA) projects that reduce the annual cost of energy and water usage.
• Provides technical assistance and guidance to Facility Supervisory General Engineer, Site, Director, Facility Managers, and other site engineers as well as host facility maintenance support.
• Collaborates with DLA Distribution’s energy resource managers to develop a standardized energy reporting protocol to provide a mechanism to track, analyze and report energy consumption data and costs at all DLA Distribution host and tenant locations.

Conditions of employment

• Must be a U.S. citizen
• Tour of Duty: Flexible (https://www.dla.mil/Careers/Join-Our-Team/Benefits/#Work)
• Security Requirements: Non-Critical Sensitive
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Not Authorized
• Bargaining Unit Status: Yes
• Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See https://www.tsa.gov/real-id for more information.
• Licenses/Certifications: Incumbent shall have a Certified Energy Manager (CEM) certificate or shall be able to obtain one within one year of appointment to this position.
• Pre-Employment Physical: Required

Qualifications

To qualify for a General Engineer (Regional Energy Program Manager) your resume and supporting documentation must support:

A. Basic Requirement: A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

A. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

AND

B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position. In addition to meeting the Basic Requirement above, to qualify for the GS-13 grade level, specialized experience must be at the GS-12 grade level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including time-in-grade (General Schedule (GS) positions only), time-after-competitive appointment, minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes:

• Developing, coordinating, and issuing procedures, strategies, goals and processes to implement Federal energy mandates.
• Evaluating projects and program against requirements and deadlines and adjusts as necessary.
• Coordinating and guiding investment strategy supporting energy program goals and objectives.
• Developing plans and implementing Energy Cost Avoidance (ECA) projects.
• Provides professional engineering services to DLA organizations on energy/water conservation matters.

Other Requirements: Incumbent shall have a Certified Energy Manager (CEM) certificate or shall be able to obtain one within one year of appointment to this position.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Demands: While some of the work is sedentary, the work requires lifting up to 50 pounds on a regular and recurring basis. The position also requires long periods of standing, or recurring and considerable walking, stooping, bending, crouching, and climbing such as in performing regular and periodic Energy Audits and during energy project programming and development. Incumbent will be required to travel to sites with Energy Audit equipment weighing as much as 50 pounds not including personal necessities for travel.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The assessments for this job will measure the following Competencies:

• Attention to Detail
• Customer Service
• Flexibility
• Influencing/Negotiating
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Self-Management
• Stress Tolerance
• Teamwork
• Decision Making
• Reading Comprehension
• Reasoning

Once the application process is complete, a review of your resume and supporting documentation may be completed and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. The rating you receive is based on your responses to the assessment questionnaire and USA Hire assessments. The score is a measure of the degree to which your background matches the competencies required for this position. If your resume and/or supporting documentation is reviewed and a determination is made that you have inflated your qualifications and or experience, you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your rating.

To apply for this position you must provide a complete Application Package. Each Application Package MUST include:

1. Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans.
   
2. Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.
3. If you are requesting a reasonable accommodation to the USA Hire Competency Based Assessments, submit documentation to support your request, including the Reasonable Accommodation Request Form found here.

Interagency Career Transition Assistance Program (ICTAP): If you are an eligible ICTAP applicant you may apply for special selection over other candidates for this position. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated at a score of 85 or higher for this position. ICTAP eligibles must submit one of the following as proof of eligibility for the special selection priority: a separation notice; a "Notice of Personnel Action" (SF-50) documenting separation; an agency certification that you cannot be placed after injury compensation has been terminated; an OPM notification that your disability annuity has been terminated; OR a Military Department or National Guard Bureau notification that you are retired under 5 U.S.C. 8337(h) or 8456.

Priority Placement Program (PPP) DoD Military Spouse Preference (MSP): In order to receive this preference, you must choose to apply using the "Priority Placement Program, DoD Military Spouse Preference (MSP)" eligibility. If you are claiming MSP and are determined to be among the Best Qualified for the position, you may be referred to the hiring manager as a priority applicant. To be eligible as a MSP, you must submit the following supporting documents with your application package: Spouse's Permanent Change of Station (PCS) orders; Marriage Certificate or License; PPP Self Certification Checklist; Veterans' Preference documentation (e.g., DD-214, VA Letter, Statement of Service, if applicable); Transcripts (if applicable). These documents must provide acceptable information to verify: Residency within the commuting area of your sponsor's permanent duty station (PDS); proof of marriage to the active duty sponsor; proof of military member's active duty status; and other documentation required by the vacancy announcement to which you are applying. NOTE: Previous federal employees must also submit the following additional documentation: SF-50s (e.g., LWOP, highest grade held, overseas appointments, etc.), SF-75 information, and documentation of performance rating of record (dated within the last 12 months). Selected PPP MSP applicants will need to certify they have not accepted nor declined another offer of permanent, Federal employment (to include NAF and the military exchange services) since relocating to the military sponsor's current duty station.

Priority Placement Program (PPP) DoD Retained Grade Preference (RGP): In order to receive this preference, you must choose to apply using the "Priority Placement Program, DoD Retained Grade Preference (RGP)" eligibility. If you are claiming RGP and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager as a priority applicant. Information and required documentation for claiming RGP may be found at the General Applicant Information and Definitions link below. To be eligible as a RGP, you must submit the following supporting documents with your application package: a signed Retained Grade PPP Self-Certification Checklist (DD3145-1 (whs.mil)); a copy of your Notification of Personnel Action (SF-50) effecting the placement in retained grade status; or a copy of the notification letter you received regarding the RIF or classification downgrade.

Next steps