Interdisciplinary Civil Engineer/Physical Scientist (Environmental)

Clarification from the agency

This announcement is open to active Bonneville Power Administration employees with competitive status, currently on a career or career-conditional appointment.

As an Interdisciplinary: Civil Engineer, Physical Scientist (Environmental), you will:

• Responsible for the preparation, review, update, and coordination of environmental plans and reports (e.g., Spill Prevention Control and Countermeasure plans, Contingency plans, Storm water Pollution Prevention Plans, etc.) required for BPA facilities and actions.
• Ensure that plans meet the requirements of applicable Federal and state regulations.
• Develop a comprehensive, strategic plan to achieve environmental risk reduction objectives and maintain regulatory compliance, remedy potential problems, and achieve annual and long-term targets in assigned program areas.\
• Work with various performance, project, and program managers throughout the Bonneville Power Administration to integrate Pollution Prevention and Abatement's emergency spill response objectives with the work of Transmission Services.
• Responds to environmental emergencies resulting from BPA construction, maintenance, and operation activities (e.g., such as releases of hazardous or toxic substances and petroleum products, sediment discharges, etc.).
• Serve as an environmental lead, coordinator, and/or team member for assigned areas of responsibilities and activities for PP&A (Pollution Prevention and Abatement) and TS programs and projects.
• Provide technical direction, advice, training, and guidance and serves as a mentor to BPA personnel regarding environmental requirements, policies, and practices within area of technical responsibilities.

Conditions of employment

When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically. You must answer all of these questions completely and truthfully.

Key Requirements:

• You must be a United States Citizen.
• This employer participates in the e-Verify program.
• Males must abide by Selective Service registration requirements.
• You will be required to report in person to the official duty location.

Conditions of Employment:

• This position requires a valid driver's license as a condition of employment.
• After employment, this position may be subject to periodic physical examinations, as prescribed by competent medical authority and at BPA expense, if exposed to health hazards.
• Ability to Lift 50 lbs.
• Selectee will be required to complete the Office of Government Ethics Standard of Confidential Financial Disclosure Report (OFGE450e) within 30 days of employment and annually.
• Protective Clothing and Respiratory Equipment required for On-site Inspectors.
• Position supports the Bonneville Power Administration's (BPA) Pollution Prevention and Abatement Program and are primarily field related and will require routine travel. This travel will be throughout the entire BPA service area (i.e., Oregon, Washington, Idaho, and Montana)

Qualifications

BASIC REQUIREMENTS:

Civil Engineer (0810):
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR-

B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR-
3. Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-OR-
4. Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf


Physical Scientist (Environmental) (1301):

• Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. -OR-
• Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

SPECIALIZED EXPERIENCE REQUIREMENTS

A qualified candidate's resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-12) in the Federal service. Specialized experience is defined as Experience 1) Providing scientific and technical expertise for pollution prevention and abatement or natural resource protection projects and programs; 2) coordinating environmental permitting and environmental contract specification development; AND 3) interpreting, providing guidance on, and developing projects to comply with federal environmental rules and regulations.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

There is no substitution of education for experience at the GS-13 grade level.

Time-in-Grade: Current Federal employees must meet time-in-grade requirements by the closing date of this announcement to receive consideration.

CTAP candidates: To be considered "well qualified" you must meet all of the requirements as described in this section.

You must meet all qualifications and eligibility requirements by the closing date of this announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated for this job based on how well you meet the eligibility and qualification requirements above. Once the announcement closes, we will conduct a review of your application package to verify your eligibility and qualifications. If you are found qualified, your application will move forward to additional phases of the review process.

Minimum Qualifications: Once the application process is complete, the Human Resources Offices or Subject Matter Expert (SME) will review your two-page resume and supporting documentation to determine whether you meet the minimum job qualifications.

Selection will be based on skills and competencies, not educational credentials or self-reported experience.

Merit Promotion & VEOA Procedures: If you are minimally qualified for this job, your will be assessed and evaluated to determine if you are a best qualified candidate. Federal employees must meet time-in-grade requirements and current employees must have at least a fully successful or equivalent performance rating to receive consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, and other characteristics):

• Compliance
• Environmental Engineering
• Planning and Evaluating
• Technical Competence

Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified", which is defined as having a score of 85 or better.

You must meet all qualifications and eligibility requirements by the closing date (07/31/2026) of this announcement.

To preview the Assessment Questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/13014027

Structured Interview Review: After it has been determined that you meet the minimum qualifications, Subject Matter Experts (SMEs) will contact you to schedule an interview. During the interview, all candidates will be asked the same pre-determined questions, which are designed to evaluate the competencies needed for the role. Your responses will be scored on a rating scale based on these competencies. After the interview, scores from all interviewers will be compiled and factored into the overall evaluation. Your final score will reflect how well your qualifications and skills align with the position requirements. Participation in this interview is required for your application to be considered complete. If you do not complete the interview, you will be removed from further consideration for the position.

To apply for this position, you MUST provide a complete application package which includes:

• Your two (2) page RESUMEshowing all relevant work experience (paid and unpaid) including: duties performed; full name and address of each employer; start and end dates (month/day/year); work schedule (part-time, full-time, number of hours if intermittent); salary; and any completed education and training (program title, subject area, number of hours completed, and completion date).
  • Information on how to create a federal resume https://help.usajobs.gov/how-to/account/documents/resume
• Cover Letter, optional, expressing additional information not covered in your resume.
• Transcripts, if specific educational requirements are indicated in this job announcement. Unofficial transcripts or any report listing institution, course title, credits earned (semester or quarter hour) and final grade is acceptable. It is your responsibility to provide adequate proof that you meet the educational requirements.

Submit one or more of the following to support your eligibility(s) to apply to this job announcement:

• SF-50, "Notification of Personnel Action" (current/former federal employees): Most recent Promotion, Within Rate Increase (WRI/WGI), or Appointment/Conversion SF-50 or Notification of Personnel Action showing you are/were in the competitive service and the highest grade or promotion potential held.
• Career Transition Assistance Program/Interagency Career Transition Assistance Program documentation, if applicable(e.g., Certification of Expected Separation, Reduction-In-Force Separation Notice, or Notice of Proposed Removal; SF-50 that documents the RIF separation action; and most recent performance appraisal.) For more information see the OPM Guide to Career Transition.

Failure to submit any of the above mentioned required documents may result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all required documents have been submitted.

If selected for the position you MUST submit: A copy of your most recent performance appraisal/evaluation and incentive awards, you received in the last 5 years. The assigned HR Specialist will verify review this documentation to ensure selectee has at least a satisfactory performance rating before setting the entrance on duty date. If you do not have your most recent performance appraisal/evaluation, you will be asked to submit a statement as to why it is not available.

Next steps