Requirements
Conditions of employment
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
- This posn is subject to provisions of the DoD Priority Placement Program
- This position may require drug testing, and the candidate may be subject to passing a drug test upon selection.
- Disclosure of Political Appointments
- This position may require travel
- Selectee may be required to serve a probationary or trail period.
- This position may require certification for servicing and maintaining automotive air conditioning systems.
- Selectee may require training on the handling and disposition of hazardous waste.
- Selectee may be required to train and/or guide lower grade personnel.
- Selectee may be required to assist higher grade automotive mechanics work on more complex repairs.
- Selectee may be required to drive a motor vehicle, and an appropriate, valid driver's license may be required.
- Selectee may be required to participate in mobility exercises.
- Selectee may be required to assume the duties and responsibilities of the Vehicle Maintenance Leader is his/her absence.
Qualifications
In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5800 Transportation/Mobile Equipment Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.
The screen out element for this position is Ability To Do The Work Of The Position Without More Than Normal Supervision
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
Knowledge of Equipment Assembly, Installation, Repair, etc.
Technical Practices (theoretical, precise, artistic)
Use of Measuring Instruments
Ability To Interpret Instructions, Specification, etc. (Includes blueprint reading)
Ability To Use and Maintain Tools and Equipment
Trouble shooting
IDEAL CANDIDATE: knowledge of equipment assembly, installation, and repair. Ability to apply theoretical, precise, artistic, technical practices. Exhibits use of instrument measuring. Interpret instructions, specifications, etc. including blueprint reading. Use and maintain tools and equipment.
KNOWLEDGE, SKILLS, AND ABILITIES (KSAs)
1. Knowledge of heavy mobile equipment assembly, installation, and repair, i.e., bulldozers, road graders, power
shovels, mobile cranes, heavy combat equipment, and missile transporters.
2. Knowledge of technical practices in order to repair/overhaul major systems (i.e., diesel, multi-fuel, and gasoline
engines, automatic and manual transmissions, multi-gear assemblies, and a variety of positioning systems) and to
remove, replace, clean, and install a variety of parts, components, and accessories (i.e., wheel cylinders,
universal joints, springs, shock absorbers, catalytic converters, clutch assemblies, mufflers, etc.).
3. Knowledge of safety regulations, procedures, and policies to include environmental directives pertaining to
handling hazardous materials.
4. Knowledge of equipment common to the trade, i.e., front-end alignment and wheel balancing equipment, turning
and grinding equipment for servicing brake drums and discs or rotor assemblies, and drilling and pressure
bleeding devices.
5. Skill in handling controls for starting stopping, backing, and driving fork lift trucks through narrow aisles in
buildings, up and down ramps, and in and out of railroad cars, trucks, planes, etc.
6. Skill in lifting, lowering, and tilting forks by moving hands, arms, feet, and legs to operate controls.
7. Skill in using measuring ins1ruments and test equipment such as test lamps, timing lights, multimeters, swell
meters, engine analyzers, dynamometers, exhaust analyzers, vacuum and fuel pump testers, injector testers,
ignition timers, tachometers,. ammeters, and ohmmeters.
8. Skill in troubleshooting mechanical problems, analyzing malfunctions, and determining the extent of repairs
necessary.
9. Skill in using basic tools common to the occupation, i.e., wrenches, screwdrivers, insulated pliers, electric drills,
pneumatic wrenches, and soldering irons.
10. Ability to maintain, troubleshoot, overhaul, repair, and modify a variety of heavy mobile vehicles and equipment
without more than normal supervision.
11 . Ability to maintain and repair combustion-powered automotive vehicles, electric-powered vehicles and
equipment, towed vehicles and equipment, over-the-road trucks, and comparable vehicles without more than
normal supervision.
12. Ability to interpret instructions, technical manuals, illustrations, specifications, diagrams, schematics, and
similar guides to make repairs and modifications.
13. Ability to use and maintain hand and/or power tools and equipment required to do the work of heavy mobile
equipment mechanic.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Additional information
Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.
Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.
120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.
Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.
Direct Deposit: All federal employees are required to have direct deposit.
Incentives: Recruitment and/or retention incentives may or may not be used.
Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.
If you have questions regarding this announcement and have hearing or speech difficulties click here.
Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 here for additional information.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
- Online Application: Questionnaire
- Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts. You will not be considered for this vacancy if your resume is illegible/unreadable. Additional information on resume requirements can be located under "How To Apply".
- Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
- Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
- Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action. The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement, block 34 may contain a "1" or "2".
- Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).
ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214,
Certificate of Release or Discharge from Active Duty. Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
- Name/Rank/Grade of Service Member
- Branch of Armed Forces
- Dates of Active Service (Start and End Date(s)
- Expected Date of Discharge/Release from Active Duty
- Terminal leave start date (if applicable)
- Expected character of service/discharge and type of separation (i.e. separation or retirement)
- Must be certified within 120 days of anticipated discharge
- Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
Note: The VOW Act provides tentative preference. If appointed, a DD Form 214 must be submitted upon receipt.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from
schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.