Clarification from the agency

AREA OF CONSIDERATION: AREA I - All permanent and indefinite Enlisted (E-5 and below) Technicians in the Maine Air National Guard. AREA II - All Enlisted (E-5 and Below) of the Maine Air National Guard. AREA III- Those eligible to join the Maine Air National Guard (E-5 and below).

This position is located in the Air National Guard, Logistics Readiness Squadron, Vehicle Management Flight.

Its purpose is to maintain, troubleshoot, overhaul, repair, modify, and inspect heavy mobile equipment, various support equipment, and special purpose vehicles such as; fuel dispensing trucks, refueling equipment, crash/structural firefighting equipment and pump trucks, forklifts, materiel handling, aircraft cargo loaders, aircraft and equipment tow tractors, large runway snow removal vehicles, aircraft de-icing equipment, sweepers, bulldozers, mobile cranes, road graders, heavy construction and earth moving vehicles, backhoes, front end loaders, excavators, trenchers, and tactical/armored protected vehicles. The equipment may be commercial or military designed with diesel, gasoline, electric, hybrid electric, or other alternative fuel power and may have multiple engines. The work requires knowledge of how heavy duty machinery, engines, parts, and systems work; ability to detect faulty items, determine causes of malfunction, and determine best repair methods; and skill to assemble, disassemble, repair, rebuild or modify components and a variety of interconnected systems. Repairs include; integrated electrical, electronics, air, fuel, and hydraulic systems; complex state-of-the-art electrical and electronic systems requiring specialized scan/diagnostic equipment to identify malfunctions or to determine replacement of standard and computer controlled components.

MAJOR DUTIES:

1. Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit, or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test. (45%)

2. Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies. (15%)

3. Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members. (20%)

Conditions of employment

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.
• Must be able to obtain and maintain a Secret Security Clearance.

Qualifications

Military Grades: E5 & Below

Compatible Military Assignments: 2T3XX

GENERAL EXPERIENCE:
Experience or training that has provided the candidate with the skill to make repairs or the ability to assist with repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts.

SPECIALIZED EXPERIENCE:
Experience or training diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems. Experience which has provided a thorough knowledge of diagnostic equipment. Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems. Experience in testing, inspecting, and evaluating the work performed on heavy mobile vehicles, equipment and systems.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

1. Knowledge of and skill in repairing, overhauling and rebuilding major assemblies and systems of heavy mobile equipment and vehicles.

2. Ability to troubleshoot and diagnose complex malfunctions requiring knowledge of the interaction of several subsystems.

3. Skill in use of hand tools and precision measuring equipment such as micrometers, vernier calipers, dial indicators, wrenches, and screwdrivers.

4. Skill in use of diagnostic and test equipment such as engine analyzers, computerized diagnostic scan tools, oscilloscopes, compression testers, voltmeters, ohmmeters, ammeters, and various pressure gauges.

5. Ability to interpret technical manuals, illustrations, specifications, diagrams and schematics, to make repairs and modifications.

To apply for this position, you must submit a complete Application Package which includes:

1. Your resume showing:

• Contact Information-your name and the best way to contact you.
• Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade.
• Education, certifications or licensures.

It is highly suggested that applicants address the General and Specialized Experience required of the position within their resume or on a separate document. All information provided during the application process will be verified. Failure to address all General and Specialized Experience requirements may result in non-selection for an interview.

Next steps