Duties
1. Performs preflight weather analysis, route and altitude selections, alternate airport selection, fuel, cargo and passenger load computations, selection of refueling stops, preflight inspections, flight plan filing, and firing ranges route planning/coordination. Incorporates precision, non-precision, and GPS route navigation and instrument approaches in all mission planning and must be knowledgeable in all aspects of their operations. Maintains and studies current and complete files of aeronautical publications, navigation charts, instrument approach procedures, and air traffic control procedures.
2. Serves as rotary wing Unit Trainer/Evaluator (UT/E) or Instructor Pilot (IP): Trains and evaluates aviators on basic and advanced flight techniques. This includes the procedures to use in emergencies and malfunctions over rough terrain, e.g., hills and forests both day and night. Training includes instruction and evaluation for operating unique electronics equipment, such as precision, non-precision, and GPS route navigation and approaches. Conducts initial standardization flight evaluations for new air crew members and annual evaluations for assigned and attached pilots, including local aircraft transitions including refresher training. Serves as pilot-in-command while operating single and/or multi-engine rotary wing aircraft to perform airlift support for DOD personnel, emergency medical evacuations, aerial fire suppression support, paradrops, rescue, and Defense Support of Civil Authorities (DSCA) operations. May be required to transport classified, chemical, or other hazardous cargo. May be required to perform extended flights to and from a wide variety of points, with responsibility for safely transporting passengers and/or classified, chemical, or other hazardous cargo. Pilot will possess competency on all aviation matters that will encompass safety as the number one priority, demonstrate a consistent mature judgment and maintain a high degree of pilot proficiency for conducting flight missions under visual flight rules (VFR) and instrument flight rules (IFR). Flights may be performed with a combination of day, night, and night vision goggle (NVG) operations under both favorable and unfavorable environmental conditions (fog, sleet, ice, rain, snow, high winds, low ceilings) over both favorable and unfavorable terrain (mountains, water, desert, swamp, forest) which may require a transfer from IFR condition to marginal VFR condition for landing at remote locations. Locations may include a combination of confined areas with unfavorable terrain and obstacles and high altitude requiring an in-depth performance planning for take-off and landings under heavy load conditions. Flights could be conducted with a combination of unfavorable weather conditions, over unfavorable terrain or water at both low altitude and slow airspeed, at maximum gross weight, which are outside the recommended flight envelops for safe flight and/or involve the use of techniques employed as to avoid detection, and often entail prolonged periods of flying. Such flights, maintenance test flights, and low-level flights are such that a safe emergency landing would be difficult and would require a very high degree of pilot skill. Pilot will adhere to existing Army flight regulations and Federal Aviation Administration (FAA) regulations. (25%)
3. Performs one or more of the following major functional duties:
a. Serves as rotary wing Instrument Flight Examiner (IE): Conducts instrument flight qualifications and training which includes, instrument flight planning, precision handling and maneuvering of the aircraft, navigation using the aircraft navigation instruments and systems, air traffic control operations, approach, departure, and holding procedures, and use of the ILS. Conducts initial instrument standardization rides for new air crew members and as a minimum conducts annual check rides for assigned and attached pilots.
b. Serves as rotary wing Standardization Instructor Pilot (SIP): Trains and evaluates IP's and provides technical supervision of the standardization program. Ensures flight crew proficiency and qualification records are standardized and kept current.
c. Serves are Maintenance Test Pilot Examiner (ME)/Functional Check Pilot (FCP) Evaluator: Serves as rotary wing Maintenance Test Pilot Examiner/Function Check Pilot Evaluator. Trains and evaluates ME/FCP's and provides technical supervision and standardization of the maintenance program. Maintains requirements and performs function of technical inspector for aircraft assigned. Ensures ME/FCP pilot proficiency and qualification records are standardized and kept current. Maintains requirements and performs function of technical inspector for aircraft assigned.
Performs other duties as assigned.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12787916
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.