Requirements
Conditions of employment
- U.S. Citizenship is required
- Males must be registered for Selective Service, see Legal and Regulatory Guidance
- This posn is subject to provisions of the DoD Priority Placement Program
- For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
- Relocation costs or other incentives may be available and considered by the organization.
- The work requires the incumbent to obtain and maintain the appropriate security clearance.
- Employee must maintain current certifications
- This position may require drug testing, and the candidate may be subject to passing a drug test upon selection.
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Travel by regularly scheduled commercial or military aircraft in accordance with Joint Travel Regulations may be required in performance of TDY.
- Disclosure of Political Appointments
- All federal employees are required to have direct deposit.
- This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- The duties of this position require an advanced level of competence in basic science. The incumbent must possess an engineering degree from an institution with ABET accredited engineering program.
- Employee is expected to meet Continuing Acquisition Education requirements. The Acquisition Position Career Category (APCC) of the position is T Test and Evaluation (T and E) and the Acquisition Career Level required is 2 Intermediate Level II.
- Temporary duty away from home base may be required. Incumbent may be required to fly as a passenger on military aircraft.
- Selectee may be required to serve a probationary or trial period.
- A professional engineering degree at the bachelor’s level from an ABET accredited institution in general engineering or a closely related field.
- Required to handle and safeguard sensitive and/or classified information in accordance with regulations to reduce potential compromise.
Qualifications
Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific located here
BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:
A) Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: YOU MUST SUBMIT COPIES OF YOUR TRANSCRIPTS.
OR
B) Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
NOTE: YOU MUST SUBMIT COPIES OF YOUR TRANSCRIPTS.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems. Specialized experience is experience in Specialized experience is described as supporting the organization in general engineering assignments concerning Science and Engineering; early involvement of new development of weapon system capabilities and programs; technical support and applying engineering/programmatic knowledge within test and evaluation policy and practices. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.
KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of professional aerospace engineering concepts, principles, practices, standards, methods,
techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and
concepts to project development, execution, and advisory services.
2. Knowledge of development testing and evaluation sufficient to apply experimental theories and new
applications to issues and provide technical advice and direction in support of weapon systems, subsystems,
and/or support equipment.
3. Knowledge of integrated air-vehicles, ground systems, and support equipment sufficient to plan, design, test,
troubleshoot, evaluate, and oversee the development and/or sustainment of aerospace vehicles, systems,
equipment, and components.
4. Knowledge of other engineering disciplines and standard acquisition regulations, practices, and procedures.
5. Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design
approaches, and to assess the impact of new technology on current systems and processes.
6. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as
work in a professional manner with peers, management, contractors, academia, and other agencies.
7. Knowledge of program/project management techniques and computer software.
Ideal Candidate:
We are seeking a highly motivated and experienced technical professional with 2-10 years of experience in test and evaluation, acquisition of major weapon systems, or the development of high-speed technologies. The ideal candidate will have demonstrated success in managing complex technical projects and effectively handling customer engagements. Additionally, strong knowledge of high-speed/hypersonic systems, such as high-speed airbreathing engines or high-temperature materials, and familiarity with national facility-based test and evaluation capabilities are strongly encouraged.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.
Additional information
This public notice is to gather applications that may or may not result in selection.
This job announcement may close at any time - apply now!
This is an acquisition demonstration project position NH-03 equivalent to a GS-12 to GS-13.
Direct Deposit: All federal employees are required to have direct deposit.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
- Online Application: Questionnaire
- Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
- Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214,
Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service/discharge and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.