HEAVY MOBILE EQUIPMENT MECHANIC Job in Kirtland AFB, NM

Summary

This job is open to

• National Guard and reserves

  Current members, those who want to join or transitioning military members.

Duties

This position is located in the Air National Guard, Logistics Readiness Squadron, Vehicle Management Flight.
Its purpose is to maintain, troubleshoot, overhaul, repair, modify, and inspect heavy mobile equipment, various support equipment, and special purpose vehicles such as; fuel dispensing trucks, refueling equipment, crash/structural firefighting equipment and pump trucks, forklifts, materiel handling, aircraft cargo loaders, aircraft and equipment tow tractors, large runway snow removal vehicles, aircraft de-icing equipment, sweepers, bulldozers, mobile cranes, road graders, heavy construction and earth moving vehicles, backhoes, front end loaders, excavators, trenchers, and tactical/armored protected vehicles.

• Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines.
• Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.
• Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.
• Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.
• Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).
• Performs other duties as assigned.

Requirements

Conditions of Employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• This position is covered by the Domestic Violence Misdemeanor Amendment of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Must be able to obtain and maintain a state drivers license.

How You Will Be Evaluated

Required Documents

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12736599

A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.

To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.


To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Next steps

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.